Aim of the project:- Concret mix design for M35 grade concrete with fly ash and M50 rade concrete without fly ash. Introduction:     power plant fuelled by coal produce a significant quality of the elecricity we consume in the world today. But in addition to elecricity, these plant produce a material that…

1) web distance is 5m 2)  3) the length of incliend line 3.60m, inner M incliend line 2.83m

Aim:- Creating a floor plan, footing details and isometric view using autocad. Introduction:-  In this project by using basic command make a footing details and flooring plan in 2D.Isometric drawings are not actual 3D drawings, they are made with 2D geometries but they appear like 3D. Isometric drawing in AutoCAD…

Aim:- Drafting of various geometries using Chamfer, Fillet tool in AutoCad Introduction:-       The fillet command is used to create rounded edges between the adjacent lines and faces in 2D and 3D. It is also used to connect two tangent arcs in 2D.Rounds are the softening of convex edges of geometries…

Aim:- Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad

AIM:- Creation of Column Schedule and Drawing Template using AutoCad INTRODUCTION:-           In Autocad we know the different commands and geometrical shape. By using this all properties we can make any type of drawing as per scale. and it is clear and visible. following are the objectives…

Aim:- Create different section by using autocad. Introduction:- The Autodesk added functions to their main CAD commercial software product, so that AutoCAD can provide more benefits compared to the earlier versions of the CAD software. The AutoCAD has significant improve using its boundary representation functions. The…

Aim:- To draw the floor plans and section using the proper dimension techniques and dimension style to document the project. Introduction:-         Plan and sections are the part of drawing used to identify different internal and external level which is not mention in elevation. Plan is the graphical…

AIM: To Create Custom1_titleblock and Custom2_titleblock using Attributes and block command from Autocad software . PROCEDURE: Step 1 ( custom1_tittleblock) In the command prompt type L to draw the lines  In ribbon tab > Annotate > Mtline ( to draft the text ) go to properties tab to change the colour …

Aim: Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad All dimensions are in mm. Procedure: step 1: units are set to mm limits and limax are also set zoom comand is also used Steps for drawing Below Counter Plan Open Auto Cad and enter UN (units command)…

AIM: To create layout of plan and section, creating viewports, editing attributes and taking a plot. To create a kitchen layout in A4 sheet and take a plot To create Multiview ports for industrial section drawing, scaling it and taking a plot. COMMANDS USED: View Layout. Multiple View. Model Space. Paper Space. Scale.…

AIM: To create 3D model and view of: Furniture element Isolated footing AASTHO type girder Drop column with panel A wall Commands used: Extrude. Offset. UCS. Box. Union. Subtract. Move. 3d orbit. Loft. Sweep. Cone. Region. Boundary. PROCEDURE:  Open the AutoCAD, click on workspace switching and change it to 3d…

AIM:- To create a 3D isometric view of the given building with plan and elevation.    INTRODUCTION:-  An isometric drawing is a 3D representation of an object, room, building or design on a 2D surface. One of the defining characteristics of an isometric drawing,…

AIM:  To create a 3D rendered model for a Residential Building in AutoCAD INTRODUCTION: The main objective of this project is to understand about to create a Plan in 2D, then convert it into 3D using AutoCAD 3D, applying materials and rendering. AutoCAD is primarily used for generating 2D sketches. While it is…

Project 1 (AutoCAD) Submitted by Kanala Rahul Reddy Commands Used in this challenge Line Xline Polyline Rectangle Circle Arc Trim Move Offset Hatch Layer MatchProp Multileader Fillet Copy Explode Dimlinear Dimcontinue Dim break Dim update Hide pallets (POFF) Show pallets (PON) Q. Design and Draft a layout of a residential…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level.     AIM:- To model a Ceiling from the architecture tab above the walls at the first-floor level.     INTRODUCTION:- The creation…

  1).   Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School. From the above the options of type of structure to build a building, i need…

Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo Introduction: Dynamo is an open source visual programming language for Revit, written by designers and construction professionals. Its a programminglanguage that allows you to type lines of code;  while also creating…

  1.ans.:) Aim:- Exporting the Revit architecture and structure model to Navisworks Cache file following the export settings. Tools used:- Revit, Projects, Export option, file menu, 3D view etc. Navisworks is Used primarily in construction industries to complement 3D design packages (such as Autodesk…

