GATE Electrical General Aptitude: spatial and picture questions solved (2022-2026)

Every GATE EE paper from 2022 to 2026 had General Aptitude questions you answer from a picture. The five papers set 10 of them, worth 15 marks: a flipped disc, a 45° rotation, a missing piece, a hexagon, a room layout, racks and pinions, a coded circle, an ant on a grid, a triangle count and a row of bulbs. Every figure is redrawn and every answer checked by a script, from all 720 hexagon placements to a step-by-step bulb simulation.

Questions from the General Aptitude section of official GATE EE papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); figures redrawn and solutions by Skill-Lync. · Updated 16 Nov 2026 · 10 questions

GATE 2022 · EE · Q.5MCQ · 1 markFlips, rotations and missing pieces

A disc with identical front and rear views is flipped about axis 1-1, 2-2 or 3-3 at random: probability the views change?

The figure below shows the front and rear view of a disc, which is shaded with identical patterns. The disc is flipped once with respect to any one of the fixed axes 1-1, 2-2 or 3-3 chosen uniformly at random.
What is the probability that the disc DOES NOT retain the same front and rear views after the flipping operation?
Front and rear views of a disc, identical pictures: a vertically hatched sector from 9 o'clock up to the upper-left axis, a horizontally hatched sector from 3 o'clock up to the upper-right axis and a horizontally hatched quarter at the bottom. Axis 1-1 is vertical; in the front view axis 2-2 rises to the right and 3-3 to the left, in the rear view the labels 2 and 3 are swapped112233Front View113322Rear View
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (C) Official key: C

  1. Read the labels, not just the shading. The two views show the same picture, but the rear view has axes 2 and 3 swapped. That is what you see when you walk round to the back: left and right swap, so the rear face, seen from the front through the disc, is the mirror image of its printed view about the vertical axis 1-1.
  2. What a flip does. Turning the disc over about an axis brings the rear face to the front and mirrors it about that axis. So the new front view is the rear face mirrored about 1-1 (to see it from the front) and then about the flip axis. Two mirror images in a row are a rotation by twice the angle between the two axes.
  3. Axis 1-1: both mirrors are about the same line, so they cancel: the front shows exactly the old picture again, and so does the back. Views retained.
  4. Axes 2-2 and 3-3: each is 45° from 1-1, so the picture comes back rotated by 90°. The pattern (a 45° vertically hatched wedge, a 45° horizontally hatched wedge, a 90° wedge at the bottom) does not look the same turned by 90°. Views change.
  5. The views change for 2 of the 3 equally likely axes: , option (C).

The script keeps each wedge as (start angle, end angle, hatch direction), applies the two reflections for every axis and compares the result with both printed views: only 1-1 gives them back. Trap: (B) is the probability that the views are retained; the question asks for DOES NOT. (A) assumes identical-looking sides mean every flip changes nothing.

Where this shows up in industry

Mirror-image parts are a real risk on a PCB: a component placed on the bottom side is drawn mirrored, and a footprint flipped about the wrong axis puts pin 1 in the wrong corner. Layout tools mark pin 1 and the board side for exactly this reason.

GATE 2022 · EE · Q.9MCQ · 2 marksPositions, layouts and mechanisms

Letters P to U on a regular hexagon: RS longer than and perpendicular to PQ, RU parallel to TQ. Which is correct?

The letters P, Q, R, S, T and U are to be placed one per vertex on a regular convex hexagon, but not necessarily in the same order.
Consider the following statements:
  • The line segment joining R and S is longer than the line segment joining P and Q.
  • The line segment joining R and S is perpendicular to the line segment joining P and Q.
  • The line segment joining R and U is parallel to the line segment joining T and Q.
Based on the above statements, which one of the following options is CORRECT?
  1. (A)The line segment joining R and T is parallel to the line segment joining Q and S
  2. (B)The line segment joining T and Q is parallel to the line joining P and U
  3. (C)The line segment joining R and P is perpendicular to the line segment joining U and Q
  4. (D)The line segment joining Q and S is perpendicular to the line segment joining R and P

