MODELING AND RENDERING OF AMERICAN CHOPPER IN SOLIDWORKS   OBJECTIVE:- The main objectives of this project are: To create individual parts of chopper using Solidworks To assemble all the individual parts into a chopper To know the application of decals,lights,camera etc. To create photorealistic model and render it using…

Name_Radar_Mast       Name_Yatch_Assembly         REPORT MODELLING, ASSEMBLING &  PHOTO REALISTIC RENDERING OF AN AMERICAN PREDATOR YATCH   OBJECTIVE:- The main objective of this project are: To design and model all the parts of an American Predator Yacht and assembling…

CASING DESIGN SHEET METAL OBJECTIVE To Design a Sheet Metal Casing using NX CAD INTRODUCTION NX sheet metal design software incorporates material and process information in sheet metal-specific modeling features: bends, flanges, tabs, cutouts, beads, dimples, louvers, corner and edge treatments, patterns and other formable…

BOX ASSEMBLY OBJECTIVE To observe the model & design the sheet metal by using given dimensions & instructions. INTRODUCTION  NX sheet metal design software incorporates material and process information in sheet metal-specific modeling features: bends, flanges, tabs, cutouts, beads, dimples, louvers,…

 Title of the project: Designing odd shaped enclosure using NX Cad. Objective:  To design an odd shaped enclosure using NX Cad. To learn the features the involved in creating in the odd shaped enclosure. Introduction:  NX Sheetmetal environment can be used to create sheetmetal design with all the manufacturing…

TITLE : SHEET METAL BRACKET USING NX CAD OBJECTIVE :  The purpose of this project is to design an aesthetic CAD model of an sheet metal BRACKET using siemens NX_CAD sheetmatal workbench. INTRODUCTION :The sheet metal parts can be found from thesmall light fixtures to the automotive body parts because of their…

TITLE : SHEET METAL BRACKET-II USING NX CAD OBJECTIVE :  The purpose of this project is to design an aesthetic CAD model of an sheet metal BRACKET using siemens NX_CAD sheetmatal workbench. INTRODUCTION :The sheet metal parts can be found from thesmall light fixtures to the automotive body parts because of their…

Benchmark with present available cars in market for the following case.   Mr.D.S. Pughazhyendhii is a married man who lives in Bangalore which is a highly crowded city.His Family comprises of five members including his wife, five-year-old boy, his father and mother. He visits his native place Madurai which is 500kms…

Underbody Coating And How It Protects Your Car Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on when the car is just out of the dealership and is clean. But even if you are getting the undercoating applied…

                                                                HOOD DESIGN Introduction:- A car hood, also referred to as a bonnet in some other countries, is the hinged cover that rests over the engine of a front-engine vehicle. Its purpose is to provide access to the engine for repair and maintenance. A concealed latch…

Wheel Arch It is a curved part of the Fender positioned right above the Wheel. The Wheel Arch is designed such that itprotects both the pedestrian and car cabin from mud, water rocks and other road spray. Different catuies havedifferent wheel arch regulations in place, and the wheel arch design has to comply with them…

 Report on Section Modulus calculation and optimization Section Modulus Section modulus is a geometric property for a given cross-section used in the design of beams or flexural members. Other geometric properties used in design include area for tension and shear, radius of gyration for compression, and moment…

Design Fender Using NX CAD Introduction A fender is the curved portion of the car's body that sits over and houses the wheels.The purpose of a fender is pretty simple. Its purpose is to keep mud, rocks, and other road debris from being thrown around by the tires. In other words, the fender is a housing for the wheels that…

                                                                Roof Design Introduction An automobile roof or car top is the portion of an…

                                                             Design Back Door Introduction: A car door is a type of door opening, typically hinged on its front edge, but sometimes attached by other mechanisms such as tracks, for entering and exiting a vehicle. Doors most often integrate side windows for visibility from…

AIM- Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Take the Thickness of the component to be 2.5 mm DRAFT ANALYSIS…

