Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

CREATING A 3D RENDERED MODEL FOR A RESIDENTIAL BUILDING IN AUTOCAD.

AIM:

TO create a 3 dimensional model of the residential building with a rendered view in AUTOCAD.

INTRODUCTION:

Rendering is a process of creating a raster image based on 3D objects in a scene. A renderer is used to calculate the appearanceof the material attached to the object in a scene,and how lighting and shadows are calculated based on the lights placed in a scene.

Environmental and exposure settings can be adjusted to control the final rendered image. the basic rendering workflow is to attach materials to 3D object of a model, place user defined lights, add a background and start the rendered with the render command.

Lights and materials can be added to a 3D model before a photorealisitic image is rendered.

Reendering quality can be changed by using the cameras, sunlight different types oflights like point light, spot light, distant light etc. using these commands properly can improve the rendering to agreat extent.

PROCEDURE:

• Open the autocad and go to 3D modelling
• Initially set the units of the drawing as decimal.(mm).
• Now, set the limits of the drawing.
• Now create a 2D plan for a residential building with the help of commands like line, offset, trim etc.
• now, create the elevation of the same by using lines,, offset, trim, and other necessary tools in autocad.
• Now, we have to creat the 3D model of the same.
• For this move to 3D modelling workspace in the settings.
• Now, copy the plan separately.

• then create different necessary layers like 3D walls ,3D windows etc.
• Now, copy the first floor plan and create the boundary region.
• Then extrude the 3D wall leaving the space for the windows.
• Now, create the floor for ground floor by drawing a rectangle and then create a region and extrude it downwards at depth of 4''
• Now, create the window sand doors.
• For that go to elevation and copy the entire elevation beside it.
• then in the copied elevation retain the doors and windows.
• then change the layers to window frame and create a boundary region for the window frame.
• then substract the inner portion of the window.
• Hence, window is created. similarly , create the other windows.
• Hence, window is created. similarly, create the other windows.
• hence, windows and doors of the groung floor has been created.
• Similarly, windows and doors of the forst floor is also created which given below.

• Now,we have to create the floor for the first floor i.e. the roof for the ground floor.
• For this go to the plan and choose the 3D floor layer and create a rectangle as per the inner dimension of the wall.
• Then cut the portion where there is staircase.
• then the remaining portion is converted to region and is extruded.
• This is then placed over the ground floor developed.
• Now, place the first floor above this.
• Now,place the roof above the first floor.
• This is done in the same way as the one created for ground floor from the plan.
• This is also created from the plan.
• The next steps is to apply materials. this is done through material browser in the visualise panel of the ribbon.

• The next step is to do the rendering, for this we have to position the camera so that better view is obtained and the view is named as camera 1 and make it as realistic view.
• After this,rendering process begins.
• The rendered image is obtained as given fig.

RESULT:

The 3D rendered image of a five storey building as per theplan and elevation created is also.