Menu

Workshops

Projects

Blogs

Careers

Find Jobs


For Business / Universities

Corporate Training

Hire from US

Academic Up-skilling


All Courses

Choose a category

Loading...

All Courses

All Courses

logo

Loading...

FOR BUSINESSES

Corporate Upskilling

Hire from Us

FOR Universities

Academic Training

More

Mohit Takhalate

Build yours own dreams into reality

Introduction

Keen learner, able to work individually as well as in a team, easy to mould in any environment, concrete believe in hard work, focus to complete work with planning accuracy and efficiency fulfilling obligations, positive attitude, willingness to take on responsibilities and challenge and have skills to motivate and directing people as they work.

36 Projects

Project on Concrete Mix Design for various grades of Concrete

Objective:

   AIM: Calculate the concrete mix design for M50 grade concrete without Fly ash. Test Data for Materials The following data are collected by performing standard tests in a laboratory. Specific gravity of cement : 3.12 Specific gravity of Coarse Aggregate : 2.74 Specific gravity of Fine Aggregate :…

calendar

07 Jun 2021 05:44 PM IST

    Read more

    Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code

    Objective:

    AIM - To Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings.   PROCEDURE -     Vastu Shastra Principle:- The main door is faced towards the east which gives archway to victory and progress in life”. The living room is placed in…

    calendar

    23 Jun 2021 06:49 AM IST

      Read more

      Creation of geometries by Coordinate system methods using AutoCad

      Objective:

      AIM: To create the geometries from P1 to P2 using all the coordinates system methods, to use the Line tool and circle to create the geometries.   PROCEDURE To Draw Line simple lines or series of lines segments by one way of the following: Command Line: Line or L Menu Bar: Draw- Line Draw Bar Tool palettes: Draw- Line…

      calendar

      28 Jun 2021 03:00 PM IST

        Read more

        Creating a Floor plan, Footing detail and Isometric view using AutoCad

        Objective:

        AIM - Creating a Floor plan, Footing detail and Isometric view using AutoCad.   Q1.   Procedure -  Type Rec or Rectangle in the command line and press Enter. Specify the first corner of the rectangle. Enter D for Dimensions. Enter the length: .90 Enter the width: .25 Specify the other corner. Type L in the command line…

        calendar

        05 Jul 2021 09:23 AM IST

          Read more

          Drafting of various geometries using Chamfer, Fillet tool in AutoCad

          Objective:

          AIM - Drafting of various geometries using Chamfer, Fillet tool in AutoCad.   Q1.  Procedure -  Type L in the command line and press Enter. Specify the start point: 1,1 Specify next point: @3, 0 Specify next point:@2.12<45 Specify next point:@2.83<135 Specify next point:@-2,0…

          calendar

          11 Jul 2021 10:02 AM IST

            Read more

            Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad

            Objective:

            Q1. AIM - Residence Plan: Sketch the layout of a residence as shown in the Figure Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors. Procedure -  Type UN and press enter Under Drawing…

            calendar

            18 Jul 2021 08:35 PM IST

              Read more

              Creation of Column Schedule and Drawing Template using AutoCad

              Objective:

              Q1. AIM - Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left Procedure -  To draw the columns Type Rec or Rectangle in the command line and…

              calendar

              25 Jul 2021 06:14 PM IST

                Read more

                Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad

                Objective:

                AIM - Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad. Q1. Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document…

                calendar

                02 Aug 2021 06:12 AM IST

                  Read more

                  Creating a Layout, Section and Elevation with dimensions using AutoCad

                  Objective:

                  AIM - Creating a Layout, Section and Elevation with dimensions using AutoCad   Q1. Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details…

                  calendar

                  03 Aug 2021 05:59 PM IST

                    Read more

                    Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings

                    Objective:

                    AIM - Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East  c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Beam, Footing Plan)  …

                    calendar

                    08 Aug 2021 04:04 PM IST

                      Read more

                      Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

                      Objective:

