Aim : To Calculate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash Introduction :                         Concrete mix design is complex material. It's property is fresh as well as hardened…

  1. Aim : To Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction.   2. Introduction : Vaastu Shastra It is the basic needs that needs to be followed for every home that the ancient science of…

  Aim: 1. To draw the architectural drawing of a residential building  Floor Plan  Elevation  Section 2. Structural drawing of a residential building Column Layout Footing Layout  Beam Layout   Introduction:                       The buildings are planned based on the site plan. The structural drawing is about to give…

  To Create Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad Commands used:  Line Block Layer Rectangle Trim Text Copy Offset Fillet Arc Circle Hatch 1.Aim : Create the templates as shown in Figures.   Procedure : Step 1 : Open the Autocad file and set…

 To Create Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad   1. Aim : To Create the layouts of the Kitchen and provide hatches pattern as shown.  Commands used: LINE Offset Fillet Extend Trim DIMLINEAR Hatch DIMTEXT Copy Layer Block Procedure:…

Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad   1.Aim : To Create a layout of the Plan and Section A of the project in Challenges 7, using the template TutorialmArch.dwt in a scale as given in the Figure   Introduction:              …

 Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad  Introduction: 3D model is a type that shows the objects in 3D view. Tools used are extrude,region,shade,union,substract and etc.3D drawing are drawn by using autocad software.   1.Aim : To…

 Creating 3D Isometric view of various structural elements in AutoCAD  Introduction : AutoCad is a software, in that we can draw a 2D and  3D models with some tools. The 2D drawing is converted into 3D based on the views.   1.Aim : To Create a 3D Isometric View of the building with plan and elevation…

  Aim : To Create a 3 dimensional model of the residential building with a rendered view.   Introduction : The main aim of this project is to create the plan in 2d and convert it into 3D using AutoCAD 3Dimensional and Rendering tools.The 3d tools are as folllows. Revolve Extrude Sweep Union Subtract Render…

  1. What is the mode of failure or damage of the beams in the figure above? Are the damages repairable? Elaborate   a)    This crack is formed due to the flexural failure of beam. The flexural strength represents the highest stress experienced within the material at its moment of…

  1. Differentiate Static analysis and Dynamic analysis with proper representing pictures Answer: Static Analysis Load is not variable with time and neglected due to slow applying of load. Static forces does not change in size, position or in direction. Incase of building structures is static, the analysis is not sufficient…

  Aim: To compute Ln , Mn and Γn for each five modes from the given equation. To calculate the effective modal mass Mn* and the modal mass participating ratio for the 5 modes. The mass matrix will be required to evaluate these parameters. To obtain obtain the base shear for each of the 5 modes of vibration and the combined…

Question 1: Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility. Answer : 1. Symmetry a) X-direction : If we see into the above given…

Question 1:The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements, (a), (b), (c), all with the same total cross-sectional area of the shear walls. Compare the three alternatives, taking into account the restraint…

  Aim:  To Model a 25 storey building on ETABS with structural properties as specified. Ground floor or plinth floor level can be taken at a height of 1.5 metres from the base. Each of the successive 25 storeys has a storey height of 3 metres. Introduction:                            ETABS is an engineering software product…

  Aim : To study and compare the results of Factors influencing the dynamic characteristics of different storey building for seismic force Factors influencing the Natural Period of different storey building for seismic force Factors influencing the Mode shape of oscillations of different storey building for seismic force.…

  Aim: To design the beams in detail from the Etabs To provide details of longitudinal and shear reinforcement for the given two continuous beams. To calculate the value of maximum shear force in any one of the spans in the continuous beams. Introduction: Beams are horizontal structural elements used for the supporting…

  Aim:   To run the analysis and design the RCC moment resisting frame of the given ETABS file To sketch the column cross sectional & elevation details or draft it using AutoCAD software. To show shear reinforcement & lapping details as per special confining reinforcement provision of clause 8.1 of IS 13920-2016.   Introduction…

  Aim: To provide cross sectional steel arrangement of the shear wall using design results in ETABS and sketch the elevation drawings of the reinforcement details.   Introduction: ETABS is an engineering software product that caters to multi-story building analysis and design. Modeling tools and templates, code-based load…

  Aim: To model and analyze the G+7 residential building from the given architectural drawings using the ETABS Introduction: ETABS is an engineering software product that caters to multi-story building analysis and design. Modeling tools and templates, code-based load prescriptions, analysis methods and solution techniques,…

  Aim: To design a square footing for a column size of 400x400 and sketch the footing.   Introduction: Footings and other foundation units transfer loads from the structure to the soil or rock supporting the structure. Because the soil is generally much weaker than the concrete columns and walls that must be supported,…

  Aim: To Model the isolated footing provided in week 11 challenge on SAFE and to analyze and design it to verify the size, depth and steel provided as per calculations.   Introduction: CSI SAFE (Slab Analysis by the Finite Element Method) is the best tool for designing concrete slabs and foundations. SAFE provide easiness…

  Aim: To Model, analyse, design, and prepare the construction drawings from the provided architectural drawing of a G+3 Hostel building. To design foundation detail illustrating the pile and pile cap reinforcement, Tie Beam details connecting the pile caps, Column reinforcement, framing plan for the typical floor, and…