MODELING AND RENDERING OF AMERICAN CHOPPER USING SOLIDWORKS OBJECTIVE    The main objective of this project  is used to create a model of different parts of the American      chopper in solidworks    How to assemble these parts    To do a photo realistic rendering…

MODELLING AND RENDERING OF YACHT USING SOLIDWORKS   OBJECTIVE    The main objective of this project  is used to create a model of different parts of the YACHT in solidworks    How to assemble these parts    To do a photo realistic rendering of a chopper in solidworks software itself…

Aim: create the base  bracket plastic component through the given class A surface....... Class A surface   Step 1: check the connectivity of class a surface and inside that there is no gap in the component and we can visually check it by clicking boundary command. Step 2: create the tooling axis of the component…

Objective: *To design switch bezel. *Creation of B class and C class and tooling axis. *Provide the thickness of 2.5 mm by converting close surface into solid inside in part workbench. *Performing draft analysis to verify the creation of the tooling axis and C Class surface. THE GIVEN CLASS A SURFACE:   INTRODUCTION:…

Design of COIN HOLDER with the help of CATIA V5 *Objective:  To design coin holder with respect to the class a surface Create class b surface and class c surface and the tooling Convert those kids surfaces in a close body and make it into the solid body provide the thickness of 2.5 mm Performing draft analysis to…

Objective... *To create Core and cavity with the help of given class a surface. *To create parting surface and their intersection of core design cavity design and parting surface.... Core and cavity design  *The mold Core and cavity are the saved section in other half of the mould tool which give the plastic product…

Design of BUMPER with the help of CATIA V5 *Objective: * To design BUMPER with respect to the class a surface. *Create class b surface and class c surface and the tooling Axis *Convert those class A surfaces in a close body and make it into the solid body provide the thickness of 2.5 mm *Performing draft analysis to verify…

Design of DOOR HANDLE with the help of CATIA V5 *Objective: * To design DOOR HANDLE with respect to the class a surface. *Create class b surface and class c surface and the tooling Axis *Convert those class A surfaces in a close body and make it into the solid body provide the thickness of 2.5 mm *Performing draft analysis…

 Design of DOOR TRIM with the help of CATIA V5 *Objective: * To design DOOR TRIM with respect to the class a surface. *Create class b surface and class c surface and the tooling Axis. *Convert those class A surfaces in a close body and make it into the solid body provide the thickness of 2.5 mm *Performing draft analysis…

  Design of DOOR TRIM with the help of CATIA V5 *Objective: * To design DOOR TRIM with respect to the class a surface. *Create class b surface and class c surface and the tooling Axis *Convert those class A surfaces in a close body and make it into the solid body provide the thickness of 2.5 mm *Performing draft analysis…

MODEL 1 MODEL 2....

Design of A PILLAR MASTER SECTION with the help of CATIA V5 *Objective: * To design A PILLAR MASTER SECTION with respect to the class a surface. *Create class b surface and class c surface and the tooling Axis *Convert those class A surfaces in a close body and make it into the solid body provide the thickness of 2.5 mm…

WHAT IS Benchmarking? Benchmarking in an automotive involves a structural comparison between similar product services or processes on some dimension of performance.It is a technical word of comparison it's about a study of existing product by doing a benchmarking we can sorting of a one product respect with processes specs…

UNDERBODY COATING EXPLANATION , THEIR TYPES AND THEIR PROS AND CONS. Underbody Coating is a sprayable coating, which protects the under surface of the vehicle from corrosion. Underbody coating provides long term protection from corrosion to car's underbody. It also protects parts like internal body panels, frame…

OBJECTIVE: Design Hood Outer Panel, Inner Panel and the necessary reinforcements by following the Master Section mentioned in the challenge. Explain the hood and its components, their parts, Explain the design methodology and the manufacturing process And the feature used to design the  hood components.  …

OBJECTIVE: To define the wheel arch. Purpose for creating the wheel arch. What are the standards value of the wheel arch. How to measure the clearance for the given class A.           WHEEL ARCH AREA: It is a Semi-circular part of Fender which is placed above the wheel. The…

Objective: To create mountings for the sill , bumper , baffle (splash), and A pillar according to the engineering standard that you learned and according to the master section given in the challenges. The master section is…… Mounts: SILL A PILLAR BUMPER DRIP PROCEDURE TO CREATE THE MOUNTINGS: First check…

AIM: Use the Section from your Hood design and calculate the Section Modulus using the formula  S = I/y Come up with a new section that has an improved Section Modulus compared to the previous one and mention what changes you made which resulted in the increased strength.…

Objectives:   To design the Roof Reinforcement and Bow roofs for the given Roof styling using NX CAD software and to perform the calculations to determine whether the positioned Bow roofs are as per the Heat Distortion and Snow Load conditions.   Introduction: An automobile roof or car top is the…

OBJECTIVE:  1.the styling surfaceis given and by using this styling surface, develop a back door using appropriate design methodologies. The objective of this project is to design a BIW Back Door of a car And create an Inner Panel , Outer Panel , and Reinforcements for the Hinges, Gas stay, Wiper Motor, and Latch…

Objective: Download following connectors & Connector clip cad data from given link & define it as Electrical Connector using Electrical Part design Workbench. Define all the necessary properties to Connectors & Clip.   Deutsch DT06 – 08SA ( https://www.te.com/usa-en/product-DT06-08SA.html) …

OBJECTIVE OF CHALLENGE WEEK 3 Q1. Download following cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties. P clamp Note: if you face any issue with point definition, point selection, Right-click on the point definition window and use the reset option.…

Objective: Q1. Route the following harness layout in Electrical workbench. Make assumption for harness bundle diameters. Use Following connectors as shown in layout diagram. Add protective covering on all branches connected to DT06-2S & DT06-4S connectors. Keep end extremity at 30mm (from connectors end)   Download…

Q1. Route the following harness layout in Electrical workbench. Make assumption for harness bundle diameters. Use the connectors provided. After completion of routing, Check the bundle Continuity. Add snap of result in submission Add annotation to all connectors. Make an assumptions for annotations like connect 1 , 2 etc…

objective: Q1. Flatten the harness assembly completed in “ week 4 challenge”. Place the flattened view on drawing sheet. Ensure bundles with protective coverings has different visuals on drawing view. Procedure: Open the assembly model already created in Catia V5. Now open the new product file and select Electrical…

Development of a Door Trim panel   Creation of CAD model considering following inputs as like in OEM and tier1 companies a) Class A surface b) Nominal thickness : Refer master sections c) Attachment strategy :  Find a attachment strategy for the door panel complete work. Use Push pin with Dog house for Lower…

Statement of assignment: Route the Wiring harness on Given Engine and Prepare flatten view drawing in CATIA V5. Application of all Packaging rules, Industry best practices studied in this course shall be demonstrated in design. Apply Protection coverings as required. Available connector 3D data can be used, or you can…

Statement of assignment: Route the Wiring harness on Given car body and Prepare flatten view drawing in CATIA V5. Application of all Packaging rules, Industry best practices studied in this course shall be demonstrated in design. Apply Protection coverings as required. Available connector 3D data can be used, or you can…