Answer: (A) Official key: A

  1. Know the three chord lengths. In a regular hexagon a segment between two vertices is a side, a short diagonal (skips one vertex) or a long diagonal (through the centre). Sides and long diagonals point in 3 directions (0°, 60°, 120°); short diagonals in the 3 directions halfway between (30°, 90°, 150°).
  2. Statements 1 and 2. Perpendicular segments come one from each family, and RS is the longer one. RS cannot be a short diagonal with PQ a side: every side perpendicular to a short diagonal shares a corner with it, and R, S, P, Q are four different corners. So RS is a long diagonal (through the centre) and PQ is the short diagonal across it.
  3. Statement 3 then fixes U and T. Up to turning and reflecting the hexagon, exactly one arrangement is left; going round the hexagon: P → S → Q → U → R → T.
  4. In it, T and Q are also opposite corners, so R, T, S, Q form a rectangle (its diagonals RS and TQ both pass through the centre). RT and QS are opposite sides of that rectangle, so they are parallel: option (A).
One arrangement that satisfies all three statements: RS is a long diagonal, PQ a shorter diagonal perpendicular to it, RU parallel to TQ, and RT parallel to QSPQRSTUthick: RS, PQdashed: RU, TQdotted: RT, QS

The script tried all 720 placements: 12 satisfy the three statements (one arrangement, turned and reflected 12 ways). (A) holds in all 12; (B), (C) and (D) hold in none.

GATE 2022 · EE · Q.10MCQ · 2 marksGrids, counting and step-by-step rules

An ant walks along a grid so that its distance to the top-right corner strictly decreases: which path is possible?

An ant is at the bottom-left corner of a grid (point P) as shown above. It aims to move to the top-right corner of the grid. The ant moves only along the lines marked in the grid such that the current distance to the top-right corner strictly decreases.
Which one of the following is a part of a possible trajectory of the ant during the movement?
A 4 by 4 grid of squares with point P at the bottom-left cornerP
  1. (A)Option A pathP
  2. (B)Option B pathP
  3. (C)Option C pathP
  4. (D)Option D pathP

Answer: (C) Official key: C

  1. Translate the rule. The target is up and to the right of every point of the grid. A step right or a step up always brings the ant closer to it; a step left or down always takes it further away. So the rule just says: only right and up moves.
  2. (C) goes up, right, up, right from P: allowed.
  3. (A) branches at P (a line going right and a staircase going up), and an ant draws one line, not two. Read as one path it either starts with a step left into P or ends with a step down.
  4. (B) has a step down at each end. (D) goes round a square back to P, so its distance ends where it started.

The script checks the straight-line distance to the corner at ten points along every step, starting from P: only (C) shrinks all the way. Option (C).

Where this shows up in industry

This is the monotone routing rule used by PCB and chip autorouters: a trace that only moves towards its target (Manhattan routing) has the shortest possible length, and a step backwards is a detour that adds length and delay.

GATE 2023 · EE · Q.5MCQ · 1 markGrids, counting and step-by-step rules

How many triangles in a parallelogram with both diagonals and the four midpoint lines?

How many triangles are present in the given figure?
A parallelogram with both diagonals drawn, and the four lines joining the midpoints of its sides, which form a smaller parallelogram inside
  1. (A)12
  2. (B)16
  3. (C)20
  4. (D)24

Answer: (C) 20 Official key: C

  1. Name the points. ABCD is the parallelogram, E, F, G, H the midpoints of AB, BC, CD, DA, and O the centre where the diagonals cross (labels below). The inner lines HG and EF run parallel to diagonal AC; HE and GF run parallel to diagonal BD.
  2. Smallest triangles (8). At each corner the diagonal through that corner splits the corner triangle in two: at A, the diagonal AC cuts triangle AEH into two halves. Two at each of the 4 corners: 8.
  3. Corner triangles (4). Each pair of small ones makes a corner triangle: AEH, BEF, CFG, DGH.
  4. Quarters (4). The diagonals cut ABCD into four triangles meeting at O: AOB, BOC, COD, DOA.
  5. Halves (4). Each diagonal cuts ABCD into two halves: ABC, ACD, ABD, BCD.
  6. : option (C).
A parallelogram with both diagonals drawn, and the four lines joining the midpoints of its sides, which form a smaller parallelogram insideABCDEFGHO

The script intersects the 10 drawn segments exactly (13 points), then tests every set of 3 points: they form a triangle if they are not in a line and each pair lies on one drawn segment. It finds 20. Trap: the big triangles are easy to miss because lines run through them. Stopping at the small and corner triangles gives 12; forgetting the four halves ABC, ACD, ABD, BCD gives 16.