Cracks-The majority of cracks occur when the building or its components or the material of which the building is made upon it’s subjected to forces that are greater than those which it can withstand. Cracks may occur in different components of a building due to- • External applied force in a different…

1)  Differentiate Static analysis and Dynamic analysis with proper representing pictures :- NO     static analysis  Dnamic analysis 1) A static analysis can only be performed if the system being simulated does not depend on time, and if the loads being applied are constant.  In a dynamic analysis,…

1)Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility. To describe the symmetry, redundancy, bi-directional stiffness, and ductility…

Aim:-Conceptual design of a building with columns and shear walls Objectives 1) To write comparive statement of a given plan with respect to seismic behaviour  2) To schemeaticaly draw the seismic srtuctural plan 1) Properties Restrained of floor shrinkage It is restrined at all corners. it is a good siuation all…

Aim: to model and analyse a 25 storey building with given specifications and to cross check the parameters as per IS 1893 provisions. Objectives:- 1) To know modelling of High rise building by using Etab Software 2) To use Sesmic IS code use for design of High Rise Building.  Procedure: Open the ETABS software. Click…

Project:- Comparative study of different storey buildings for Seismic forces. Aim:-   TO MODEL AND ANALYZE MULTIPLE BUILDINGS WITH DIFFERENT FLOOR LEVELS AND DESIGN PARAMETERS USING ETABS SOFTWARE AND COMPARE THE RESULTS TO UNDERSTAND THEIR OVERALL SEISMIC BEHAVIOUR. Introduction:-       The…

Aim:- Reinforcement Detailing of Beams from ETABS  Objectives:- 1) To know the beam design procedure by using Etab  2) To know the basic beam reinforcement deatiling with respect to primary standerd 3) To ensure the ductility reinforcement as per IS code 13920-2016 Introduction:- Beams are horizontal structural…

Aim: To Providing details of longitudinal reinforcement for the two columns from foundation to terrace level. Step 1: 1) Open a G+4 Etab file which was attached with  challenge. 2) select terrace or another plan except than mummty because in mumty level only few column are extended for design  3) select all storeys…

Aim: To run the anlaysis and design the RCC Shear walls for the given ETABS model. To know the bacics of shear wall reinforcement detailing with respect with primary reinforcement. To extract the values of longitudinal steel ratio, boundary element length and shear reinforcing ratio from the design results. To provide…

Aim:- Analysis and design High  rise building and foundation designe by using Etab and provide safe design against seismic                 action. Objectives:-  1) to model an apartment with all seismic consideration, based on given architecture plan. 2) To know…

Aim:- To design the square footing using the given details. Objectives:- 1) to know detail procedure of spread footing and respected calculation done by manual method. 2) By using given data how to calculate the sizes of footing and may data is not available then how to find out and collaborate with the data. Introduction:-…

AIM: To Analyze and designthe isolated footing from week 11 challenge on SAFE To verify the size, depth and steel provided as per calculations.  Objectives:- 1) To know general procedure of spread footing by using safe software. 2) To know detail procedure of design of pile foundation by using safe load sotware. INTRODUCTION:…

AIM:-To Create and Analyse the given building in ETABS 20the structural model has to be prepared in accordance with IS 1893 and as per IS 13920. To design the pile cap and pile reinforcement details,Tie  beam  connecting the pile caps, to sketch the column reinforcements, to produce the framing plan and beam…

 Write the steps involved to upload a .std file through web mail? Open STAAD.Pro CONNECT Edition Software Go to Share option left side on the home page Share part will open then switch from project wise to send mail and browse the .std project/file After that click on send mail 2.Name the…

  AIM:-  To explain the answer for each and every question from 1.1.1 to 3.1.5.  INTRODUCTION:-  In this section of question from 1.1.1 to 3.1.5, I used staad.pro software to answer these question. Besides this, I have used some reference from recorded video session of skill-lync. and solve with software…

Aim:- To solve all the question related with load and slab dsign 1) State the primary load cases to be considered for design. The primary load cases that are to be considered for design are listed below: Dead Load (IS 875: Part I). Live Load (IS 875: Part II). Wind Load (IS 875: Part III). Snow Load…

Aim:- Design a multi-storey Residential Building located in Bangalore using STAAD Pro Connect Edition. Objectives:- 1) Generation of structural framing plan. 2)Creation  of model of structure in STAAD PRo  3) Application of various load combination on the member. 4) Design model in RCDC  Introduction:-…