MODELLING OF AMERICAN CHOPPER    …

RADAR MAST:   ASSEMBLY:.       FINAL REPORT:   MODELLING OF SUNSEEKER PREDATOR YACHT OBJECTIVE: To learn and model individual parts of sun seeker predator yacht with appearances. To assemble the individual parts of the yacht with suitable constrains To render the yacht by applying appearances,…

SCREENSHOTS:  

SCREENSHOTS:  

SCREENSHOTS:  

SCREENSHOTS:

SCREENSHOTS:  

SKETCHES: RIB ROOT THICKNESS ANALYSIS:   TREE STRUCTURE:   DIFFERENT VIEWS:   DRAFT ANALYSIS: By doing Draft analysis on Class A surface There is little deviation in draft angle so the issue should be claried to Class A engineer to avoid the errors while manufacturing. The Class A engineer (Styling engineers)…

DOG HOUSE DESIGN FOR DOOR TRIM   Aim: To Create the Dog house for the Door trim considering the design rules and to perform the draft analysis for Class A surface and to create a final closed body and also to perform draft analysis for it.   Objective of the Project: Create the Tooling axis. Design the Class…

Door Trim Lower with Engineering Features Aim: To create the Door Trim Lower Plastic component through the given Class-A surface and also to create the Heat Stakes and the locators considering the design rules for the door applique.   Objectives: Creation of Tooling axis with appropriate draft analysis for given A…

A Pillar design with Master Section   Aim: To create A pillar Design with given Master Section.   Objectives: Creation of Tooling axis with appropriate draft analysis for given A class surface and master section. Creation of B class and C Class surfaces for creating a solid component. Creation of attachment features…

ASSEMBLY WORKBENCH Aim: To create the Part according to the given drawing and to do the assembly with 2D drafting.   MODEL-1: QUICK RETURN MECHANISM   In this quick return mechanisms we required 5 parts. First we create a required 5 parts. Then open the assembly workbench, insert the required part files. Then…

FINAL PROJECT AIM:To design and development of vehicle interior door trim using Catia V5 with given class A surface along with Master section. Also create the Side Attachment features as per design rules.   OBJECTIVE: To create thickened part using master section for reference. To create the mounting features as per…

BENCHMARKING Benchmarking in Automotive Industry: Benchmarking involves a structured comparison between similar products, services or processes on some dimensions of performance. For example it can be used to compare the availability and delivery of features in a product and in this form often provides the basis of consumer…

UNDERBODY COATING Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on when the car is just out of the dealership and is clean. But even if you are getting the undercoating applied after a couple of years, it’s…

HOOD DESIGN OF A CAR   Aim: Design Hood Outer Panel, Inner Panel and the necessary reinforcements according to the given Master section. Thickness of Inner panel is 0.75mm, Outer panel 0.75mm and Reinforcement thickness 1.5mm.   Hood: A car hood, also referred to as a “bonnet” in some countries, is…

SECTION MODULUS OF A HOOD   Section modulus is a direct measure of strength of any sectional area of an object about an reference axis or neutral axis. The strength is nothing but, capable of supporting greater loads, so higher the strength it has a high capable of supporting greater loads. This strength of the section…

FENDER DESIGN- WHEEL ARCH   Aim:  In this challenge to Calculate the Wheel Arc area and prove whether the car will pass the European standards or Not.   Objective : Study about the different wheel arch gap standards. Draw the lines at the required angle and points for the European standard. Measure the distance…

FENDER DESIGN   Aim: To design the fender by using the given master section for drip area and to design the sill, Bumper, Baffle and A-Pillar mount according to the engineering standards.   Objective: Study about fender and its type and the parameters need to follow. Design the drip area according to the given…

DESIGN OF ROOF   OBJECTIVE: Main objective of the project is to create the Roof Sheet metal design in NX cad, and also designing Front roof rail, rear roof rail, bow roof front, bow roof rear, center roof rail and Reinforcement are creating to build the strong roof. Do curvature study on Roof and performance calculations…

CAR BACK DOOR DESIGN   Aim: To design back door of car using given outer class 'A' surface and perform draft analysis.   Back door of a Car: A door which is located at the rear side of a car which gives access for the boot space to store luggage, spare wheel etc. These doors can be operated manually or electric powered.…

WIRING HARNESS DESIGN IN CATIA V5 - 3D MODELING WEEK 2 CHALLENGE   Aim: To define the given Electrical Connectors and connector clips using Electrical Part design Workbench. Deutsch DT06 – 08SA ( https://www.te.com/usa-en/product-DT06-08SA.html) Tyco 174357-2 (https://www.te.com/usa-en/product-2-174357-2.html?source=headermatch)…

WIRING HARNESS ROUTING & PACKAGING RULES WEEK 3 CHALLENGE   Q1. Download following clip cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties. P-Clamp   Ans: Steps: Create two points one as entry and another as exit point.   Create planes at two points and…

WIRING HARNESS DESIGN IN CATIA V5 - 3D MODELING WEEK 4 CHALLENGE   Q1. Route the following harness layout in Electrical workbench. Make assumption for harness bundle diameters. Use Following connectors as shown in layout diagram. Add protective covering on all branches connected to DT06-2S & DT06-4S connectors.…

WIRING HARNESS DESIGN IN CATIA V5 - 3D MODELING WEEK 5 & 6 CHALLENGE   Q1. Route the following harness layout in Electrical workbench. Make assumption for harness bundle diameters. Use the connectors provided. After completion of routing, Check the bundle Continuity. Add snap of result in submission Add annotation to all…

WIRING HARNESS DESIGN IN CATIA V5 - 3D MODELING WEEK 7 CHALLENGE   Q1. Flatten the harness assembly completed in “week 4 challenge”. Place the flattened view on drawing sheet. Ensure bundles with protective coverings has different visuals on drawing view.   Ans: The harness assembly and routing is…

PROJECT-1   Aim: To route the wiring harness on given V16 Engine and to create flatten view drawing in CATIA V5.   Objective: The objective of the project is to route the wiring harness on given Engine and prepare flatten view drawing in CATIA V5. All types of packaging rules have to be considered while routing…

AUTOMOTIVE WIRING HARNESS FOR BACKDOOR     Aim: To route the wiring harness on the given backdoor assembly and prepare the flatten view drawing in CATIA V5.   Objective: The objective of this project is to route the wiring harness and prepare flatten view drawing for the Backdoor of the car. All types of packaging rules…

DESIGN OF A BUTTERFLY VALVE AND APPLICATION OF GD&T   AIM: The objective of this project is to design a butterfly valve and apply GD&T to it'scomponents and final assembly using Siemens NX.   OBJECTIVE: The objective is to design & assemble the components of the butterfly valve using various modeling…