AIM AND OBJECTIVE: • To sketch and model every exterior part of the Boeing 747-8 Aircraft under the part modelling and surface modelling environment using the Solid works. • To assemble the modelled parts in the assembly environment. • To create a photo realistic…

         OBJECTIVE The objective of the project is surface model all the parts of an Aston Martin one-77 and assembling it to create the Photo-Realistic rendering, INTRODUCTION The Aston Martin One 77 is a two-door, two-seater flagship sports car built by the British car manufacturer Aston Martin.…

              Objective: The objective of this project is to understand and demonstrate the design philosophy of a retro American chopper motorcycle model using new age design tool - Solidworks. In the design, assembly and the rendering phases, usage of sketch tools and making sure that…

  Objective: Draft and Design the individual components of a yacht and assemble them together to form a good aesthetical yacht. Introduction: -     A yacht is a sail or power vessel used for pleasure, cruising, or racing. There is no standard definition, so the term applies to such vessels that have…

AIM: To analysis various beams by using finite element analysis process. Objective: The aim of this project is to analyze the performance of three different types of beams under the same bending compare the results for stress, displacement and strain and choose the most efficient beam out of the three. Theory: The beam,…

OBJECTIVE:- Analyse the simulation on two leaf spring model of different material for finding the failure and summerise those thing for improvement. Because Leaf springs are an integral part of your vehicle's suspension system. They are installed to help support the entire weight of your car or truck. Leaf springs…

CONNECTOR CONNECTION POINT   THE CONNECTOR IS FIRST UPLOADED IN THE PART DESIGN WORKBENCH WE DEFINE THE POINTS FOR CONNECTOR CONNECTION AND BUNDLE CONNECTION. • THE AXIS SYSTEMS ARE PLACED ON THE CONNECTOR CONNECTION AND CAVITY CONNECTION POINTS • THE ORIENTATION OF THE AXIS SYSTEM IS NOT SPECIFIC, WE JUST…

FLOW SIMULATION OVER A CYLINDER USING SOLIDWORKS Objective To simulate flow over a cylinder (CFD Analysis) with an assumed initial Velocity for an External flow and running an Baseline Simulation and to make an parametric study with enhanced Reynolds Number. Theory. Computational fluid dynamics (CFD) is a branch of fluid…

Q1. Download following cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties. process: • Create two points one as entry and another as exit point. • create planes at two points and another at base. • Switch to Electric part desgn •…

Aim: 1) To Route the following harness layout in the Electrical workbench. 2) Add protective covering on all branches connected to DT06-2S & DT06-4S connectors. Given: CAD data of the following Connectors: • DT06-4S • DT06-6S • DT06-2S • DT06-08SA Connectors Layout Design: Steps to be followed:…

AIM- Route two electrical harnesses as per the given layout and interconnect them as a single harness assembly and then check for bundle continuity, bundle warnings, and then give annotations to the final harness assembly. OBJECTIVE 1. The objective of this project is to first route the two Harness A and Harness B as per…

Aim - Make a case study and understand that, how different angle of attacks affects the drag force and lift. Objective - Our objective here is to Modle an Airfoil and vary the angle of attacks from 0 to 10 with the difference of 2 units, and compare the Drag Force (Df) and Lift.  Geometry - Steps - • Insert the…

Objective: The objective of this project is to create the routing for the given Engine and prepare to flatten the view drawing in CATIA V the mechanical part as an electrical connector and apply the electrical properties to the Connectors. Procedure: Procedure for Connector Definition: • Initially, the mechanical…

AIM: To flatten the wire harness assembly completed in week 4 assignment and place the flattened view on a drawing sheet. OBJECTIVE: To flatten the wire harness assembly completed in week 4 assignment.      • To orient the wire bundle as shown in the layout. To place the flattened view on a drawing…

AIM: The purpose of this analysis is to create a 3D model of a bench flow and find out the pressure loss and mass flow rate in intake port of cylinder head of IC engine for different valve lift using solidworks flow simulation. INTRODUCTION: Computational fluid dynamics (CFD) is a branch of fluid mechanics that uses numerical…

Aim:- To perform flow simulation of centrifugal pump using air as a flow medium Theory: Centrifugal Pump: Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor. They…

1. Objective: 1.1 To Create 3D models for driver and driven wheels. 1.2 Perform motion analysis by rotating the driver wheel at 10rpm. 1.3 Obtain the following plots: - Contact force (between driving and the driven wheel) as a function of time. - Angular Displacement of the driven wheel. 1.4 Compare the contact forces…

                                                                       PLANETRY GEAR ASSEMBLY INTRODUCTION : A  planetary gear systems,…

MBD Simulation on a Piston Assembly AIM:- Create the parts and assembly of the piston and motion analysis of piston assembly. OBJECTIVES To create the 3d model of the parts and assemble the parts to make a mechanism. To motion analysis of the piston assembly. To plot the Linear Displacement of the piston head. To plot…

Abstract In this project, the main objective is to model an IC engine valve train which consists of essential parts such as a cam, push rod, rocker arm, valve mount, and valve, then assemble them in SolidWorks. Then run the motion analysis to find the contact force encountered between the parts(between cam and…

MBD I. Radial EngineThe Radial Engine is a reciprocating type internal combustionengine configuration in which the cylinders point outward froma central crankshaft like the spokes on a wheel.This type of engine was commonly used in most of the aircraftsbefore they started using turbine engines.In a Radial Engine, the pistons…