ABSTRACT A Bracket is a component used to support load or any attachments to structural element for heavy vehicle. In an automotive vehicle, the engine rests on brackets which are connected to the main-frame or the skeleton of the car. Hence, during its operation, the undesired vibrations generated by the engine and road…

AIM:  to make a model from the provided class-A surface. INTRODUCTION: CLASS-A SURFACE: a surface made by the designer which is given as an input to the plastic modeler to work on. It is aesthetic surface and the outer most surface. CLASS-B SURFACE: a surface below a certain thickness from the class-A…

BUMPER DESIGN AIM: to make a model from the provided class-A surface. INTRODUCTION: CLASS-A SURFACE: a surface made by the designer which is given as an input to the plastic modeler to work on. It is aesthetic surfaceand the outer most surface. CLASS-B SURFACE: a surface below a certain thickness from the…

                                                     Attachment Feature Creation (Ribs & Screw Boss) AIM: To Create the Door Handle Component from the given Class-A surface. To Create…

 SCREW BOSS AND DOG HOUSE DESIGN ON COIN HOLDER AIM- Create the screw boss and dog house for the centre console coin holder considering the design rules mentioned in the video. General Rules for Screw bosses. Draft of 0.5 degree on walls of boss Thickness is 40% of the nominal wall at the base. Height to diameter…

DOOR TRIM LOWER Aim: To Create the Door trim lower component through the given Class-A surface. Objectives: • Creation of Tooling axis with appropriate draft angle. • Creation of other surfaces (eg, B and C surfaces) for creating a solid component. • Perform Draft analysis on Class A surface and Solid model…

DESIGNING A PILLAR USING MASTER SECTION OBJECTIVES To improvise the Class A surface by resolving bad patches and adding flanges to it.  To create A pillar solid model with the help of  improvised class A surface. To create B side features for the A Pillar using the master section given to us as an input. To create…

Aim- Create the Core and cavity blocks for the switch bezel designed in the earlier challenge.  NOTE: Tree Structure Ensure Proper Tree Structure Geometrical sets should have a proper name based on the sketches present inside of it All the sketches should be created under the Geometrical set  Use the Close…

                 DESIGN AND ASSEMBLY OF QUICK RETURN MECHANISMAIM:To create 2 assemblies according to the content covered in the course videos. You will be provided with 2D diagrams of the components and you will have to first create the individual part files and then create…

AIM: To design and development of vehicle interior door trim using Catia V5 with given class A surface along with Master section. Alsocreate the Side Attachment features as per design rules. OBJECTIVE:To create thickened part using master section for reference.To create the mounting features as per design guidelines…

Assemble and apply GD&T to the butterfly valve assembly drawing A butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disc that rotates. A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully…

AIM: To simulate the forward kinematics of a 2R Robotic Arm,  GOVERNING EQUATION:- Equation and Cordinates used- x0=0;y0=0; x1=l1*cosd(theta1);y1=l2*sind(theta1); x2=x1 + l2*cosd(theta2);y2=y1 + l2*sind(theta2); OBJECTIVE- The main objective of the programme is to simulate a forward kinematics -2R Robotic…

Aim- to solve the second order defferential equation. Governing Equation-   Objective- write a program for solving the second order differential eqation and creat annimation for swing motion of pendulum Theory- Pendulum is a weight suspended from a pivot so that it can swing freely. When a pendulum…

AIM:  To Write a code in MATLAB to optimise the stalagmite function and find the global maxima of the function using genetic algorithm.   OBJECTIVE: To Write a code in MATLAB to optimise the stalagmite function and find the global maxima of the function using genetic algorithm To study the…

Parsing NASA thermodynamic data Aim: To write a code in Matlab to parse the NASA thermodynamic data file and then calculate the thermodynamic properties of various gas species. Objective : 1. To write a function that extracts the 14 coefficients and calculates the enthalpy, entropy, and specific heats for all the…

Aim – Create a rankine cycle simulator and plot T-s and h-s diagram. Theory – Rankine cycle is process, used in power plant to produce mechanical energy from heat. It usually uses water as working fluid. In this cycle a fuel is used externally to convert water into steam which expands through turbine and…