PROJECT -MODELLING OF AMERICAN CHOPPER       OBJECTIVES-The main objectives of this project are in the solidworks first of all sketching of different part of american…

SUNNY_RADARMAST   RADARMAST FEATURE TREE-       TOP VIEW OF RADARMAST-         ISOMETRIC VIEW OF RADARMAST-     FRONT VIEW OF RADARMAST-     LEFT SIDE VIEW OF RADARMA      SUNNY_YACHT ASSEMBLY   TITLE OF PROJECT-MODELLING & ASSEMBLY OF…

BENCHMARKING- benchmarking is the process of comparing various in during process with the other industry best process and getting the output in benchmarking we compare a process or a product from different industries of that domain usually comparision is done with the companies that are best in the domain .bench marking…

                                                 UNDERBODY COATING INTRODUCTION -Modern day cars are made of various materials combined but the main chassis of the car body is made of carbon steel or aluminium alloys to reduce weight while also giving the required strength to the body. but even after many layers of an…

                                                             HOOD DESIGN Hood or bonnet is the hinged cover over the engine of motor vehicle .hoods can open to allow…

                                   SECTION MODULUS CALCULATION AND OPTIMIZATION   AIM-use the section from hood design and calculate the section modulus using the formula  S=I/Y , S=section modulus,I=moment of inertia…

   FENDER DESIGN -WHEEL ARCH CALCULATION: OBJECTIVE-calculate the wheel arch area of european standard and prove wheather the car will pass the standards or not.   INTRODUCTION:-The wheel arch is an arch -shaped cavity in the body of a vehicle,which houses a wheel.it has two important functions .it seves…

                                                    FENDER OBJECTIVES- To design the car front fender with the help of using skin data (class A surface) shared by the styling team and make it…

                                                  REPORT OF ROOF DESIGN AIM- To develop the essential flanges and reinforcements with appropriate dimensions and checking draft by performing…

                                                               BACKDOOR DESIGN   Objective: Use the provided styling surface to come up with a back door design,…

                                                        BASE BRACKET BY USING OF CLASS A SURFACE   AIM: Create the Base Bracket Plastic component through the given Class-A…

                                                           Title:    Switch Bezel Design      DESIGN AND DRAFT ANALYSIS OF SWITCH BEZEL …

                                                                  COIN HOLDER OBJECTIVE: Developing the coin holder plastic model design from the give input class A surface by ceating class B and class C surface.   AIM Create the Coin Holder Plastic component through the given Class-A surface.the tooling axis for the given…

                                                                     BUMPER AIM  Create the Bumper Plastic component through the given Class-A…

                                                                  RIBS AND SCREW   AIM Create the component through the given Class-A surface. …

                                                            DOG HOUSE Attachment Feature Creation - Challenge 2   AIM Create the Dog House for the Door Trim considering…

                                                         DOOR TRIM LOWER DOOR TRIM LOWER Aim: To Create the Door trim lower component through the given Class-A surface. Objectives:…

AIM Create the Dog House for the Door Trim considering the design rules INTRODUCTION DOG HOUSE Dog house is an engineering feature used in plastic design. Dog houses are used as support feature. Sometimes other engineering features like snaps, locators, and screw bosses are mounted on them to increase their strength. Dog…

OBJECTIVE Create the Door Trim Assembly from the given A Surface. Refer to the Master section for Nominal thickness, Flanges, and Heatstakes. Assemble the respective components into one single Product: Straight Arm Rest Inclined Arm Rest Upper Map Lower Map Pocket Lower Substrate     PROCEDURE STEP 1: ASSIGNING…

this is feature tree of this component firstly create a point then after create axis by the help of axis analysie command  then after after that cavity is create by use of cavity connector command     feature tree   firstly create a point and create axis by the help of axis analysis command  connector…

1  IN A P CLAM FIRST WE DOWNLAOD AFTER THAT GO TO THE ELECTRIC PART WORK BENCH AND CREATE TWO POINT AT EXITS AND ENTRY AFTER THAT CREAT A PLAN AT ENTRY AND EXITS POINT . AND CREATE A PLANE AT HORIZENTAL.AND DEFINE THE ENTRY AND EXIXT POINT WITH THE HELP OF ELECTRICAL PART DESIGN.   DIFFERENT TYPE OF VIEW  …

in this challange we have define all component like bundle connection and connector connection point by creating point and axis by axix system. sfter define each component after that we create a sketch in part workbench . and in the electric  harness we have assemble them as per challange and provide protective covering…

AFTER DEFINING ALL PART IN THIS CHALLANGE FIRST WE CONNECT ALL 1,2,3,4,5 ALL FIVE PART THROUGH A SKETCH BY USING SNAP TOOL AND MANIPULATION.FINALLY CREATE HARNESS B  FEATURE TREE OF HARNESS B         TOP & ISOMETRIC VIEW               SAME LIKE HARNESS B WE DO SAME PROCESS FEATURE TREE OF HARNESS A   FRONT &  ISOMETRIC…

IN THIS CHALLANGE WE HAVE TO USE FLATTEN COMMAND FOR FLATTENING AND ALSO PROVIDE PROTECTING COVER WITH THE HELP OF COT 15MM  FEATURE TREE TOP & ISO VIEW                             DRAWING                                                                                                                  

                                       WIRE HARNESS IN BACK DOOR CAR  CAR BACK DOOR WIRING HARNESS DESIGN- PROJECT 2 AIM To route the Wiring harness on given car body back door and prepare flatten view drawing in CATIA V5. INTRODUCTION A wire harness, also commonly referred to as a wiring harness, is an exterior sheath…

                                                              ENGINE HARNESS  https://drive.google.com/file/d/176J_HFrsD4HK05voe5CXaVNsXd1RFSO0/view?usp=sharing…

                                          answer