                      AIM - Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad.   Challenge 1 - Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes…

                      calendar

                      13 Aug 2021 05:17 PM IST

                      • DESIGN
                      Read more

                      Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

                      Objective:

                      AIM - Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad   Challenge 1 -  Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances…

                      calendar

                      16 Aug 2021 05:34 PM IST

                        Read more

                        Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad

                        Objective:

                        AIM - Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad   Challenge 1 - Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the…

                        calendar

                        19 Aug 2021 07:47 AM IST

                          Read more

                          Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad

                          Objective:

                          AIM - Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad.   1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. Procedure -  Type UN and press enter Under Drawing Units, select Archetectural (feet and inches) Now the lower…

                          calendar

                          19 Aug 2021 01:45 PM IST

                            Read more

                            Creating 3D Isometric view of various structural elements in AutoCAD

                            Objective:

                            AIM - Creating 3D Isometric view of various structural elements in AutoCAD.   1. Create a 3D Isometric View of the building with plan and elevation given. Procedure -  Under Drawing Units, select Archetectural (feet and inches) Now the lower limit is set to 0', 0' and upper limit to 50', 50' Type Z enter to zoom and A enter…

                            calendar

                            23 Aug 2021 04:16 AM IST

                              Read more

                              Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

                              Objective:

                              AIM - Creating a 3D rendered model for a Residential Building in AutoCad   Procedure -  Step 1: Draw the plan using AutoCAD 2D   Under Drawing Units, select Architectural (feet and inches) The lower limit is now set to 0 ', 0' and the upper limit to 100 ', 100' Type Z enter to zoom in and A enter them…

                              calendar

                              26 Aug 2021 05:55 AM IST

                                Read more

                                Introduction to REVIT concepts

                                Objective:

                                AIM - Introduction to REVIT concepts.   1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately. Ans .  Open the Revit app using the desktop short cut. Under the project section click new and select the construction…

                                calendar

                                31 Aug 2021 07:31 AM IST

                                Read more

                                Creating Levels, Grids, Layout and model elements for a residential unit using REVIT

                                Objective:

                                AIM - Creating Levels, Grids, Layout and model elements for a residential unit using REVIT   Q1. What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. Ans. Building Information Modelling (BIM) is an intelligent 3D model-based process that equips architecture,…

                                calendar

                                10 Sep 2021 04:09 PM IST

                                Read more

                                Creating Walls, Partition walls and Floors for a residential layout using REVIT

                                Objective:

                                AIM - Creating Walls, Partition walls and Floors for a residential layout using REVIT.   Q1. Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property…

                                calendar

                                14 Sep 2021 03:02 PM IST

                                Read more

                                3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

                                Objective:

                                AIM - 3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT.   Q1.  Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at…

                                calendar

                                15 Oct 2021 10:58 AM IST

                                Read more

                                Introduction to National Building Code and Steps in a Construction project

                                Objective:

                                Q1. Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit? Ans.  Building codes or standards  is widely reffered and used by state/local bodies regulating development and building construction activities, Govenment construction departments and agencies, private constructio…

                                calendar

                                17 Oct 2021 06:33 AM IST

                                Read more

                                Usage of Collaborate tool in REVIT

                                Objective:

                                Q1. Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project ? Ans.  Procedure -  Click on the New options in the Models section and select the Structural template from the new project dialogue box and click OK. Type VG to open the Visibility option settings.…

                                calendar

                                18 Oct 2021 09:17 AM IST

                                  Read more

                                  Creating Architectural and Structural model with 3D rendering using REVIT

                                  Objective:

                                  Q1. Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School Ans. I choose Multi-Unit Residential Apartment   Q2. Assume reasonable assumptions…

                                  calendar

                                  02 Dec 2021 04:19 PM IST

                                  Read more

                                  Structural analysis of a buidling using Robot Structural Analysis

                                  Objective:

