program forward kinematics of 2d robotic arm through this we can find workspace occupied by the arm so that we can use in different application in industry. in this program, I considered 2 links with the following parameters length of first link l1 length of the second link l2 variable theta values as theta1 and…

    objective:  To write a program that solves the following ODE and to create the animation of a simple pendulum. This ODE represents the equation of motion of a simple pendulum with damping   explanation: ODEs (ordinary differential equations)are used to define the behavior of the systems by using…

Aim:-optimization of stalagmite function using genetic algorithm in Matlab. stalagmite:- the physical appearance of stalagmite is a type of rock formation that rises from the floor of a cave due to the accumulation of material deposited on the floor from ceiling drippings.  function representing the shape of the stalagmite…

AIM: parsing NASA thermodynamic data    parsing:  To parse is to break up a sentence or group of words into separate components, and script it in a high-level language that can be compiled and converted into machine language. so that the user can get the data that he wants. NASA came up with a polynomial…

aim:- to create the mesh and 1D elements with given specifications on the given component as shown below                                                              …

Objectibe:- Chalenge is to mesh the given components with given criteria  As we are suposed to mesh the component for crash analysis so we suposed to use mixed option rather than quad.  Steps to follow:- There are few steps to follow while creating a mesh  Important thae component Arange the components in sequence tonbe…

 AIM: to create 3d tetra meshing on given three components.   Create a Teramesh for Housing component with the following quality criteria. TetraMesh Generation Method: 2D to 3D Conversion Elements sizes: Min- 2 Units, Target- 5 Units, Max- 7 Units  Tet collapse: 0.15 it has two components    …

  AIM: to create  1D connectors  in this, we need to mesh the given component with the following criteria S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2 Units 6 Max. Length 8 Units 7 Min angle Quad 45 8 Max…

Aim: Meshing of given plastic component and assighning thick ness to it Image Procedure: Thae component divided into base surface and inner surface Component of basebsurface has constatnt thickness Inner surface has ribs and some more features having different thicknes values.  Threfore in step 1 ectract the mid surface…

Aim: The meshing of given plastic component and assigning thickness to it Procedure: The component is divided into base surface and inner surface Component of base surface has constant thickness Inner surface has ribs and some more features having different thicknes values.  check the thickness value at a different location…

Aim:- to mesh the given sheet metal component                                                       back wheel panel body the mesh should follow the below criteria S.N Quality Criteria …

2d meshing of sheet metal(hood component) aim: pre-processing of hood automotive components for crash analysis. given hood components:                                                               fig 1: flange                                                                                  fig 2:-finge                …

Aim: to morph the given components according to the guidelines for component 1 we can follow the video and make sufficient changes to it for component two we need to morph the areas as shown in bellow figure: where we need to increase the height of the dog houses and ribs. introduction: MORPHING: it is a technique used…

Project_1(floor meshing)objective           1 .      The generated mesh must be exported into Optistruct (.fem) or Radioss (.rad) format.          2.      The Mid-surface and the Original Geometry (Parent…

Week - 4 - 2D meshing for Plastic components(cap meshing)ObjectiveFor the given Plastic Bottle Cap model, check for geometrical errors and take the mid surface using suitable mid-surfacing techniques. PID and Thickness assignment must be done for all the mid surfaces. Mesh the same with the given element Quality criteria. …