AIM: To create the geometries of P-1 using absolute and relative coordinate systems. INTODUCTION:  Absolute coordinate system- In this method, we take all the points of an object with respect to origin. Relative coordinate system- In this method, we refer a point from the last point, as the first point of an…

AIM: To create the cross section of Load Bearing Wall over spread footing using AutoCad. INTRODUCTION: Create a new file and set units  In the command prompt type 'un' Units > Drawing units > length type ( change the length accordingly ) > ok PROCEDURE: Select the line tool from ribbon tab, the command prompt shows " specify…

AIM: To Draft of given geomentry using Chamfer, Fillet tool in AutoCad. INTRODUCTION: Fillet tool and Chamfer tool which is used for the modification purpose in AutoCad.  Fillet and Chamfer sketching can be done by using,Ribbon:Home>Modify>Fillet/Chamfer dop-down;Toolbar:Modify>Fillet/Chamfer;Command:Fillet/Chamfer…

1, AIM: To Sketch the layout of the residence as shown in figure 1. INTRODUCTION: The commands used to sketch the given layout of residence are: Line command 'L' in the command prompt. Offset command 'Off' in the command prompt or else from ribbon tab. Trim command 'TRR' in the command prompt or else from ribbon tab.…

AIM: To create a column schedule as given in the figure. INTRODUCTION: Use of ANNOTATION COMMANDS such as Mtext command and textedit command to write the text in autocad. Use of Annoatation text scale factors in order to control the size of the text. Inorder to craete the schedule of the materials or the…

1, AIM: To draw the elevation and details of the wardrobe as shown in figure. INTRODUCTION:  The tools and commands used to draft the elevation and details of the wradrobe are: Line command, Offset command,Trim command were used to draft the wardrobe. In order to insert the text and specify the dimensions - MTEXT…

AIM: To create a Layout, Section and Elevation with dimensions using AutoCad. INTRODUCTION: To draft the given layout , section and elevations the tools used are mainly: Line command, XL line, Offset command, Trim command. PROCEDURE: First the units of the sheet as Decimal type. Then set the limits of the sheet and…

AIM: TO Design and Draft a layout of a residential building. INTRODUCTION:  In order to design and draft a layout of a residential building of plot size 60'x20' with orientation east facing. The commands used are XL line (construction line), line command, rectangle command, circle command and other drafting commands…

  1, AIM:TO Create the templates as shown in the figure: INTRODUCTION: The commands used for creating templates are;Line command and offset comand In order to create the blocks, we have to defiine the block from various ways such as; From RIBBON: INSERT> BLOCK DEFINITION> CREATE BLOCK. PROCEDURE: Firstly set…

1, AIM:TO Create the kitchen layout and to provide hatches. INTRODUCTION: The tools and commands used to draft the kitchen layout are: Line command, Offset command, Trim command were used to create the kitchen layout. Use the Hatch command to hatch the walls of the kitchen layout. PROCEDURE: First set the drawing units…

AIM: TO Create a layout of a plan and section A of the Project in the Challenge 7. INTRODUCTION:  Use of template in the layout in order create paper print of the project. In order to plot the project Drawing in layout, use of VIEWPORTS and creating VIEWS are essential. To define the view through ribbon tab>>…

1, AIM: To Create a 3D Furniture element as Shown in Figure. INTRODUCTION: In order to design 3D model, we have to change the working spacing as 3d modelling or 3d basics. In 3D modelling, we have to work in 3-dimensional such as x-axis, y-axis and z-axis. We can work by changing the visual styles such as Top…

1, AIM: TO Create the 3D view of the Building Plan and elevation. INTRODUCTION: Using of various commands and tools such as subtract,slice, 3d mirror, 3dmove, assigning materials, rendering and creating cameras, fixing lights was introduced. In order to create the 3d view of building plan, the commands used were polysolid,…

AIM: To Create a 3 dimensional model of the residential building with a rendered view. INTRODUCTION:  Use of the 2d workspace with commands such as line command, rectangle command, offset command and other drafting tools like trim, move, copy , rotate and such various commands. In order to move the 2 dimensional…