AIM: The main objective of the project is the given sheet metal component HOOD assembly has to be meshing for structural analysis using the ANSA (Automatic Net generation of Structural Analysis) software for solving the issues and improves the quality of the component to make the product safe. In this project we applied…

OBJECTIVE:      The main objective of this Challange is the given shell element has to been meshing for Structural Analysis using ANSA (Automatic Net generation of Structural Analysis) Software for solving the problem by given eligibility criteria to improve the goodness of the product before into the manufacturing…

AIM: The main objective of the Tool test is to perform the Volume mesh on the given CAD – Intake Manifold under the given Quality criteria. PROCEDURE: Open the latest version of ANSA software in your system. Import the given sheet metal cad geometry file (.step) in the ANSA, it will automatically change their file…

AIM:      The main objective of the Challange is to perform the Volume mesh on the given CAD – Rearview Mirror under the given Quality criteria. PROCEDURE: Open the latest version of ANSA software in your system. Import the given sheet metal cad geometry file (.step) in the ANSA, it will automatically…

AIM: The main objective of the challenge is the given Door assembly has to been connected as per the requirements. COMPONENTS:  The Main components present in Door assembly is, Car Exterior Car interior Hinge Weatherstrip Door window Door latch PROCEDURE: Open the latest version of ANSA software in your system. Open…

AIM:   The main objective of this challenge is to make some morphing changes on the given sheet metal component. Morphing:       Morphing is an advanced CAE technique, which is used to change the shape of the mechanical parts or assemblies without the need for a CAD system. The function of the Morphing…

AIM:         The main objective of the project is the given sheet metal component Dashboard assembly has to be meshing for structural analysis using the ANSA (Automatic Net generation of Structural Analysis) software for solving the issues and improves the quality of the component to make the product…

The suspension is the system of tires, tire air, springs, shock absorbers, and linkages that connects a vehicle to its wheels and allows relative motion between the two. Suspension systems must support both road holding/handling and ride quality, which is at odds with each other. The tuning of suspensions involves finding…

AIM: The main objective of the Challenge is to mesh the given component called Bracket with a target length of 5mm and to make the 1D elements like Rod, Beam, and Bar with the given cross-section and D.O.F(Degrees of freedom) by using the Hypermesh software. GIVEN DATA: a)Rod Element: Translational DOF should be constrained…

AIM The ultimate aim of this challenge is to perform the mid-surfacing and meshing on the given automobile BIW component 'HOOD' as per the industrial standards of quality criteria by using HyperMesh software. GIVEN DATA HOOD: Hood is the Automotive component, which is located in the front of the car and cover's the engine. It…

ELECTRIC VEHICLE: An electric vehicle (EV) is a vehicle that uses one or more electric motors or traction motors for propulsion. An electric vehicle may be powered through a collector system by electricity from off-vehicle sources or may be self-contained with a battery, solar panels, fuel cells, or an electric generator…

OBJECTIVES: The main objective of the challenge is to perform the 3D mesh on the given 3 models with the required element size and Tet collapse in hypermesh GIVEN DATA: Model 1: Element size as Min-2, max-7, Target-5, and Tet collapse - 0.150 Model 2: Target as 3 and Tet collapse - 0.150 Model 3: Target as 6 and Tet collapse…

OBJECTIVE: To Mesh the given frame and make the connection as per the specified parts GIVEN DATA: Mesh Criteria: Create a connector and Attach the various parts of the given model  Right_Rail_2 & Front_truss_1:- Seam-Quad(angled+capped+L) Left_Rail_2 & Front_truss_1:- Quad elements Front_truss_2, Front_truss_1…

AIM: The Ultimate aim of this project is to design an electric three-wheeler for cargo segments as per the ARAI and ICAT regulations. SOFTWARE'S USED: For Design - NX CAD For Meshing - Hypermesh & ANSA For Analyze - ANSYS For Rendering - Keyshot ELECTRIC VEHICLE: An electric vehicle (EV) is a vehicle that uses one…

OBJECTIVE: To generate the mid surface, clean up geometrical errors and assign properties to the materials of a given car door plastic panel as per the quality parameters. MESH QUALITY CRITERIA: Target element length = 4mm CAD MODEL: The part is the inner portion of the car door, which is made of plastic. PROCEDURE: The…

OBJECTIVE: To generate the mid surface, clean up geometrical errors, and assign properties to the materials of a given Rear-wheel Holder as per the quality parameters. MESH QUALITY CRITERIA: Target element length = 5mm CAD MODEL: The part is the Rear Wheel Holder, which is made of plastic. PROCEDURE: The Rear-Wheel Holder…

BENCHMARKING: Benchmarking is the competitive edge that allows organizations to adapt, grow, and thrive through change. It is the process of measuring key business metrics and practices and comparing them within business areas or against a competitor, industry peers, or other companies around the world to understand how…

UNDERBODY COATING: Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on when the car is just out of the dealership and is clean. But even if you are getting the undercoating applied after a couple of years, it's…

SECTION MODULUS OF AN HOOD Section modulus is a direct measure of the strength of any sectional area of an object about a reference axis(neutral axis). Strength is nothing buy, capable of supporting greater loads, so the higher the strength it has highly capable of supporting greater loads. This strength can be measured…

AIM: To design a Hood of a Car based on Engineering inputs, Design considerations & Safety factors that satisfy the industry's manufacturing requirements and functional requirements using NX CAD. INTRODUCTION:      The hood which is also known as the bonnet is the hinged cover over the engine of a car…

OBJECTIVE: The main objective of the wheel arch challenge is to calculate the wheel arch area and to prove whether the given fender of the car will pass the European standards or not. WHEEL ARCH: Wheel Arch is the semi-circular part of the fender positioned above the wheel of the vehicle. The design of the wheel arch of…

OBJECTIVE: To develop the front fender using NX CAD for the following dimension by using the given Master section. This includes drip area, sill, cowl, A-pillar mounting, and number attachment. INTRODUCTION: The front fender is a part of the vehicle that frames the wheel. The primary purpose of the fender is to prevent…

AIM: Convert the given measurements into a different system of units and find their corresponding conversion factors. GIVEN DATA: Some measurements have been given, Mass (1kg) Length (1m) Time (1s) Force (1N) Stress (1pa) Energy (1Nm) Density (1Kg/m3) Young's Modulus (210Gpa) Velocity (56.33Kmph) Gravity (9.8m/s) Some…

The Roof design has been completed.

AIM: To solve the given equation `F(u)=u^3+9u^2+4u` by using both implicit and Explicit methods with a tolerance of `10^-2` EXPLICIT AND IMPLICIT ANALYSIS: There are two types of approach here Implicit and Explicit, this is used to solve the finite element analysis problems. Implicit and Explicit analysis differ in the…