                                  Q1. What are HVAC systems? Why are they essential in the modeling of buildings ? Ans. HVAC system is one of the important component in the modeling of a building. The term HVAC stands for Heating, Ventilation and Air conditioning. Now lets get into these terms, Heating means to increase the temperature of the input…

                                  calendar

                                  14 Dec 2021 04:07 PM IST

                                  Read more

                                  Preparing Schedule & Cost Estimation for a building using REVIT

                                  Objective:

                                  Q1. Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below           a. Using 3D model create a section box           b. To create similar doors and windows in a floor plan layout           c. To reduce the thickness of lines visible in plan views           d. To apply override…

                                  calendar

                                  15 Dec 2021 04:43 AM IST

                                    Read more

                                    Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

                                    Objective:

                                    Q1. Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve? Ans. AIM - create a set of sinusoidal points and create a curve and create a surface out of the curve   Procedure -  1. Open new revit file and open a architectural template. 2. click on manage tab…

                                    calendar

                                    16 Dec 2021 05:24 AM IST

                                      Read more

                                      Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork

                                      Objective:

                                      Q1. Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class? Ans.  AIM - Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the…

                                      calendar

                                      19 Dec 2021 02:11 PM IST

                                        Read more

                                        Identification of Cracks

                                        Objective:

                                        Q1 . What is the mode of failure or damage of the beams in the figure above? Are the damages repairable? Elaborate Ans. (A) Type: Damage   Cause: Flexural cracks developed at bottom of beam   Explanation:  Damage have occurred at the beam column joint The beam have undergone severe damage as compared…

                                        calendar

                                        21 Dec 2021 09:34 AM IST

                                          Read more

                                          Calculation of Stiffness in Structural elements

                                          Objective:

                                          Q1. Compute lateral stiffness of the one story frame with an intermediate realistic stiffness of the beam. The system has 3 DOFs as shown. Assume L = 2h and Elb = Elc   Ans. The system has the three DOFs shown in Figure. To obtain the first column of the 3x3 stiff ness matrix. we impose unit displacement…

                                          calendar

                                          21 Dec 2021 04:52 PM IST

                                            Read more

                                            Understanding the concepts on Degrees of Freedom

                                            Objective:

                                            Question 1: A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived. The fundamental period of vibration (T1 = 2 seconds) and its associated mode shape: The…

                                            calendar

                                            22 Dec 2021 07:49 AM IST

                                              Read more

                                              Concept on positioning of Columns

                                              Objective:

                                              Q1. Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility. Ans.  SYMMETRY   The framing layout is symmetric in nature The load resistance…

                                              calendar

                                              22 Dec 2021 09:26 AM IST

                                                Read more

                                                Conceptual design of a building with columns and shear walls

                                                Objective:

                                                Q1. The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements, (a), (b), (c), all with the same total cross-sectional area of the shear walls. Compare the three alternatives, taking into account the restraint…

                                                calendar

                                                23 Dec 2021 08:35 AM IST

                                                  Read more

                                                  Modelling of 25 storey building with the specified properties using ETABS

                                                  Objective:

                                                  Challenge 6 – ETABS modelling of a 25 storey building AIM -  Model a 25 storey building on ETABS with structural properties as specified below. Ground floor or plinth floor level can be taken at a height of 1.5 metres from the base. Each of the successive 25 storeys has a storey height of 3 metres. Structural…

                                                  calendar

                                                  23 Mar 2022 06:31 AM IST

                                                  Read more

                                                  Project 1_Comparative study of different storey buildings for Seismic forces

                                                  Objective:

                                                  calendar

                                                  24 Mar 2022 02:45 PM IST

                                                    Read more

                                                    Reinforcement Detailing of Beams from ETABS output

                                                    Objective:

                                                    Challenge 7 – Detailed design of concrete buildings -1 AIM - Detail design of beams in Etabs 2018.The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment Resisting Frame. The following challenge deals specifically with two continuous beams in the 1st floor.        …

