Creating a Floor plan, Footing detail and Isometric view using AutoCad

AIM:

To create the plan, footing detais and isometric view by using autocad.

1.CS Foundation Details for Load Bearing Wall:

• In this drawing we create a cs foundation deatails for Load Bearing Wall.
• Now we can see the command used for this drawing as step by step.

Step:

1. First check the dimension as we start before a line.
2. Next start with a "L"line command.
3. Draw a line as per dimension.
4. After complete a drawing we need show dimension of Footing
5. Click "DIM"command to create a dimension.
6. And we use a Snipping Tool to take a screenshot.
7. Finally Click Save as to save the picture.

2.C.S Foundation Detalis For Load Bearing Wall Over Spread Footing:

• In this drawing we create a C.S Foundation Detalis For Load Bearing Wall Over Spread Footing
• Now we can see the command used for this drawing as step by step.

Step:

1. First check the dimension as we start before a line.
2. Next start with a "L"line command.
3. Draw a line as per dimension.
4. After complete a drawing we need show dimension of Footing
5. Click "DIM"command to create a dimension.
6. And we use a Snipping Tool to take a screenshot.
7. Finally Click Save as to save the picture.

3.C.S Isolated Footing:

• In this drawing we create a C.S Isolated Footing
• Now we can see the command used for this drawing as step by step.

Step:

1. First check the dimension as we start before a line.
2. Next start with a "L"line command.
3. Draw a line as per dimension.
4. Here we use "F8" orthomod command for draw incliend line.
5. And for Rings we used a "ARRAY" option to mutiple line form Row.
6. After complete a drawing we need show dimension of Footing
7. Click "DIM"command to create a dimension.
8. And we use a Snipping Tool to take a screenshot.
9. Finally Click Save as to save the picture.

4.Line Diagram of Two Bedroom Buildings:

• In this drawing we create a Line Diagram of Two Bedroom Buildings.
• Now we can see the command used for this drawing as step by step.

Step:

1. First check the dimension as we start before a line.
2. Next start with a "L"line command.
3. Draw a line as per dimension.
4. Click "TEXT" command to mention the rooms.
5. Click "MIRROR"command to mirror the object to the opposite site.
6. After YES or NO option ask for object of Mirror is show are to delete.
7. After complete a drawing we need show dimension.
8. Click "DIM"command to create a dimension.
9. And click one dimension and kept the course at a coner side.
10. We use a "Continouse Dimension" for same aligment of dimension.
11. And we Use a "MATCH PROPERTIE" to same dimension text height and width all same.
12. And use a "COPY" command for copy the line .
13. And we use a Snipping Tool to take a screenshot.
14. Finally Click Save as to save the picture.

5.Isometric View Of Steps:

• In this drawing we create a Isometric View Of Steps.
• Now we can see the command used for this drawing as step by step.

Step:

1. First check the dimension as we start before a line.
2. Click a Isometric Drafting to create a Isometric View.
3. Next start with a "L"line command.
4. Draw a line as per dimension.
5. In Isometric have a 3 option to draw.
6. The Isometric Right,Isometric Left,Isometric Top to draw the line.
7. ISometric right goes in Right, top and staright.
8. Isometric Left goes in Left,top and staright.
9. Isometric Top goes on Left,Right and top.
10. Click "TEXT" command to mention the rooms.
11. After complete a drawing we need show dimension.
12. And use a "COPY" command for copy the line .
13. And we use a Snipping Tool to take a screenshot.
14. Finally Click Save as to save the picture.

6.Isometric View Of Gable Wall:

• In this drawing we create a Isometric View Of Gable Wall.
• Now we can see the command used for this drawing as step by step.

Step:

1. First check the dimension as we start before a line.
2. Click a Isometric Drafting to create a Isometric View.
3. Next start with a "L"line command.
4. Draw a line as per dimension.
5. In Isometric have a 3 option to draw.
6. The Isometric Right,Isometric Left,Isometric Top to draw the line.
7. ISometric right goes in Right, top and staright.
8. Isometric Left goes in Left,top and staright.
9. Isometric Top goes on Left,Right and top.
10. Click "TEXT" command to mention the rooms.
11. After complete a drawing we need show dimension.
12. And use a "COPY" command for copy the line .
13. And we use a Snipping Tool to take a screenshot.
14. Finally Click Save as to save the picture.

Result:

In this challenge we learn about Footing details and Isometric views with help of above mentioned commands.