GATE 2024 · EE · Q.2MCQ · 1 markPositions, layouts and mechanisms

P wants the table at the window, Q wants his bed near the ceiling fan: which room layout suits both?

P and Q have been allotted a hostel room with two beds, a study table, and an almirah. P is an avid bird-watcher and wants to sit at the table and watch birds outside the window. Q does not mind that as long as his bed is close to the ceiling fan.
Which one of the following arrangements suits them the most?
  1. (A)Option A: Table under the window; Bed Q next to the fan; Bed P below it; almirah top rightWindowDoorTableAlmirahBed QBed PFan
  2. (B)Option B: Table under the window; Bed Q in the far top-right corner; almirah on the left wall; Bed P bottom leftWindowDoorTableAlmirahBed QBed PFan
  3. (C)Option C: Table in the top-left corner away from the window; Bed Q along the right wall; Bed P on the left, nearer the fanWindowDoorTableAlmirahBed QBed PFan
  4. (D)Option D: Bed Q under the window next to the fan; table in the far top-right corner; Bed P top left; almirah bottom leftWindowDoorTableAlmirahBed QBed PFan

Answer: (A) Official key: A

  1. Two tests, one per person. P: is the table against the window? Q: is Bed Q the bed nearer the fan?
  2. P's test keeps (A) and (B): only there is the table directly under the window. In (C) and (D) it is in a corner away from it.
  3. Q's test keeps (A) and (D): in (B) Bed Q is in the far corner and in (C) Bed P is the one next to the fan.
  4. Only (A) passes both: option (A).

Measured on the redrawn plans (in the paper's units), Bed Q's gap to the fan is 5 in (A) against 36 for Bed P; in (D) Bed Q is close too (14), which is why (D) is the tempting wrong answer: it fails P, whose table is in the far corner.

GATE 2024 · EE · Q.9MCQ · 2 marksPositions, layouts and mechanisms

Rack A drives pinions P, Q, R and rack B: if A moves right, which statement is correct?

The assembly shown below has three teethed circular objects (Pinions) and two teethed flat objects (Racks), which are perfectly mating with each other. Pinions can only rotate clockwise or anti-clockwise staying at its own center. Racks can translate towards the left (←) or the right (→) direction.
If the object A (Rack) is translating towards the right (→) direction, the correct statement among the following is
Rack A on top meshes with pinion P; P meshes with pinion Q to its lower left; Q meshes with pinion R below it; R sits on rack B at the bottomObject AObject BObject PObject QObject R
  1. (A)Object B translates towards the right direction.
  2. (B)Object B translates towards the left direction.
  3. (C)Object R rotates in the anticlockwise direction.
  4. (D)Object Q rotates in the clockwise direction.

Answer: (B) Official key: B

  1. A to P. Rack A touches P at P's top. The top of P moves right with the rack, so P turns clockwise.
  2. P to Q. Two meshing gears always turn in opposite directions: Q turns anticlockwise. That rules out (D).
  3. Q to R. Opposite again: R turns clockwise. That rules out (C). (P and R do not touch, so there is no conflict.)
  4. R to B. Rack B touches R at R's bottom. The bottom of a clockwise gear moves left, so B moves left: option (B).

The script finds which pairs touch from the measured centres and radii (P-Q and Q-R only), then matches the speed of the two surfaces at each contact point. Shortcut: with one rack on top of the chain and one underneath, an odd number of pinions between them makes the racks move in opposite directions, an even number in the same direction. Here there are three, so B moves opposite to A.

Where this shows up in industry

Rack-and-pinion steering, CNC axis drives and printer carriages all rely on this sense rule; when a motor and gear train is assembled with one gear too many, the axis runs backwards, which is why drive direction is a standard commissioning check.

