MODELING AN AMERICAN CHOPPER AND ITS COMPONENTS USING THE SOLIDWORKS SOFTWARE OBJECTIVE: To create a model of an American chopper bike using solid works and some rendered images of the bike. INTRODUCTION: This is a project report about designing the American chopper bike components and assembling them using Solidworks…

SUNSEEKER PREDATOR YACHT OBJECTIVE: The main aim of this project is to create a surface model of different yacht parts. To assemble the parts modeled using the Solid works2021 software. To create a photorealistic model of the yacht and render the model using the Solid works Visualization software.  The following are the…

FRONT VIEW TOP VIEW: SIDE VIEW: AXIS SYSTEM:          

AIM: To Create the Core and cavity blocks for the switch bezel with the help designed switch bezel. At the end perform a parting line transition for the core and cavity operation for the model.   PROJECT DETAIL Here the part body of the switch bezel was provided as in OEMs. we need to create Core & Cavity and…

AIM: To Create the door handle with rib and screw boss plastic component with the help of class A and create Class B Surface & Class C Surface. At the end perform a close surface operation on the final close surface of the model. PROJECT DETAIL Here the class A surface of the door coin holder was provided as in OEMs.…

Create the Door Trim Lower Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  PROCEDURE: Verify Class A Tooling axis Draft analysis…

Create the Dog House for the Door Trim considering the design rules mentioned in the video.  "C" is where the doghouse contacts the backside of the surface  Doghouse wall thickness at the intersection of the part wall ( C ) should be 40% or less than the main wall stock ( T ).  The height of  ( B )…

    BENCHMARKING: Benchmarking in the automobile industry involves a structured comparison between similar production, services or process on some dimensions of performance. Process of benchmarking Between similar process in the same factory Between different factories Between different competing organizations Between…

Under body coating: In Indian road conditions, a cars underbody is most prone to corrosion. Underbody coating provides long term protection from corrosion to car’s underbody. It also protects parts like internal body panels, frame rails and other inner cavities that are not physically accessible but are prone to…

Design Hood Outer Panel, Inner Panel, and the necessary reinforcements by following the Master Section mentioned with the Design parameters explained in the videos. HOOD: The hood or bonnet is the hinged cover over the engine of motor vehicles. Hoods can open to allow access to the engine compartment for…

SECTION MODULUS CALCULATION AND OPTIMIZATION Section properties are vital in structural analysis and design which is efficient to increase the load bearing capacity by optimizing the shape of the section. Section modulus: the ratio of total moment resisted by the section to the stress in the extreme fiber. It gives us…

Calculate the Wheel Arch gap at required points and check whether the car passes the European standard. Wheel arch: The wheel arch is the semi-circular part positioned above the wheel of a vehicle. The wheel arch is a part of the fender and Curvature in shape. While designing the Wheel arch it should be…

 Design a front fender from the given skin data and the master section provided with Drip mounting. Fender: A fender is a part of an automobile that frames a wheel well (Fender underside). Its primary purpose is to prevent sand, mud, rocks, liquids, and other road sprays from being thrown into the air by the rotating…

To Create an assembly by developing the essential flanges for the outer roof and creating the reinforcements. Roof: An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other…

Use the provided styling surface to come up with a back door design, use appropriate design methodologies, and provide the necessary reinforcements and embosses. BACK DOOR: An automobile back door or Tailgate is the panel that covers an automobile’s boot (or trunk). It enables access to the main luggage compartment.…

Title of the Project: Advanced Sheet Metal Design Using NX Cad Challenge_1_Casing Design Objective: To design a sheet metal model of the casing using the NX CAD tool. Introduction: Sheet metal: It is formed by an industrial process into thin, flat pieces, It is one of the fundamental forms used in metalworking and it can…

TITLE OF THE PROJECT: Advanced sheet metal design using Siemens NX cad - Box Assembly. OBJECTIVE: To design a box assembly and create a draft of it using the Siemens NX Sheet metal application. Introduction: Sheet metal: It is formed by an industrial process into thin, flat pieces, It is one of…

  OBJECTIVE: - To design an odd shaped enclosure and create a draft of it using Siemens NX Sheet metal application. DESIGN METHODOLOGY                                                                                                         …

Title of the Project: To design a Bracket using Siemens NX Sheet metal application. DESIGN METHODOLOGY:                                                                                                                    …

Title of the Project: To design a Bracket using Siemens NX Sheet metal application. DESIGN METHODOLOGY:                                                                                                                    …

After the assembly of butterfly valve,the datums A,B,C,D are given. 2.Datum target areas A1,A2,A3 are given to the ears of the body with Perpendicularity tolerance and position tolerance. 3.Other tolerances like profile of a surface,flatness are given.Position tolerances with respect to the axis of B,C,D datums are given…

Aim: Prepare a table that includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP, and LTO-type lithium-ion cells. Give your detailed explanation of it. Aim: Compare the differences between each type of Li+ion battery based on their characteristics. Battery: A Battery is…