AIM : To calculate the concrete mix design for M35 grade concrete with fly ash EQUATIONS: Target mean strength:f'ck=fck+1.65 s                                         f'ck= target mean strength                                         fck=compressive strength at 28 days of concrete                                      …

AIM: Sketch a G+1 floor residential plan, according to vastu shasyra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (column,beam, slab, etc) and accordingly calculate the individual corresponding loads from the…

AIM THIS DRAWING USED TO AUTO CAD SOFTWARE P-1 p-2 P-4 P-5   P-7   P-8   P-9 P-10                  

 Creating a floor plan, Footing detail and Isometric view using Autocad 1) AIM : To draw cross section of wall over footing. COMMAND USED :  Line Rectangle  Trim PROCEDURE : STEP:1 Create a rectangle by typing "REC" in command box. Specify the first corner point as (5,5) Specify the length of rectangle 0.9…

DRAWING : 1 AIM : To draw the given sketch in autocad  INTRODUCTION : Autocad offers various tools like rotate, chamfer, fillet, offset etc to ease the sketching procedure. PROCEDURE :  1. Open new file and set decimal and precision to 0.0 2. command line. from randam point draw 3.00 m line and @ 2.12<45…

1) AIM : To sketch the layout of a residence as shown in the below fig. considering all dimensions as reference to sketch the unit plan. also the text in the layout are only for reference. assuming the missing dimensions. also, refering the schedule for size of the doors. COMMANDS USED : 1.Units 2.Rectangle 3.Offset 4.Explode…

1) AIM: HINT : Use front name: romans,shx; Height: 8" justify: left PROCEDURE:     make table by using line command  choose a line from toolbar draw a horizontal line of 30m distance from left side to right  draw a verticle line of 10m distance from bottom to top  and then take offset of 5m…

1) AIM : To draw the elevation and details of a wordrobe as shown in given fig. PROCEDURE: Set a dimensions of units. Limits entry  zoom entry  In the command line type entry. Draw a rectangular block entry  dimensions are entry And then draw the plan ENTRY TO XL LINE TO PROJECTION  Then after enter…

 AIM :  CREATE THE PLAN AND SECTIONS AS SHOWN IN THE FIG. PROCEDURE: LIMITS ENTER DIMENSIONS ENTER XL COMMAND ENTER LINE ENTER Q LEADER ENTER TEXT  ENTER THE XL COMMAND AND PROJECTION TO THE VERTICAL AND HORIZONTAL LINE DIRECTION  ENTER THE OFFECET COMMAND AND TO PROVIDE TO THE OFFSET 230 MM AND DRAW…

8)  AIM:  To design and draft a layout of a residential building with plat size (60' -20') COMMANDS USED: XL TRIM EXTENSION  ADC (DESIGN CENTRE) LINE  RECTANGLE LT (LINETYPE) ARC PROCEDURE: In the command prompt type units > ft In the command prompt type limmax > 100',100' In the command prompt…

1) AIM: To create custom1 title block and custom 2 title block using attributes and block command from Autocad software. PROCEDURE: STEP 1 (CUSTOM 1-TITLE BLOCK) In the command prompt typel to draw the lines. In the ribbon tab annotate > mt line (to craft the text) Go to properties tab to change the colour In the ribbon…

  1) AIM:  To create the kitchen layout and to also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required. PROCEDURE: Units are set to MM  Limits and limax are also set  Zoom command is also used STEPS FOR DRAWING BELOW COUNTER PLAN: Open Autocad and enter…

1) AIM: To create the layout of the plan and section A of the project in challenge 7 as shown in the figure. above in autocad. INTRODUCTION: The layout is created in autocad by using the template tutorial-M arch. dwt in a scale as given in the figure. the procedure is explained in detail with diagrams of each step and…

1) AIM:  To create a 3d furniture element as given in the figure. and need to assume dimensions which are missing in the drawing.  INTRODUCTION: There are dimensional furniture element was drawn in the autocad using the different tools in the autocad. 3d models are widely used anywhere in 3d graphics and autocad.…

 1) AIM: To create a 3d isometric view of the given building with plan and elevation. INTRODUCTION: Am isometric drawing is a 3d representation of an object, room, building or design on a 2D surface. One of the the defininng characteristics of an isometric drawing, compared to other types of 3D representation, is…

 CREATING A 3D RENDERED MODEL FOR A RESIDENTIAL BUILDING IN AUTOCAD. AIM: TO create a 3 dimensional model of the residential building with a rendered view in AUTOCAD. INTRODUCTION: Rendering is a process of creating a raster image based on 3D objects in a scene. A renderer is used to calculate the appearanceof the…

 1) INTRODUCTION TO REVIT CONCEPTS. AIM: To create a new project from the file menu and need to name the project appropriately. INTRODUCTION: For creating a project, select a template from the projects list (or) the new project dialog box. To configure the project, choose manage project information and enter information…

1) BIM: Revit building elements are of three types. View elements. Model elements. Annotate elements.          Annotation elements.           Datum elements. BIM stands for for building information modeling. BIM is a process supported by various tools,technologies,…

 1) AIM:     Using the floor tool under the architecture tab and select the floor with approprite material and thickness using the property browser PROCEDURE: From the model we created in week 2, a flooring isto be created. for which the required flooring is selected from the library as shown below…

1) AIM: To model a ceiling to the previously created project with the help of an architectural tab above the walls at the first-floor level. TOOLS USED: Architecture tab Ceiling  Sketch ceiling  Pick lines  Properties. PROCEDURE: In the project file saved for week 3, click on the ceiling tool in the architecture…

Your Answers 1) ANS:  My model represents a multi-unit residential apartment. 2) ANS:  My Assumed location details are RR- Group Construction Company, Kowdipally, Medak, Telangana.-502316.  My Modeling Gives The Model Requirements From NBC. 3) ANS: AIM:: To create a foundation, columns, beams connected to…

ANSWERS:- 1)     2)     3)     4)         5)      

1)  AIM:- To create a set of sinusoidal points, create a curve, and create a surface out of the curve. INTRODUCTION:- Dynamo is a visual programming tool that works with Revit. Dynamo extends the power of Revit by providing access to the Revit API( Application programming interface) in a more accessible…