Part 1 : Calculate the Concrete Mix Design for M35 grade concrete with fly ash 1 STIPULATIONS FOR PROPORTIONING a) Grade designation                  : M35 b) Type of cement                      : OPC 43 Grade conforming…

AIM: Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from…

Q. 1.Create the geometries from P1 to P10 using all the coordinates system methods. You need to use the Line tool to create the geometries. Where required you need to use the circle tool.Please read the drawings and find out the missing dimensions before working on the sketches. Note: Use the Imperial Template and the…

1.C1 Draw the C.S. LOAD BEARING WALL OVWER SPREAD FOOTING By using AUTO CADD Software. AIM : To draw the C.S. LOAD BEARING WALL OVWER SPREAD FOOTING By using AUTO CADD Software. PROCEDURE : 1.Open the Auto cad software. 2.The user inter face opened then go to the application menu Select the New Template file  3.Then…

1.Draft the figure by using Autocad in the Decimal units  AIM: To draw the given drawing using AutoCAD software in decimal units  PROCEDUE: 1.In the command line  type Units and select Decimal unit 2. In The command line type PL (Polyline) Then specify start point 1,1 In the command line type @3<0…

1. Residence Plan: Sketch the layout of a residence as shown in the Below Figure . Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors. AIM : To Sketch the layout of a residence as…

  1. Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left AIM: To Create a column schedule as shown in the figure Introduction:The…

1. Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed. Note: All dimensions are in mm. AIM: To Draw the elevation…

1. Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required.   AIM : To Create the Plan and Sections.   INTRODUCTION…

                              PROJECT DESIGN AND DRAFT A LAYOUT OF A RESIDENTIAL BUILDING a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East  c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations,…

Q: 1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock, respectively.…

1.Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks whereverrequired. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and othersas per the standards. AIM: To Create the Kitchen Layout and to  Also, use proper dimension techniques to dimension…

1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout.…

  1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. Aim:  To create a 3D model of the furniture element. Commands used: Extrude. Offset. UCS. Box. Union. Subtract. Move. 3d orbit. Loft. Sweep. Cone. Region. Boundary. Procedure: Step1: Open AutoCAD, select imperial…

1Q] Create a 3D Isometric View of the building with plan and elevation given.        AIM:- To create a 3D isometric view of the given building with plan and elevation.    INTRODUCTION:-  An isometric drawing is a 3D representation of an object, room, building or…

CREATING A 3D RENDERED MODEL FOR A RESIDENTIAL BUILDING IN AUTOCAD Aim: To create a 3 dimensional model of the residential building with a rendered view in AutoCAD. Introduction: Rendering is a process of creating a raster image based on 3D objects in a scene. A renderer is used to calculate the appearance of the material…

  REVIT  Challenge 1    1Q.From the file menu, create a new project (Structural / Architectural / Construction template) and name the project appropriately. Aim:  To Create a new project and name the project appropriately Introduction: Revit is an Autodesk product and is a building information…

1Q.What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. AIM : To Summarize the features of BIM and benefits of using BIM over 2D CAD tools. Procedure : BIM is an acronym for Building Information Modeling or Building Information Management. It is a highly collaborative process that allows…

1Q) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level AIM : To Model a celiling from the architecture tab above the walls at the first-floor level Procedure : Open the Revitsoftware Then open the week…

                                              REVIT PROJECT               Creating Architectural and Structural model with 3D rendering using REVIT   AIM: To Creating…

Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using DynamoIntroduction:Dynamo is an open source visual programming language for Revit, written by designers and construction professionals. Its a programminglanguage that allows you to type lines of code;  while also creating…

1Q) What is the mode of failure or damage of the beams in the figure above? Would you characterize the case as damage or as a failure? Are the damages repairable? Elaborate. a) Observations: Concrete crushed and the reinforcement is exposed. Concrete spalled beyond the reinforcement which may be a sign of rupture. Beam…

PROJECT: Usage of Navigation tool, Timeliner and Clash Detection test using Naviswork   1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class Aim:- Exporting the Revit architecture…

PROJECT: Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork   1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class Aim:- Exporting…

Question 1: What is the mode of failure or damage of the beams in the figure above? Are the damages repairable? Elaborate a) Observation: concrete crushed and the reinforcement is exposed. concrete spalled beyond the reinforcement which may be a sign of rupture. beam top portion looks safe because of the flange advantage…

1Q). Differentiate Static analysis and Dynamic analysis with proper representing pictures (30 marks) Ans: The main difference between static and dynamic analysis is Time. If the load is applied so slowly, that inertia effects won’t play a role, all you need is static analysis. Dynamic analysis handles impacts…

Understanding the concepts on Degrees of Freedom   Q] A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived. The fundamental period of vibration (T1 = 2 seconds)…

  Concept on positioning of Columns   Question 1: Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility.   Ans: 1.Symmertry…

  Conceptual design of a building with columns and shear walls   Question 1: The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements, (a), (b), (c), all with the same total cross-sectional…

Modelling of 25 storey building with the specified properties using ETABS Challenge 6 – ETABS modelling of a 25 storey building Model a 25 storey building on ETABS with structural properties as specified below. Ground floor or plinth floor level can be taken at a height of 1.5 metres from the base. Each of the successive…

                                         Project  Comparative study of different storey buildings for Seismic forces Factors influencing the dynamic characteristics of a building Factors influencing the dynamic…

                         Reinforcement Detailing of Beams from ETABS output Challenge 7 – Detailed design of concrete buildings -1 Detail design of beams in Etabs 2018.The ETABS file for a G+4 building is provided. Run the analysis and design the RCC…

Reinforcement detailing of columns in Etabs 2018. The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment Resisting Frame. The following challenge deals specifically with two columns at the following grid intersections. 3A 3B Provide details of longitudinal reinforcement for the two columns,…

                                                Structural Modelling using Etabs 2018 The architectural drawings for a G+7 residential building in zone 5 has been provided. The floor plan is the same…

DESIGN OF SHALLOW FOUNDATION ISOLATED FOOTING   Aim:- To design a square footing for a column of size 400x400 using some of the informations such as  The compression axial load for the load combination of (1.5 DL + 1.5 LL) = 2000 KN. The safe soil bearing capacity = 150 KN/m2 at a depth of 2 metres below E.G.L.…

QUESTION:1 Model the isolated footing provided in week 11 challenge on SAFE. Analyze and design it to verify the size, depth and steel provided as per calculations. ANS: AIM: To Analyze and designthe isolated footing from week 11 challenge on SAFE To verify the size, depth and steel provided as per calculations.   INTRODUCTION:…

Project 2_Design & Analysis of a Hostel building at Guwahati, Assam   In this project, participants will get to experience the entire design process from modelling, analysis, design, and preparation of construction drawings. The architectural drawings of a G+3 RCC building is provided. The following information…

  Analysis & Design of RCC shear walls in the model using ETABS The etabs file for a G+6 building is provided. Run the analysis and design the RCC shear walls (show in the etabs model). The following challenge deals specifically with the shear wall of size 300x1500 at grid A-11 in the structural model. Extract…