                                                    calendar

                                                    30 Mar 2022 09:31 AM IST

                                                    Read more

                                                    Reinforcement detailing of Columns from ETABS output

                                                    Objective:

                                                    AIM - Reinforcement detailing of columns in Etabs 2018. The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment Resisting Frame. The following challenge deals specifically with two columns at the following grid intersections. 3A 3B Provide details of longitudinal reinforcement for…

                                                    calendar

                                                    01 Apr 2022 07:33 AM IST

                                                    Read more
                                                    Showing 1 of 36 projects

                                                    3 Course Certificates

                                                    certificate

                                                    Civil Engineering Fundamentals Module

                                                    CertificateIcon
                                                    Certificate UID: dvpnqh593tybw0ci
                                                    View Certificate
                                                    certificate

                                                    AutoCAD Essentials for Civil Engineers

                                                    CertificateIcon
                                                    Certificate UID: c8fonwh7um1y9l5q
                                                    View Certificate
                                                    certificate

                                                    Drafting and Design Using Revit

                                                    CertificateIcon
                                                    Certificate UID: 92fu46zblnx0ihym
                                                    View Certificate
                                                    Showing 1 of 3 certificates

                                                    4 Workshop Certificates

                                                    certificate

                                                    Fundamentals of Structural Engineering

                                                    CertificateIcon
                                                    Certificate UID: s7ca3vezld
                                                    View Certificate
                                                    certificate

                                                    Reinforced concrete and Application of STAAD in Concrete Design

                                                    CertificateIcon
                                                    Certificate UID: wn0srmfgv4
                                                    View Certificate
                                                    certificate

                                                    Shallow Foundation Design

                                                    CertificateIcon
                                                    Certificate UID: wuxzjqplgk
                                                    View Certificate
                                                    certificate

                                                    Project Schedule management

                                                    CertificateIcon
                                                    Certificate UID: wy215uqsex
                                                    View Certificate
                                                    Showing 1 of 4 certificates

                                                    Academic Qualification

                                                    M.Tech

                                                    NITTTR

                                                    20 May 2015 - 11 Jan 2018

                                                    B.E

                                                    Vindhya Institute of Technology and Science

                                                    01 May 2009 - 18 May 2013

                                                    12th

                                                    Guru Gobind Singh Khalsa Higher Secondary School

                                                    01 Mar 2008 - 01 Apr 2009

                                                    10th

                                                    Guru Gobind Singh Khalsa Higher Secondary School

                                                    01 Mar 2006 - 01 Apr 2007

                                                    Schedule a counselling session

                                                    Firstname is required
                                                    Lastname is required
                                                    Please enter a valid email
                                                    Please enter a valid number

                                                    Here are the courses that I have enrolled

                                                    coursecard
                                                    4.8

                                                    11 Hours of Content

                                                    coursecard
                                                    4.8

                                                    31 Hours of Content

                                                    coursecard
                                                    Recently launched

                                                    0 Hours of Content

                                                    coursecard
                                                    Recently launched

                                                    18 Hours of Content

                                                    coursecard
                                                    Recently launched

                                                    21 Hours of Content

                                                    coursecard
                                                    Recently launched

                                                    10 Hours of Content

                                                    Similar Profiles

                                                    Dileep kumar  kurmapu
                                                    Dileep kumar kurmapu

                                                    consistency is the key

                                                    sohan G Naik
                                                    sohan G Naik

                                                    God is Great!

                                                    Kundeti Ganesh
                                                    Kundeti Ganesh

                                                    just do it

                                                    SANJO SEBASTIAN
                                                    SANJO SEBASTIAN

                                                    Choosing the best skills from the rest

                                                    Amol Ramesh Pavitre
                                                    Amol Ramesh Pavitre

                                                    Electrical Engineer

                                                    Try our top engineering courses, projects & workshops today!Book a FREE Demo