GATE 2025 · EE · Q.7MCQ · 2 marksPositions, layouts and mechanisms

In a circle of 8 sectors EF is coded 30 and HJ is coded 80: what goes in (i) and (ii)?

In the given figure, EF and HJ are coded as 30 and 80, respectively. Which one among the given options is most appropriate for the entries marked (i) and (ii) ?
A circle cut into 8 equal sectors. Clockwise from the top: HJ, (i), (ii), 30, 80, 35, FG, EFHJ(i)(ii)308035FGEF
  1. (A)(i) EH; (ii) 40
  2. (B)(i) JK; (ii) 36
  3. (C)(i) EG; (ii) 42
  4. (D)(i) PS; (ii) 14

Answer: (C) (i) EG; (ii) 42 Official key: C

  1. Find where the codes are. EF's code 30 is in the sector directly opposite EF, and HJ's code 80 directly opposite HJ. So each pair of letters is coded in the opposite sector.
  2. Find the rule. Letter positions: , , , . and . The code is the product of the positions (the sum fails at once: ).
  3. (ii) is opposite FG: .
  4. (i) is opposite the number 35, so it is a pair of letters whose positions multiply to 35 : E and G.
  5. (i) EG, (ii) 42: option (C).

Check the others: EH gives , JK gives , PS gives ; none of them is 35. (A)'s 40 for (ii) is EH's code, a trap for anyone who matches neighbours instead of opposites.

GATE 2026 · EE · Q.2MCQ · 1 markFlips, rotations and missing pieces

Which piece P, Q, R or S completes the oval and the two triangles hidden behind the '?' box?

The figure below is supposed to show three non-overlapping shapes – one oval and two triangles. Which one of the following figures P, Q, R, or S fits the missing portion indicated by ‘?’ and completes the oval and the two triangles?
An oval at top left, a triangle at top right and a triangle at the bottom, each partly hidden behind a box marked with a question mark?
  1. (A)Option P: oval top left, a sliver of a triangle top right, a triangle pointing up at the bottom
  2. (B)Option Q: same top, but the bottom triangle leans the other way (its tip on the left half)
  3. (C)Option R: same bottom, but the top-right piece is a downward-pointing wedge
  4. (D)Option S: a large half-oval on the left edge instead of the oval's lower edge

Answer: (A) P Official key: A

  1. Extend each cut edge. A straight edge that disappears behind the box keeps going straight; an oval keeps its curve.
  2. Oval: only its lower right part is hidden, so the box shows a curved bite in its top-left corner, not a whole half-oval. That rules out S.
  3. Top triangle: its two cut edges meet just inside the box, near the top, so the box shows only a thin wedge along the top edge, narrowing to a point. R's downward wedge is too deep.
  4. Bottom triangle: its two cut edges meet inside the box at a tip a little right of the middle, leaning so the right edge slopes down to the right. Q's piece leans the other way.
  5. Only P has all three: option (A).
The completed figure: the oval and both triangles extended into the box (dashed outline). Their parts inside the box are exactly option P

The script fitted an ellipse to the oval's visible edge and straight lines to each triangle's visible edges, filled in the box from them, and compared the result with each option on a 30 by 20 grid of points: P agrees at all 600 points; Q differs at 117, R at 52, S at 165.

GATE 2026 · EE · Q.5MCQ · 1 markFlips, rotations and missing pieces

Which of P, Q, R and S is figure (I) rotated 45° clockwise?

