MODELING OF AMERICAN CHOPPER IN SOLIDWORKS INTODUCTION: Solidworks is one of the prominent modelling software avaliable today this software is mainly used to model 3D parts using 2D sketch.It also has the option to specify the material and look of the model which we created.It has other ADD-in features like photoview360…

  SURFACE MODELLING OF SUNSEEKER PREDATOR YATCH      OBJECTIVE: The objective of this project is to design and model all parts of sunseeker  Predator yatch and assembling it to create photorealistic rendering of yacht. INTRODUCTION: In this project the sunseeker predator yatch was taken as conceputal model to understand…

                                                                                          CASING…

      ADVANCED SHEET METAL DESIGN OF BOX ASSEMBLY USING SIEMENS NX-CAD OBJECTIVE: To design the sheet metal box assembly using siemens NX-CAD. INTRODUCTION: Sheet metal is a metal with a small thickness ranging from 0.5-6mm.Which is made flat and thin by rolling or hammering process.sheet metals are widely used in the…

DESIGNING OF ODD SHAPED ENCLOSURE USING NX CAD OBJECTIVE: To design the odd shaped enclosure using siemens NX CAD. INTRODUCTION: Sheet metal is a metal with a small thickness ranging from 0.5-6mm.Which is made flat and thin by rolling or hammering process.sheet metals are widely used in the manufacturing industry due to…

DESIGNING OF SHEET METAL BRACKET USING NX CAD OBJECTIVE: To design sheet metal Bracket using siemens NX-CAD. INTRODUCTION: Sheet metal is metal formed by industrial process into thin flat pieces.Sheet metal is one of the fundamental form used in metalworking and it can be cut and bend into variety of shapes.The thickness…

DESIGNING OF SHEET METAL BRACKET USING NX CAD OBJECTIVE: To design sheet metal Bracket as per requirements using siemens NX-CAD. INTODUCTION: Sheet metal is metal formed by industrial process into thin flat pieces.Sheet metal is one of the fundamental form used in metalworking and it can be cut and bend into variety of…

BENCHMARKING: Benchmarking is a process of measuring the performance of a company’s product,services or processes against those of another business considered to be the best in the industry.The point of benchmarking is to identify the internal opportunity for improvement. In automobile industry benchmarking involves…

UNDERBODY COATING: Underbody coatings are the protective coatings used to protect the vehicle chassis from external environment to ensure the integrity and safety of cars.The use of underbodycoating plays a very important role in the service life of of the vehicle.In general it is required to spray such a protective coating…

                             DESIGN AND ASSEMBLY OF HOOD USING NX-CAD Objective: To design hood outer panel and reinforcement with the given outer hood skin,master section and design parameters. Introduction: Hood is an opening body panel that covers the engine in the front of the vehicle.The hood is also considered an…

OBJECTIVE: To design the drip area,bumper mount region,A pillar mount region and sill mount region from the given fender skin. FROND FENDER: Fender is the body part above the front wheels of the car.The fender covers the wheel to prevent damage to the car body due to rocks thrown at the body by tires.The fender is also…

SECTION MODULUS: Section modulus is a direct measure of strength of any sectional area of an object about an referance axis(neutral axis). Strength is nothing but,capable of supporting greater loads,so higher the strength it has a high capable of supporting greater loads. Section modulus represented with a symbol of ‘S’…

ROOF CHALLENGE: Introduction: The roof part which starts from A-pillar and goes upto D-pillar.The roof purpose is to provide cover to the passenger inside the car and protect the passenger from elements like sun,rain,wind,etc.The roof also prevents unwanted object from falling inside the car.Roofs are generally made up…

BACK DOOR CHALLENGE: Inroduction: Here I have designed a back door for a hatchback where the hinge at roof level .Similar to the hood and side doors  back door is a swinging/closure commodity in a car.It consists of an outer and inner pannel.It is a very critical component because of pedestrain safety luggaging space.…

DRAFT: Draft is providing angle or tapers on product features such as wall ribs,posts or bosses that lie parallel to the direction of release from the mold eases part ejection. DRAFT ANALYSIS: The Draft Analysis command enables you to detect if the part you drafted will be easily removed.Draft analysis is performed…

                                                   Plastic Design Base…

                                                   Switch Bezel design…

                                                                                           …

                                                    Parting Line…

             DESIGNING RIB FEATURE BASED ON DESIGN RULE Aim: To design ribs on the coin holder considering every design rule coinsidered in industry. Rib design: Ribs provide a means to economical stiffness and strength in molded parts without increasing the wall thickness.They also facilitate, Locating and arresting components…

                                                                 Screw boss and Dog house design Screw boss:             …

                      DOOR APPLIQUE DESIGN WITH ENGINEERING FEATURES Heat staking: Heat staking is an assembly method that uses the controlled melting and reforming of a plastic stud or boss to capture or lock another…

AIM: To design a B-Pillar from the provided class-A surface Abstract: This report describes the designing/approach of designing followed in the industries,In this model we had to create closed solid body from the given class-A surface and later work on engineering features considering every standard design rules followed…

                                                         …