1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately.     AIM : To create a new project with architectural template from the file menu.     TOOLS USED : File menu.     PROCEDURE :      1.Firstly,…

1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools.            BIM is nothing but Building Information Modeling. BIM helps Architectural, engineering and construction professionals to improve the way they design, construct and opeate using tools which…

1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created from…

1) Based on the project saved from Week 3, proceed from First Floor Level .Model a Ceiling from architecture tab above the walls at first floor level AIM : To model a ceiling to the previously created project with the help of architectural tab above the walls at first floor level. TOOLS USED : Architecture tab, ceiling,…

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ?    Building codes or standards are a set of guidelines which have predetermined values for different kinds of buildings or types of topographies. These are designed for minimum case ensuring safety and satisfying…

1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project AIM : To Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project. TOOLS USED : Architectural, Grids, Manage. PROCEDURE…

1) Select the type of structure you want to build from one of the three below        a. Multi Unit Residential Apartment        b. Office Buildings        c. School Ans: The type of structure I want to build is Multi Unit Residential Apartment.   2) Assume…

1) What are HVAC systems ? Why are they essential in modeling of buildings HVAC is nothing but Heating,Ventilation and Air Conditioning systems. This is a specialisation engineering discipline that gives clarity about how to provide ventilation and control heat present inside the room and coolness inside the room i.e.,…

1) Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below           a. Using 3D model create a section box           b. To create similar doors and windows in a floor plan layout         …

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. AIM : To create a sinusoidal curve and create a surface out of the curve using dynamo. TOOLS USED : Architectural template, Manage tab, Dynamo, Code block, List, Integer slider, Range, Math sin, Point by coordinates,…

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class AIM : To export architecture and structure model of residential building developed in week 6 to 8 to Navisworks Cache…

AIM : To create a G+4 residential building as per NBC stanndard and make it a central model file with the following: The sloped roof at the top level of the building (10 degrees) Architectural components including furniture and home appliances Room tags and Annotations Section cut through each room either longitudinally…

1.Generate manual wind loading in the design report based IS code as per the following input Basic wind speed = 39m/s Terrain category 2 AIM : To generate manual wind loading in the design report based IS code as per the input. TOOLS REQUIRED : MS Excel, IS code, Calculator, Dimeniosns from TSD model. PROCEDURE : …

1.Summarize your study for the bending moment, shear force and deflection diagrams for the elements of the model BENDING MOMENT DIAGRAM : Bending moment is the plot of bending moment drawn for the whole span of the structure, It gives the idea of how a structure bends when external loads are acted upon a structure.…

Analyze and design a steel building to 10T CRANE as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer the attached plan and elevation. Provide bracings and moment connection for lateral stability.  Consider dead, live, equipment and wind loading. Consider the brick wall loading for 150mm thick and 1.5 KN per…

1. Setup model for RC building design and based on following parameters for cover MEMBERS IN CONTACT WITH GROUND ABOVE GROUND Column 50mm 40mm Beam 30mm 25mm Slab 30mm 25mm Pilecap 75mm   Foundation 50mm AIM : To setup model for RC building design and based on following parameters for cover TOOLS USED : New,…

1. Calculate dead load in design report based on IS code and apply dead load on the model Finishes of 50mm Slab thickness as per the design Brick wall load Roofing load AIM : To calculate dead load in design based on IS code and apply on model. TOOLS USED : Load cases, Full UDL, Area load, Property window. CALCULATION…

1.Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly AIM : Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly. TOOLS USED : Load ,Seismic load , Seismic wizard, Load combinations. PROCEDURE…

    1. Based on the analysis design RC column and beam. AIM: To design RC columns and beams based on analysis. TOOLS USED : Frame, structure window, Analysis(static check),1st order linear, interactive design. PROCEDURE :  1. Open the previously created file in TSD and and perform 1st order linear analysis.…

1. Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations) AIM : To design the slab and foundation of model.  TOOLS USED : 1st order analysis, Anlaysis All (static), Status, Check Panel, Properties window, Catalogue, Pile…

1.Generate report for the steel building design from challenges 1 – 6 along with the loading summary AIM : To generate report for steel building design with loading summary TOOLS USED : Open, Model Report, Building loading, loadcase summary, show report. PROCEDURE : 1. Open the steel structure and click on Model…

Develop general arrangement for the RC office building. Analyze and design the building as per IS standard code in TEKLA STRUCTURAL DESIGNER. Refer the attached plan and elevation. The building to be designed for dead, live, wind and seismic loading. Report of each member to be generated and extract drawings for structural…

AIM: To Analyze and Design a Boiler shed structure as per IS code in Tekla Structural Designer. TOOLS USED: File. new,Home.,Wall panels.,wind panels.,Grids.,Parallel quick.,Frames.,Loads.,Loadcases.,Beams.,Columns.,Construction levels.,Manage property sets.,Validate.,Construction lines.,Dead load.,Live load.,Wind…