GATE Electrical: Electromagnetic Fields, part 1: Electrostatics (Coulomb's law, Gauss's law, potential, capacitance), previous-year questions solved
Every electrostatics question from the last five GATE Electrical papers: a ring charge, three point charges with zero field, a charged electron cloud, the potential between two shells, a half-filled coaxial capacitor and the work done near a charged sphere. Each solution matches the official answer key, was checked numerically (charge sums, field integrals, a Laplace solve), names the trap that costs marks, and shows where the idea is used in cables, sensors and insulation design.
Questions from official GATE EE papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); solutions by Skill-Lync. · Updated 16 Nov 2026 · 6 questions
Uniform ring charge Q of radius R: what is the force on a point charge q at its centre?
- (A)
- (B)
- (C)
- (D)
Answer: (C) Official key: C
- Split the ring into small charges . Each one pushes with a force of size , directed along the radius.
- For every element there is an identical element diametrically opposite, at the same distance, pushing in the opposite direction.
- The pairs cancel, so the net force is : option (C).
Trap: option (B) adds all the magnitudes as if the whole charge sat at one point, . Forces are vectors. Option (A) is times the potential at the centre, which is not zero: the potential is a scalar and does not cancel. We summed the forces of 3,600 point charges spread evenly round the ring: the net force is zero to machine precision.
The same symmetry is why corona and grading rings on high-voltage insulators and bushings work: a ring smooths the field near the conductor instead of concentrating it, so the air does not break down. Field-simulation tools such as ANSYS Maxwell are used to size these rings.
Charges Q, Q and αQ at (−1, 0, 0), (1, 0, 0), (0, −1, 0): what α gives zero field at (0, 0.5, 0)?
Answer: Official key: -1.7 to -1.5
- The two charges are each at distance from the point. Their components cancel; each gives a component , pointing in .
- Together: .
- The charge at is away, straight below: .
- Zero field: , so , .
Trap: forgetting that only the component of the two side charges survives, and using for each instead of . That gives . The sign matters too: the third charge sits below the point, so it must be negative to pull the field back down. We summed the three Coulomb fields as vectors: they cancel exactly at .
Superposing point-charge fields is exactly what boundary-element electrostatic solvers do, with thousands of charges, to find field-free regions and hot spots around high-voltage electrodes, bushings and MEMS sensor electrodes.
Spherical electron cloud with ρ = −3ρ₀ up to R = a: which graph is the radial field E_R?
- (A)
- (B)
- (C)
- (D)
Answer: (C) Official key: C
- Gauss's law on a sphere of radius : enclosed charge .
- , so : a straight line from 0, going negative.
- At : . Outside, the whole charge acts from the centre: , which decays as from the same value.
- Negative, linear inside, peak magnitude : Fig. (iii), option (C).
Trap: Fig. (iv), with a peak of . The factor 3 in cancels the 3 in , so the peak is , not twice it. Figs. (i) and (ii) have the wrong sign: electrons make the field point inward. We integrated the enclosed charge numerically: .
Space charge trapped inside the XLPE insulation of HVDC cables builds up exactly like this cloud and bends the field inside the insulation, which is why HVDC cable makers measure it (pulsed electro-acoustic method) and limit it with special compounds.
Concentric shells at r = c (V₁) and r = d (V₂): what is V(r) between them?
- (A)
- (B)
- (C)
- (D)
Answer: (B) Official key: B
- There is no charge between the shells, so Laplace's equation holds. With depending only on : , so .
- and : subtracting, , so .
- .
- : option (B).
Fast check in the hall: put and into each option. Only (B) gives and ; (A) gives at but at . We also solved Laplace's equation by finite differences for three sets of radii and potentials: only (B) matches the numerical everywhere.
This field is the starting point for sizing spherical high-voltage electrodes and the sphere gaps (IEC 60052) used to measure impulse voltages in HV labs: the field is highest at the inner sphere's surface, so that radius sets the breakdown voltage.
Coaxial capacitor with dielectric in half the annulus: what ε_r makes the capacitance 5C₀?
- (A)4
- (B)5
- (C)9
- (D)10
Answer: (C) Official key: C
- The dielectric fills one half of the annulus along its whole radial depth (it is split by a radial line, not by a circle). Both halves see the same voltage between the same two conductors, so they are two capacitors in parallel.
- Air half: . Dielectric half: . Total .
- , so : option (C).
Trap: answering 10 by thinking 'half the space, so double the needed ratio', or 5 by ignoring the air half. If the dielectric were a concentric layer (split by a circle), the two parts would be in series and the answer would be different, so look at how the figure splits the region. We solved Laplace's equation on a polar grid with in half the annulus: for .
This parallel split is exactly how a capacitive level sensor works: a coaxial probe in a tank is partly in liquid and partly in air, and the capacitance rises linearly with the wetted fraction. Fuel gauges in aircraft and level transmitters in process plants are built this way.
Charged sphere of radius 2 m: what work moves a charge from (−3, 0, −4) to (0, 0, 4)?
Answer: Official key: 0.38 to 0.42
- Total charge: .
- Both points are outside the sphere: m and m. Outside, the sphere acts like a point charge, .
- . With : .
- , .
Trap: computing the path length or using the straight-line distance between the two points (8.06 m). The electrostatic field is conservative, so only the start and end distances from the centre matter. The odd-looking charge is chosen to cancel the . We computed the potential at both points by summing the ball's charge cell by cell (55,296 cells): .
The energy a charge gains depends only on the potential at its start and end points: that is how the accelerating voltage of an X-ray tube or electron-beam welder sets the beam energy, whatever the electrode shapes in between.