CATIA Assembly Model drawing 1 Model Drawing 2   Go to File- New - Product and name as skeleton then click OK. To make the publication a feature like a point, axis system, or line. Open the toolbars, Product Structure Tools, and Constraints. Use the button Existing Component from the Product Structure…

1. Screenshots of the Draft analysis report for both the given Class-A surface and the final plastic component Draft analysis for given Class-A surface Draft analysis for final plastic component 2. Screenshots of the solid model various orientations (Isometric, Front, Side, and Top View) Isometric view Front…

1. Tooling axis creation and draft analysis for switch bezel class A surface Procedure for tooling axis creation: First the connectivity between the surfaces to be checked, by using the join option see how the surface is connected and ensure that there are no surface gaps in between the component.  By using multiple…

BUMPER DESIGN AIM: To create the bumper plastic component through the given Class A Surface and to perform draft analysis on the plastic component. OBJECTIVES: Create the Tooling Axis Create the Class B and C Surface Create the Close Surface Perform Draft Analysis SPECIFICATIONS: Bumper Thickness = 3mm Minimum Draft Angle…

Attachment Feature Creation (Ribs & Screw Boss) Design of the door handle with engineering features: AIM: To create the door handle component by generating the class B and class c surfaces with the aid of class A provided and creating the B side features including the ribs and the screw bosses by following the…

Attachment Feature Creation - Dog House AIM Create the Dog House for the Door Trim considering the design rules. INTRODUCTION DOG HOUSE The dog house is an engineering feature used in plastic design. Dog houses are used as a support feature. Sometimes other engineering features like snaps, locators, and screw bosses are…

Week 10 - Challenge 3 - Door Trim Lower with Engineering Features Objective: The main aim of this challenge is to create a solid body of 'Door Trim Lower' with the help of the closed surface method by using the 'Generative shape design' workbench in CATIA V5. Performing the 'Draft Analysis' on the solid part body…

Week 11 - Project - A pillar Design with Master Section AIM: To create the A Pillar Design with the master section given as the intersection sketch with the Class A surface and create the tooling axis and perform the Draft analysis for the final solid part. Class A surface: A visible surface is a Class-A surface. It provides…

AIM: To develop the Door Trim panel OBJECTIVE: Creation of CAD model considering the following inputs as like in OEM and tier1 companies Class A surface Nominal thickness: Refer to master sections Attachment strategy :  Find an attachment strategy for the door panel complete work. Use Push pin with Dog house for Lower…

Hood design-Week 2 AIM: To design the Hood or Bonet of the front driving car by using the master section and standard procedure which is used in the OEM Manufacturer. GIVEN MASTER SECTION: HOOD or BONET: Hood is the component which is placed over the engine compartment. The design of the hood is not only to enhance the…

Aim: To find the section modulus of the hood and optimization to improve the overall section modulus.   Objective: Use the section from your Hood design and calculate the section modulus using the formula S= I/y.   Section Modulus: The section modulus (S) is geometry property of the cross section used for designing beams…

DESIGN A FENDER USING NX CAD: OBJECTIVE: The objective is to Design a Front Fender from the given Class A Surfacing with Drip Area, Bumper Mount, Cowl Mount, Sill Mount, and A-Pillar Mount. INTRODUCTION: Fender is the US English term for the part of an automobile (vehicle body) that frames a wheel well (the fender…

ROOF DESIGN WITH REINFORCEMENTS, ANALYSING HEAT DISTORTION CRITERIA & SNOW LOAD PREDICTION OBJECTIVE: The objective of this project is to design a BIW Roof of a car with Front Roof Rail, Bow Roof Rail, Center Roof Rail, and Rear Roof Rail by following engineering standards. The roof must be subjected to a Draft Analysis…

CAR BACK DOOR DESIGN Aim: To design a BIW of the Back Door from the given Class A Surfacing. The inner Panel is designed and assembled with Hinge Reinforcements, Gas Stay Reinforcements, Wiper Motor Reinforcements, and Latch Reinforcements. Introduction: In this project, I have designed a back door for a hatchback…

Photo Realistic RenderingObjectiveThe main objective of this project is to obtain sustainable knowledge in SOLIDWORK part modelling, SOLIDWORK assembly and rendering through,Modelling each part of the American chopper with proper Dimensions and appearance using the SOLIDWORKS part.Assembling all the parts of the American…

Final Independent Project:Arjun Main Battle Tank Design and Assembly in SolidWorksObjective:Design the parts of the Arjun Main Battle Tank.Assemble the parts in solidworks assembly.Render a high quality image using photoview 360 and SolidWorks Visualize.Arjun Main Battle Tank:The Arjun is a main battle tank (MBT) of the…

Boeing-747 _ Final_Project of BoeingOBJECTIVE: Creating a boeing-747 full body structure using the 2D sketch entities and 3D feature and assemble the all parts with realistic rendering.INTRODUCTION:The Boeing - 747 is a large and long range Wide-body airliner  designed and manufacturated by Boeing commercial…