1) Light switch, Fuse, Ammeter, Ignition Switch, Battery, Starter, Ignition coil, Circuit breaker, Generator, Distributor, Current and voltage Regulator, Foot Selector Switch. 2) a) Battery: A battery is a collection of cells. It is used to store energy. The chemical reaction occurring in the cell of a battery results…

METHOD 1:  Project name--VI_myway.m (Attachments--VI_myway_output_curve.fig & VI_output_myway.txt) clear all close all clc VI=xlsread('C:\Users\Nikhil\Documents\MATLAB\project\VI.xlsx'); %Read the data which was provided by skill lync x=VI(:,1); y=VI(:,2); % store entire row of first column in x and store entire…

                                    Schematically shown in the Figure Theory-      What is a DC Motor?--> A DC motor is defined as a class of electrical motors that convert electrical direct current electrical energy…

Aim:- To develop a double-acting actuator model using Simscape Multibody and Simscape components. The mechanical system of the cylinder needs to be built using Simscape Multibody library components/blocks, and the hydraulic system needs to be modeled using Simscape library physical components. Objective:- The…

Aim: To compute the fuel economy numbers for the given vehicle (kmpl) on the urban cycle (UDDS) and highway cycle (HWFET). Also, to analyze and understand the vehicle operation. Solution: what is the conventional vehicle? Gasoline and diesel vehicles are similar. They both use internal combustion engines. A gasoline…

Aim: The task of this project is to quantify the improvement in fuel economy numbers for the hybrid vehicle (kmph), compared to the conventional vehicle, on the urban cycle (UDDS) and highway cycle (HWFET). Also, to analyze and understand the vehicle operating points in terms of engine and motor speed, torque, transmission…

Aim: To prepare a table that includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP, and LTO type of lithium-ion cells. Give your detailed explanation of it and also to compare the differences between each type of Li+ion battery based on their characteristics. Solution:…

Aim: To download the file from the link, simulate the 3 test cases from the harness dashboard, and write a detailed report on the results. To download the file 'CLICK HERE'. Solution:  --------------- Q1 --------------- Step-wise solution for opening the file in Matlab Step 1: After downloading the folder…

Aim: To prepare a detailed battery pack drawing along with its enclosure. Solution: The given information is -  1) Battery pack energy must be 18 kWh and 2) The cell used is: ANR26650M1-B So, the detailed specification of the cell would be, Manufacturer of this Li-Ion cell ANR26650M1-B is LithiumWerks. ANR26650M1-B…

Aim: To build a 10-cell series lithium-ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB. Solution: A simple thermal model is used to model battery temperature. It is assumed that heating is primarily from internal…

Aim: To download the following connectors & Connector clip cad data from the given link & define it as Electrical Connector using Electrical Part Design Workbench. Define all the necessary properties of Connectors & clips. Deutsch DT06 – 08SA ( https://www.te.com/usa-en/product-DT06-08SA.html) Tyco…

Aim: To download the following cad data & define it as Electrical support using an Electrical Part Design Workbench. Define all the necessary properties. Solution:  1) P Clamp -  Cable clamps are add-ons for twine and cable. They are used to package deal, clip, clamp, label, guide, and shield wires and cables.…