Which one of the following figures P, Q, R, or S, correctly shows the 45° clockwise-rotated version of figure (I)?
Figure (I): a square pattern of black hooks and bars on a 12 by 12 grid
  1. (A)Option P: the pattern turned 45 degrees, with the centre block of 4 by 4 cells drawn differently
  2. (B)Option Q: the pattern turned 45 degrees clockwise, every cell in place
  3. (C)Option R: the pattern turned 45 degrees, with the top-right and bottom-left blocks drawn differently
  4. (D)Option S: the pattern turned 45 degrees, with the bottom-left block drawn differently

Answer: (B) Q Official key: B

  1. All four options are tilted 45°, so the angle alone does not decide. Turn each option back by 45° anticlockwise in your head (tilt your head) and compare it with (I), one region at a time.
  2. Fix a landmark. The top-left corner of (I) is a black cell with a long bar below it; after a 45° clockwise turn that corner is the topmost point of the diamond. All four options agree there, so check the inside.
  3. Split (I) into nine 4 by 4 blocks and compare block by block. Q matches (I) in all nine. In P the centre block is (I)'s centre block turned 180°; in S the bottom-left block is turned 90° clockwise; R has both its top-right and bottom-left blocks turned 90° clockwise.
  4. So Q is the true 45° clockwise rotation: option (B).
Options P, R and S turned back by 45 degrees: the 4 by 4 blocks that differ from figure (I) are outlined (centre in P, top-right and bottom-left in R, bottom-left in S)PRS

Every option was read cell by cell from a 600 dpi render in a frame turned 45° clockwise. Q reproduces all 144 cells of (I); P, R and S are not any rotation or mirror image of (I) as a whole, because one or two of their blocks are turned on their own. In the exam, comparing small blocks is much faster than trying to rotate the whole pattern.

GATE 2026 · EE · Q.9MCQ · 2 marksGrids, counting and step-by-step rules

Seven bulbs change by two rules each step: how many are ON after step 8?

Consider a linear arrangement of seven bulbs, each of which can be in the ON or OFF states. The initial configuration of the bulbs is shown in the figure. In every Step, the states of the bulbs are changed based on the following rules:
  • Any OFF bulb with exactly one ON neighbor at the end of the previous Step is turned ON.
  • Any ON bulb with both neighbors ON at the end of the previous Step is turned OFF.
  • The state of any bulb not meeting the conditions above is left unchanged.
The state of bulbs at the end of Step 1 and Step 2 are also shown in the figure.
The number of bulbs which are ON at the end of Step 8 is ______
Seven bulbs in a row. Initial: only the middle bulb ON. Step 1: bulbs 3, 4 and 5 ON. Step 2: bulbs 2, 3, 5 and 6 ONInitialStep 1Step 2ONOFF
  1. (A)5
  2. (B)4
  3. (C)3
  4. (D)0

Answer: (B) 4 Official key: B

  1. Read the legend first: the white bulb is ON, the black one OFF. Writing 1 for ON and 0 for OFF, the row starts as 0001000: only the middle bulb is ON.
  2. Check the rules on the given steps. Step 1: bulbs 3 and 5 each have exactly one ON neighbour, so they turn ON: 0011100. Step 2: bulbs 2 and 6 turn ON, and bulb 4 (both neighbours ON) turns OFF: 0110110. Both match the figure, so the rules are being read correctly.
  3. Keep going, always using the whole row from the previous step (all bulbs change at once): 1110111, 1010101, 1010101, 1010101, 1010101, 1010101 for steps 3 to 8.
  4. It settles. From step 4 the row is 1010101 and stops changing: every OFF bulb has two ON neighbours (not exactly one) and no ON bulb has two ON neighbours. So steps 5 to 8 copy step 4.
  5. Step 8 is 1010101: 4 bulbs ON, option (B).
All nine states, with the number of bulbs ON: initial 1, step 1 3, step 2 4, step 3 6, step 4 4, step 5 4, step 6 4, step 7 4, step 8 4Initial1 ONStep 13 ONStep 24 ONStep 36 ONStep 44 ONStep 54 ONStep 64 ONStep 74 ONStep 84 ON

Bulbs ON after each step: 1, 3, 4, 6, 4, 4, 4, 4, 4. Traps: updating the row from left to right (using a bulb's new state for its neighbour) already disagrees with the printed step 1, and the end bulbs have only one neighbour, so they can only ever be switched ON, never OFF by rule 2.

Where this shows up in industry

This is a one-dimensional cellular automaton, the same synchronous update a digital circuit performs: every flip-flop reads the old states on the clock edge and all change together. Getting that wrong (updating in place) is a classic bug in simulation code.

From GATE prep to a electronics hardware career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.