Aim: Analysis of a practical automotive wiring circuit Objective: To identify each of the major elements in the above automotive wiring diagram.  Explain the purpose and working of any three elements briefly. To determine fuse rating. To determine the voltage and capacity of the battery. To identify any two elements which…

Aim: Data Handling and Interpolation Objective: To read the excel file in the Matlab program. To perform the interpolation in the range of -17.3:0.1:0.9. To generate the interactive plot for the interpolated data. To store them in a text file. Solution:   file=xlsread("VI.xlsx");%reading the data from…

Aim: To develop a Simulink model for the DC motor using the Proportional, Integral, and Derivative (PID) control to design, develop and test a controller to maintain a desired speed for the motor. Objective: Mathematical modeling from the first principles Modeling an Electrical Engineering system Simulink based…

Aim: Develop a double-acting actuator model using Simscape Multibody and Simscape components. The mechanical system of the cylinder needs to be built using Simscape Multibody library components/blocks, and the hydraulic system needs to be modeled using Simscape library physical components. Objective: The mechanical…

Aim: To develop a forward energy-based fuel consumption model of a conventional vehicle. Objective:  Build a Simulink model using blocks and complete the vehicle model. Writing scripts in MATLAB to load all the variables required for running the Simulink model. Tabulate the fuel economy numbers (kmpl) for UDDS…

Aim: To develop a forward energy-based fuel consumption model of a P1 hybrid vehicle.  Objective:  Build a Simulink model using blocks and complete the vehicle model. Writing scripts in MATLAB to load all the variables required for running the Simulink model. Tabulate the fuel economy numbers (kmpl) for…

1. Table consists of materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP, and LTO type of lithium-ion cells. Li-ion Batteries: A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric…

Aim: To estimate the state of charge. Objective: To simulate the 3 test cases from the harness dashboard and to write a detailed report on the results. What is coulomb counting? Refer to the above model and explain how BMS implements coulomb counting for SOC estimation.  Solution: Case study 1:-Simulate the 3 test cases…

Aim: To develop a battery pack of 18KW using ANR26650M1-B cells along with the mechanical design. Objective: Data collection from the Nanophosphate High Power Lithium-Ion Cell PDF for Cell: ANR26650M1-B. Performing a complete electrical analysis on an 18 kWh battery pack. Calculating the battery pack's physical size. Take…

Aim: Thermal modeling of the battery pack Objective: To develop a model for a 10-cell series lithium-ion battery. To simulate the thermal effects of the battery. To compare life cycle performance at various temperatures, charge & discharge rates using MATLAB. Solution: A lithium-ion (Li-ion) battery is an advanced battery…

Aim: Define the given connectors & connector clip as Electrical Connectors and add all the necessary properties using the Electrical Part design workbench in CATIA V5. Objective: The goal of this project is to download the provided files from TE.com, define them as electrical connectors or equipment, and then add the necessary…

Aim: Define Clamps, backshells, and corrugated tubes with all their necessary electrical properties using Electric Part Design Workbench in CATIA V5. Objective:  Download required clip cad data & define it as Electrical support using an Electrical Part Design Workbench. Define all the necessary properties. Steps: Download…

Aim: Routing of Harness layout in CATIA V5 Electrical workbench. Objective:  The objective of this project is to route the harness layout in the electrical workbench. The above figure shows the length of each wire branch and the connectors associated with them. The following Deutsch connectors are used in this harness:-…

Aim: Two electrical harnesses are routed according to the configuration provided and connected as one harness assembly. The finished harness assembly is then annotated after being checked for bundle continuity and bundle warnings. Objective:  The objective of this project is to first route the two Harness A and Harness…

Aim: To prepare a flattened view of a previously created harness assembly. Objective: This project's goal is to flatten a harness assembly's view and then insert it on the drawing sheet. On the drawing page, several images should be used to depict the bundles with protective coverings. Any wiring harness should be flattened…