Aim:- Concrete mix design for M35 grade concrete with fly ash to reduce the cement usage and to make the concrete more environment friendly- Procedure: Stipulations for proportioning Grade designation: M35 Type of cement: OPC 43 grade conforming to IS-8112 Type of mineral admixture: Fly ash conforming to IS…

Assuming the plot size to be 9.5m x 12m = 114m^2 Assumed size of columns = 300mm x 300mm Assumed size of beams = 300mm x 450mm Wall height = 4.5m Wall thickness = 230mm Slab thickness = 125mm Therefore, assumed size of the rooms for Ground-floor Living room = 5.5m x 6m Bathroom =4.5m x 2.5m Storage room = 2m x 3.5m Master…

Aim:- Creation of geometries by Coordinate system methods using AutoCad Objective:-  To learn basic geometric designs used in building drawings. To get proficient in AutoCAD. Learn to read structural drawings, units and dimensions. To learn different co-ordinate systems in AutoCAD. Steps for P-1 :- Using Absolute…

AIM:- TO DRAFT CHAMFER AND FILLET TO VARIOUS GEOMETRIES USED IN AUTOCAD. INTRODUCTION:- This project is based upon the use of various designs that are used in designing the structures with the use of Chamfer (CHA) and Fillet (F) tools which are used to work with the edges and corners of the structures. These tools give…

Aim:- Creating a Floor plan, Footing detail, and Isometric view using AutoCAD. Introduction:- This project has drawings in which most of the commands are used which are useful to make drawings easier to draw on AutoCAD and also introduces the use of the isometric plane. Use of the Line command with ortho ON/OFF. Use…

AIM:- Creating a Residence Layout, Seating plan, Toilet, and Utility room plan using AutoCad. Introduction: In this project, a depiction of the housing plan is given for the student to get an idea of the work. This project involves the uses of various tools such as- Line tool Circle tool Arc tool Chamfer tool Fillet…

Aim & Introduction:- Creation of Column Schedule and Drawing Template using AutoCad. This project deals with detailing in the drawings of various structures used in the construction industry. In this project, there is a TEXT command, Leader tool, Hatch tool, etc.   Aim:- COLUMN SCHEDULE Procedure:- Type…

Aim - To draw the cabinet, floor plan, kitchen, column details, and raft layout drawings: Procedure: Tools used in AutoCAD -  Line - To draw a horizontal and vertical line of known distance - command "L" - select the start and end points. Rectangle - To draw a rectangle - command "REC" - select the first point…

Aim : To draw - (a) Plan (b) Section (c) Dimensioning Procedure : Commands used :       1. Dimension - Command "DIM".                           - To edit dimension style, text, etc. command "D"              …

  Aim : To draw - 1. Architectural Drawing (Floor Plan, Elevations, and Sections)                                    2. Structural Drawing (Column, Bean, Footing Plan)            Procedure : Commands…

Aim: To create- Template, inserting text and attributes. Doors of warehouse and placing it in blocks. Electrical legend and making it blocks. Different types of door for residential project. Drawing bars, making it as block and making it as a table as bar bending schedule. Procedure: Commands used- Block- To make…

AIM:- To draw (a) Kitchen Layout (b) Elevation (c) Section Commands used :       1. Dimension - Command "DIM".                           - To edit dimension style, text, etc. command "D"                …

AIM:- To create the layout of plan and section, creating viewports, editing attributes and taking a plot. To create a kitchen layout in an A4 sheet and take a plot. To create multi-viewports for industrial section drawing, scaling it and taking a plot. Commands Used: VIEW-  To create different views in model space…

 3D MODEL AND VIEW OF FURNITURE ELEMENT, ISOLATED FOOTING, AASTHO TYPE GIRDER,DROP COLUMN WITH PANEL AND WALL  AIM : To create 3D model and view of:    1. Furniture element    2. Isolated footing    3. AASTHO type girder    4. Drop column with panel    5.…

Aim of the project: To draw the given 3D figures. The drawing in the project is done with help of AUTOCAD software.  Procedure: Step 1: The units of the drawing sheet are set to Engineering precision. Step 2: For the first question the dimensions lines are drawn using a spherical coordinate system.  Step…

    THREE DIMENSIONAL RENDERED VIEW OF A RESIDENTIAL BUILDING       Aim : To draw a residentail building in 3d and create the rendered view .      Residential building with G+ 5 floors with 4 units in each floor.      a. Creating 2d plan      b.  Making 2d plan into 3D       c. Assigning matrerials      d. Camera settings…

1) AIM:  To create a new project ( Structural/ Architectural/Construction template ) and name the project appropriately   PROCEDURE: Step 1 : (OPEN A FILE ) Open Revit software  After this click on New      Then click on ARCHITECTURE TEMPLETE > PROJECT> OKAY  STEP 2 : (SAVE…