Kindly find the attached word file.

Project Name: G+1 Floor Residential Plan in conformance to Vaastu Shastra Introduction and Aim: The building is designed as required in line with the project name in conjunction with the requirements as per the applicable IS Codes. The building will be constructed at Visakhapatnam Region with Zone 2 Seismic Zones, 50 m/s…

Week 1-Assignment 1-Module 2 Aim: To create the requested geometries using the different coordinate system entry methods available in AutoCAD. Combination of line and circle tools shall be used as applicable. Introduction: A. AutoCAD – is a computer aided design and drafting software application developed and owned…

Week 2-Assignment 2-Module 2 Aim: To sketch and edit the requested geometries using the different drawing and modifying tools covered in week 2 sessions. Introduction: The topics covered in week 2 which are essentials in plotting the requested geometries are as follows; Drawing Rectangles in AutoCAD, rectangle is a quadrilateral…

Week 3-Assignment 3-Module 2 Aim: To sketch and edit the requested geometries using the different drawing and modifying tools covered in week 3 sessions. Introduction: The topics covered in week 3 (titled Start Advanced Sketching and Editing I) which are essentials in plotting the requested geometries are as follows; Working…

Week 4-Assignment 4-Module 2 Aim: To sketch and edit the requested layout using the different drawing, modifying tools with application of Layer command covered in week 4 sessions. Introduction: The topics covered in week 4 (titled Start Advanced Sketching and Editing II and Drawing Aids) which are essentials in plotting…

Week 5-Assignment 5-Module 2 Aim: To sketch and edit the requested layout using the different drawing, modifying tools with application of advanced editing tools covered in week 5 sessions. Introduction: The topics covered in week 5 (titled Start Advanced Sketching and Editing III and Drawing Aids) which are essentials…

Week 6-Assignment 6-Module 2 Aim: To sketch and edit the requested layout using the different drawing, modifying tools with application of advanced editing tools covered in week 6 sessions. Introduction: The topics covered in week 6 (titled Create and Modify Annotations) which are essentials in plotting the requested geometries…

Week 7-Assignment 7-Module 2 Aim: To plot the Floor Plan and Sections using the proper dimension techniques and dimension styles to document the project. Introduction: Plan, Section and Elevation are different type or view of drawings used in Construction Industry to graphically represent a building design and construction.…

Week 8-Assignment 8-Module 2 Aim: To Design and Draft a Layout of a Residential Building with a Plot Size of 18.3m x 6m facing east using the proper drawing techniques and editing tools with the aid of AutoCAD. Introduction: Plan, Section and Elevation are different type or view of drawings used in Construction Industry…

Week 9-Assignment 8-Module 2 Aim: To create a Bar Bending Schedule, Different Door Types and a Standard Drawing Templates using the proper drawing techniques and editing tools with the aid of AutoCAD. Introduction: The topics covered in week 9 (titled Understanding external references and layout concept) which are somewhat…

Week 10-Assignment 9-Module 2 Aim: To create a Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building using the proper drawing techniques and editing tools with the aid of AutoCAD. Introduction: The topics covered in week 10 (titled Design Center and Tool Palettes Concept)…

Week 10-Assignment 10-Module 2 Aim: To create a Multiple Viewports, Scaling the Drawing and setting in Template using the proper layout techniques and editing tools with the aid of AutoCAD. Introduction:  For these exercises, this is just a matter of applications of what have been covered from week 10 titled Design…

Week 11-Assignment 11-Module 2 Aim: To create a various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad using its basic 3d modelling tools and techniques. Introduction:  For these exercises, this is just a matter of applications of what have been covered from week 11 titled…

Week 12-Assignment 12-Module 2 Aim: To create a 3D Isometric Views of various Structural Elements in AutoCAD. Introduction:  For these exercises, this is just a matter of applications of what have been covered from week 12 titled Getting Started with 3D Modeling. Below are the topics covered from week 11; Solid View,…

Week 13-Project 2-Module 2 Aim: To create a 3D rendered model for a Residential Building in AutoCad. Introduction: 3D modeling is a more advance form of drawing presentation in architecture, and construction. 3D models are used to visualize, simulate and render graphic designs. It gives additional boost to the efficient…

Week 1-Assignment 1-Module 3 Aim: To determine the mode of failure or damage to the beams and check if such damages are repairable or not for the given photos. 1.a)   Observation: Concrete crushed and the reinforcement is exposed. Concrete spalled beyond the reinforcement which may be a sign of rupture. Beam top portion…

Week 2-Assignment 2-Module 3 Refer to below for the differences between Static and Dynamic Analysis with pictorial representation; Static refers to the force that has constant size, position and direction on or within a structure while Dynamic refers to a force on a structure that changes size, position or direction. Static…

Week 3-Assignment 3-Module 3 Aim: To calculate the Seismic Loading Parameters of a five-storey building having a 5 translational DOF. Specific requirements that needs to be calculated for this exercise are listed below;  Ln, Mn and Gn for each of the five modes. Mn* (effective modal mass) and the modal mass participating…