PROJECT-I: AIM: To Estimate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash. INTRODUCTION: Concrete mix design is the process of selecting suitable ingredients for producing concrete of the required strength, Durability, and workability of the structures. Finally, the…

PROJECT 2 : Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads…

PROJECT-1: Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings. AIM: To Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East   c. Develop the following:…

CHALLENGE 9: Creating Bar Bending schedules, Different Door types, and Creation standard drawing templates using AutoCad AIM: To Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad  INTRODUCTION:  To create a Bar Bending schedule, Different Door…

CHALLENGE 10: Creating Kitchen layout, Hatching of Architectural elements, and sectional view of an Industrial Building in AutoCad. AIM: To create a Kitchen layout, Hatching of Architectural elements, and sectional view of an Industrial Building in AutoCad. INTRODUCTION:  To Create a Kitchen layout, Hatching of Architectural…

CHALLENGE 11: Creation of Multiple viewports, Scaling the drawing, and setting in Template in AutoCad AIM: To Creation of Multiple viewports, Scale the drawing and set it in a Template in AutoCad INTRODUCTION:  To Creation of Multiple viewports, Scale the drawing and setting in the Template in AutoCad. There…

CHALLENGE 12: Creating various 3D Models like Furniture, Footing, Girder, Column drop with panels, and Gable Walls in AutoCad AIM: To Create various 3D Models like Furniture, Footing, Girder, Column drop with panels, and Gable Walls in AutoCad INTRODUCTION: This 3D modelling has 3 types of modelling techniques they are,…

CHALLENGE 13: Creating a 3D Isometric view of various structural elements in AutoCAD. AIM: To Create a 3D Isometric view of various structural elements in AutoCAD. INTRODUCTION: This 3D modeling has 3 types of modeling techniques they are, wireframe modeling, solid modeling, and surface modeling. Creating various 3D Models…

PROJECT-2: Creating a 3D-rendered model for a Residential Building in AutoCad AIM: To Create a 3 dimensional model of the residential building with a rendered view.   INTRODUCTION: This 3D modeling has 3 types of modeling techniques they are, wireframe modeling, solid modeling, and surface modeling. Wireframe…

PROJECT-1: 3D Creation of Ceiling, Roof, Architectural plan, Structural plan, Sectional view, Elevation view, and Camera specific view for a house plan using REVIT AIM: To 3D Creation of Ceiling, Roof, Architectural plan, Structural plan, Sectional view, Elevation view, and Camera specific view for a house plan using REVIT…

PROJECT-2: Creating Architectural and Structural models with 3D rendering using REVIT AIM: To Creating Architectural and Structural models with 3D rendering using REVIT INTRODUCTION: Revit software is developed by the Auto desk in the year 2002. It is most useful for Architectures, Civil engineers, and MEP engineers by…

PROJECT:3 Creating Conceptual mass in REVIT and Creation of a Sinusoidal curve and a Parametric stadium using Dynamo AIM: To create a Conceptual mass in REVIT and the Creation of a Sinusoidal curve and a Parametric stadium using Dynamo INTRODUCTION: Revit software is developed by the Auto desk in the year 2002. It is most…

PROJECT:4 Usage of Navigation tool, Timeliner, and Clash Detection test using Naviswork AIM: To Usage of Navigation tool, Timeliner, and Clash Detection test using Naviswork INTRODUCTION: Revit software is developed by the Auto desk in the year 2002. It is most useful for Architectures, Civil engineers, and MEP engineers…

CHALLENGE 1: IDENTIFICATION OF CRACKS. QUESTION NUMBER 1: a)                                                                     b)   …

CHALLENGE 2: Structural dynamics QUESTION NUMBER 1: Differentiate Static analysis and Dynamic analysis by properly representing pictures  ANSWER: The nature of loading governs the kind of analysis to be performed on the structure. The loads are divided into two basic categories Static Loads are the loads, the…

CHALLENGE 3: Question 1: A five-story structure with 5 translational DOF is shown here. Each story has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived. The fundamental period of vibration (T1 = 2 seconds)…

CHALLENGE-4 Concept on the positioning of Columns Question 1: Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, and lines depict beams). Look into aspects of symmetry, redundancy, and bi-directional stiffness and ductility. ANSWER: Investigation…

CHALLENGE-5 Conceptual design of a building with columns and shear walls QUESTION 1:The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements, (a), (b), (c), all with the same total cross-sectional…

CHALLENGE-6: Modelling of 25 storeys building with the specified properties using ETABS AIM: Modelling of 25 storeys building with the specified properties using ETABS INTRODUCTION: ETABS is a structural analysis program that deals with multi-storey buildings analysis and design. The software has a friendly graphic user…

PROJECT-1: Comparative study of different-storey buildings for Seismic forces AIM: Comparative study of different-storey buildings for Seismic forces INTRODUCTION: ETABS software is a computer program used by engineers and architects to design and analyze structural systems. ETABS is a three-dimensional finite element…

CHALLENGE 7: Reinforcement Detailing of Beams from ETABS output AIM: Reinforcement Detailing of Beams from ETABS output INTRODUCTION: ETABS is a structural analysis program that deals with multi-storey buildings analysis and design. The software has a friendly graphic user interface. It helps in 3D modeling and analyzing…

CHALLENGE 8: Reinforcement detailing of Columns from ETABS output AIM: Reinforcement detailing of Columns from ETABS output INTRODUCTION: ETABS is a structural analysis program that deals with multi-storey buildings analysis and design. The software has a friendly graphic user interface. It helps in 3D modeling and analyzing…

CHALLENGE 9: Analysis & Design of RCC shear walls in the model using ETABS AIM: To Analysis & Design RCC shear walls in the model using ETABS INTRODUCTION: ETABS software was used to model and design the shear walls for the building. The following steps were taken to model and design the shear walls: 1. A…

CHALLENGE 10: Structural Modelling using Etabs 2023 AIM: Structural Modelling using Etabs 2023 INTRODUCTION: The following figure illustrates the use of ETABS to model the structural behavior of a simple building. The following steps are used to model the building in ETABS: 1. Draw the outline of the building on the screen.…

CHALLENGE 11: Design of Shallow Foundation (Isolated Footings) AIM: To design of Shallow Foundation (Isolated Footings) INTRODUCTION: The isolated footing is the simplest type of foundation. It is a single column of concrete or masonry that transfers a load of a structure to the soil. The footing must be large enough…

CHALLENGE 12: Foundation Design using SAFE AIM: To Foundation Design using safe INTRODUCTION: The safe foundation design is a foundation design that is safe and reliable. It is a foundation design that is ideal for use in areas that are prone to earthquakes or other ground movements. The safe foundation design uses a combination…

PROJECT-2: Design & Analysis of a Hostel building at Guwahati, Assam. AIM: To Design & Analysis a Hostel building at Guwahati, Assam. INTRODUCTION: ETABS software is a computer program used by engineers and architects to design and analyze structural systems. ETABS is a three-dimensional finite element analysis…