Title of project: Concept modelling of alloy wheel. Objective: To create surfaces of the entire alloy wheel. Tools used: Freeform blend tool, CV curves, line, circle, skin, align tool, planar, trim, project, intersect, extend, detach tool, transform tools etc. Introduction: Introduction to surface continuities and its…

  Title of project: Concept modelling of car bumper Objective: To create surfaces of the entire car bumper using 3 quarter images of the car. Tools used: Freeform blend tool, CV curves, line, circle, skin, align tool, trim, project, intersect, extend, detach tool, transform tools, fillet, dimension box,rail command…

Title of project: Concept modelling of car fender Objective: To create surfaces of the entire car fender using isometric image of a car. Tools used: Freeform blend tool, CV curves, line, skin, align tool, trim, project, intersect, extend, detach tool, and transform tools, fillet, rail command, Ms Draft etc. Introduction:…

Title of project:concept modelling of steering wheel. Objective: To build a surface model of a steering whell using 3 quarter views of the steering wheel. Tools used: Freeform blend tool, CV curves, line, skin, align tool, trim, project, intersect, extend, detach tool, and transform tools, fillet, rail command, Ms Draft,duplicate…

Title of project: concept modelling of automotive seat Objective:To build automotive seat using visualisation from three quarter views. Tools used: Freeform blend tool, CV curves, line, skin, align tool, trim, project, intersect, extend, detach tool, and transform tools, fillet, rail command, Ms Draft, duplicate curve,…

Title of project: concept modelling of KIA sport age 2016 model Objective: to create entire KIA sport age surface model with better continuity using given reference images Tools used: Freeform blend tool, CV curves, line, skin, align tool, trim, project, intersect, extend, detach tool, and transform tools, fillet, rail…

  title: rendering project objective:to render all the projects done previously . tools used :hardware shaders. procedure: 1.open autodesk alias. 2.apply visualisation to the model. 3.from control paael change the setting from modellng to visualize. 4.there will be a set of shaders. 5.there are shades named lambert…

Door arm rest AIM: to perform draft analysis and make a solid model from the given class a input of door arm rest. Tools used: Boundary, join, multiple extract, bisecting line, draft analysis, intersect, sweep, close body surface, extrapolate, parallel curve, multi section surface, blend, line, point Procedure Creating…

AIM: To create solid models of the given drawings and assemble them in assembly workbench . Tools used Pad, pocket, shell, symmetry, coincidence, constraints, trims, Boolean operations. Procedure Open part workbench Create positioned sketch by selecting a plane and point Using the given drawing s create the sketches of…

AIM: to create a solid model of interior door trim and B side features using given class A input using CATIA Tools used: Line ,point, circle, extract, multiple extract ,trim ,split ,join ,fill, multi section surface, parallel curve, pad ,Boolean operations ,fillet ,chamfer ,feature draft analysis, extrude , offset,sweep,etc.…

AIM: to design hood using the given master section as input and considering all design criteria and make a complete hood assembly   Automotive hood is a component that covers the engine compartment it is a front mounted component of the car .the hood is hinged to the engine compartment and it has several design rules…

  Objective: to design the mountings for drip area, sill mounting area, a pillar, bumper, baffle, a pillar for a car fender using given master section tools used:  curve on surface,offset curve on surface,thicken,sketch,project curve,datum plane,intersecion curve,face blend ,edge blend,emboss, dart etc Description:…

Objective: Section modulus optimization of the hood using NX cad Tools used: Sketch, intersection curve, offset curve, measure, section inertia analysis Description: Section modulus is a geometric property for a given cross-section used in the design of beams or flexural members. Other geometric properties used in design…

Objective: to develop required flanges for the given styling component of the roof using the master sections provided to perform curvature study on the roof at 0Y AND -3Y and endure that the position of bow roof is appropriate and meet the requirements and make sure that roof can withstand when loaded with snow and perform…

Objective: To design the inner panel and required reinforcements for mounting hinge and gasstay and wiper motor assembly for the given class A of the back door. Introduction to back door: The backdoor is a door that gives access to the rear storage compartment of vehicles like trucks, vans, and SUVs. It is made from steel…

Objective:  To design a complete tail lamp assembly from scratch from given classA Surface with attachment features and positive mounting points with all child parts which includes housing, lens, reflectors and make an assembly and child part drawing of the same following industrial standards and ECE regulations.…

SURFACE MODELLING OF Aston Martin ONE-77 Objective:  To design and render  Aston Martin ONE-77 car using surface and solid modelling using solid works  with proper relations and create a final assembly of the Aston Martin ONE-77. Introduction : Solid Works is a solid modelling computer-aided design and computer-aided…

   Lopifit 2.0   INTRODUCTION                                            Treadmill cycle is also…