AIM:    To Make a Simulink model of Doorbell using solenoid block.            To Use a thermistor to sense the temperature of a heater & turn on or turn off the fan. SIMULATION MODEL OF DOOR BELL USING SOLENOID BLOCK          …

1.AIM: To Implement control logic of a washing machine using State flow as per given sequence  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by washing time of 100s. Then rinsing…

AIM: To Study the Simulation of BAJA All-Terrain Vehicle (AVT) Model. OBJECTIVES: To study the AVT model with & without dashboard To study the AVT model using lookup table with and without dashboard INTRODUCTION: ALL-TERRAIN VEHICLE (AVT) An all-terrain vehicle (ATV), also known as a light utility vehicle…

AIM: To Use ADVISOR tool and simulate the  EV defaults in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle. Try changing the battery capacity. Perform Gradeability test with PRIUS Jpn defaults in file.   ADVISOR: ADVANCE VEHICLE SIMULATOR tool…

1.Difference between mapped and dynamic model of engine, motor and generator MAPPING MODEL: The Mapping model is a 2-Dimensional Lookup Table where all the data like motor parameters values (motor rpm, starting torque and efficiency), generator parameter values (current, voltage) engine values are enter from the typical…

Types of power converter circuits are employed in electric and hybrid electric vehicle POWER ELECTRONICS Power Electronics belongs to partly Power Engineers and partly Electronics Engineers. The Power Engineering is mainly deals with the Generation, Transmission, Distribution and Utilization of power and Electronics Engineering…

AIM: To Control the Speed of a DC motor using BJT H-bridge. Choppers The chopper is a static device that converts fixed DC voltage to an adjustable (Variable) dc output voltage directly.                  Figure 1 &2 represents the chopper circuit diagram and  chopper…

1.For a defined driving cycle, calculate the energy required for braking. Driving Cycle: Driving Cycle is nothing but the Speed versus Time data curve. Transient driving cycles involve many changes, representing the constant speed changes typical of on-road driving. Modal driving cycles involve protracted periods at constant…

Electric Vehicle An electric vehicle (EV) is a vehicle that uses one or more electric motor propulsion. It can be powered by a collector system, with electricity from extravehicular sources, or it can be powered autonomously by a battery. Electric Vehicles first came into existence in the mid-19th century,…

AIM: To Development the MATLAB Model of Vehicle Direction Determination and to create the Data Dictionary creation & code generation. Concept of ADAS Advanced Driver Assistant System (ADAS) are electronic systems that help the vehicle driver while driving or during parking. Through a safe human-machine interface, ADAS…

AIM: To develop one specific requirement of Traffic Jam Assistant algorithm which is feature in the IPC algorithm. Objectives:   This model must be developed in MATLAB Simulink as per MBD guidelines. Code Generation Profile must be in Embedded Coder. Simulink Data Dictionary must be created for the model &…

AIM: To Develop the Highway Assistant Lane Changing Assistant using MATLAB/SIMULINK Software. Objectives: This model must be developed in MATLAB Simulink per MBD guidelines. Code Generation Profile must be Autosar Coder. Simulink Data Dictionary must be created for the model & must be linked to the model. All the input…

1. Lithium Ion A lithium-ion battery or Li-ion battery is a type of rechargeable battery   composed of cells in which lithium ions move from the negative electrode through an electrolyte to the positive electrode during discharge and back when charging. Li-ion cells use an intercalated…