AIM: To calculate the Concrete mix disign for M35 grade of concrete with Fiy ash    I. STIPULATIONS FOR PROPORTIONING OF M35 GRADE CONCRETE This section has Specifications of the materials and requirements of the concrete to be made.   View in landscape mode for better view in mobile. A Grade Designation M35   B Type of…

Aim: Sketching the G+1 floor residential plan satisfing the vastu Shastra and calculating the acting on building with giving the information of the drawings. Ans:- Graund Floor 1 Floor   Opening the provided above the ground level for the aesthetic look All door are inwards Main door is facing the north direction…

Q-1   A)P-1 Aim :- To draw the given drawing using AutoCAD by absolute coordinate method Procedure :- Set all limits as per given drawing Take line command and set origin point at (2,1) And draw the second point (6.0)and continue with (0,1)(-5,0)(4,0)(0,5)..... Joint all the lines correctly and then measure dimension…

Q:-1 Aim:- To creating a floor plan, footing detail and isometric view using AutoCAD Introduction:- the main objective of this assignment is get in touch with various tools in AutoCad like the rectangle, polyline,modification tools like copy move offset and model like snap mode and ortho mode. These tools will be understood…

Q-1:- 1. Aim: To draw the given geometry in AutoCAD software using unit of measurement as decimal unit. Introduction Various commands used to draw the geometry. QNEW command Line command Circle command Dimensions Procedure Open AutoCAD software. Type QNEW in command box and press enter. In wizard setting select advanced…

Q-1:-  Residence Plan:- Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors. A) AIM:- Draw given drawings by using Autocad…

Aim :- Create a column schedule as shown in the figure. Introduction :- Column schedule means the table containing all the details of column required during construction process. Column schedule contains marking of column ,size of column and numbers of bars, diameter of bars used,stirrups details and location of bars etc.Column…

Q:-1 Creating Architectural Drawings. (Floor Plan. Elevations, and Sections) for a plot size of 60'x20' and developing relevant basic structural drawings (Column, Beam. Footing Plan). Aim:- To create Architectural Drawing (Floor Plan, Elevations, and Sections) for a plot size of 60'x20', facing east, and to develop relevant…

  Q-1 :- Create the Plan and Section as shown in the Figures. Use proper dimension techniques and dimension styles to the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required. Aim: To draw the Plan and Section using AutoCAD software. Introduction:…

Creating Architectural Drawings. (Floor Plan. Elevations, and Sections) for a plot size of 60'x20' and developing relevant basic structural drawings (Column, Beam. Footing Plan). Aim:- To create Architectural Drawing (Floor Plan, Elevations, and Sections) for a plot size of 60'x20', facing east, and to develop relevant…

1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Customl_titleblock and Custom2_titleblock, respectively.…

1.Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. Alm: To draw the kitchen layout using AutoCAD software. Introduction: Various commands used QNEW…

Creating Multiple viewports, Scaling the drawing and setting in Template in AutoCad Q-1:- 1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure.  Aim: To create layout of the Plan and Section A of the project in Challenge 7 as…

  Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad Q-1:- Create a 3D Furniture element as shown in the Figure.  Aim: To create a 3D Furniture element as shown in the figure above in AutoCAD. Introduction: The 3D furniture is created in AutoCAD in 3D…

Creating 3D Isometric view of various structural elements in AutoCAD Q-1. Create a 3D Isometric View of the building with plan and elevation given. Aim: To create a 3D Isometric View of the building with plan and elevation as shown in the figure above in AutoCAD Introduction: The 3D Isometric View of the building with…

Project 2_Creating a 3D rendered model for a Residential Building in AutoCad. Create a 3 dimensional model of the residential building with a rendered view. Aim: To create the 3D rendered model for a Residential Building in AutoCAD. Introduction: The 3D view of a wall spread footing is created in AutoCAD in 3D Modelling…

Q-1:-  From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately A) 1)Open the revit  2)Click on new project and select the type we need whether (Structural / Architectural / Construction template ) 3)And save project name as project1 Q-2:-  Save the…

1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. A) Building Information Modeling(BIM):- BIM is an acronym for Building Information Modeling or Building Information Management. It is a highly collaborative process that allows architects, engineers, real estate developers,…

Creating Walls, Partition walls and Floors for a residential layout using REVIT   1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create…

3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT   1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level.…

Q-1:- Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ?   ANSWER:- BUILDING CODES of standard modelling.      A model building code organisation is a set of building codes that are developed and maintained by a standard organisation.  This standard…

Q-1:- Open an architectural template . Using Manage tab set project base point and project shared coordinates for the project AIM:- Set the base point of the project using manage tab and project shared coordinates for the project Commands used:- Collaborate Architectural  Grids manage   Procedure:- Select…

1) Select the type of structure you want to build from one of the three below        a. Multi Unit Residential Apartment        b. Office Buildings        c. School Ans:- As per the given options in the question I am opting for Multi Unit Residential Apartment…

QUESTION 1)   What are HVAC systems ? Why are they essential in modeling of buildings? ANS 1)         HVAC system is one of the important component in the modeling of a building. The term HVAC stands for Heating, Ventilation and Air conditioning. Now lets get into these terms, Heating…