GATE Electrical: Electromagnetic Fields, part 2: Magnetostatics, Lorentz force and Faraday's law (Ampère's law, curl, current sheets, induced EMF, inductance), previous-year questions solved

Every magnetostatics and induction question from the last five GATE Electrical papers: Ampère's law in a conductor, current density from curl H, an infinite current sheet, a field that must satisfy Maxwell's equations, the Lorentz force in crossed fields, induced EMF in a loop and the minimum energy of coupled coils. Each solution matches the official answer key, was checked numerically (curl by finite differences, trajectory simulation, energy minimisation), names the trap and shows where the idea is used in motors and transformers.

Questions from official GATE EE papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); solutions by Skill-Lync. · Updated 16 Nov 2026 · 8 questions

GATE 2022 · EE · Q.23MCQ · 1 markMagnetostatics: Ampere's law, curl and current sheets

Long cylinder with J = J_a r³ ẑ: what is H inside the conductor?

A long conducting cylinder having a radius ‘b’ is placed along the z axis. The current density is for the region where is the distance in the radial direction. The magnetic field intensity () for the region inside the conductor (i.e. for ) is
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (C) Official key: C

  1. Ampère's law on a circle of radius : .
  2. .
  3. , in the direction: option (C).

Trap: option (A), from integrating without the of the ring area. The area element of a disc is , which raises the power by one more. We integrated the enclosed current numerically at three radii: only (C) matches at all of them.

Where this shows up in industry

Non-uniform current density is what happens in real conductors at AC: skin effect pushes current toward the surface of busbars and motor windings. Motor designers compute the enclosed current ring by ring like this to get AC resistance, and use Litz wire or thin hairpin conductors in EV motors to limit it.

GATE 2022 · EE · Q.45MCQ · 2 marksMagnetostatics: Ampere's law, curl and current sheets

H = x² î + x²y² ĵ + x²y²z² k̂: what is |J| at (1, 2, 1)?

If the magnetic field intensity () in a conducting region is given by the expression, A/m. The magnitude of the current density, in , at m, m, and m, is
  1. (A)8
  2. (B)12
  3. (C)16
  4. (D)20

Answer: (B) Official key: B

  1. Ampère's law in point form: .
  2. ; ; (at ).
  3. : option (B).

Trap: a sign slip in the middle component ( has the reversed order, ). Here the sign does not change the magnitude, but it does change the direction if that is asked. Another trap is taking the divergence (), which is not among the options. We took the curl by central differences: , magnitude 12.

Where this shows up in industry

Electromagnetic FEA tools such as ANSYS Maxwell solve on every mesh element; the current-density plots that motor and busbar designers read to find hot spots come straight from this curl.

GATE 2023 · EE · Q.61NAT · 2 marksMagnetostatics: Ampere's law, curl and current sheets

Infinite current sheet K = 5 a_x A/m on the x-y plane: what is |H| at (1, 1, 1)?

An infinite surface of linear current density A/m exists on the x-y plane, as shown in the figure. The magnitude of the magnetic field intensity (H) at a point (1,1,1) due to the surface current in Ampere/meter is _______ (Round off to 2 decimal places).
An infinite sheet in the x-y plane carrying surface current K = 5 a_x A/m: parallel current lines all point along +x; axes z up, y to the right, x toward the viewerzyxK = 5âx

Answer: Official key: 2.49 to 2.51

  1. For an infinite current sheet, , where is the unit normal from the sheet toward the point.
  2. The point has , so : A/m.

Trap: plugging in the distance. The field of an infinite sheet does not depend on how far the point is, so the and coordinates and the height do not enter; only the side of the sheet matters (it flips the direction, not the size). Using instead of gives 5, a common slip. We built the sheet from infinite line currents and summed their Biot-Savart fields numerically: , .

Where this shows up in industry

A wide flat busbar or a PCB power plane behaves like a current sheet close to its surface, so the field just above it is about whatever the height. Power-electronics designers use this to estimate stray inductance and the magnetic field coupling into nearby gate-drive loops.

GATE 2024 · EE · Q.52NAT · 2 marksMagnetostatics: Ampere's law, curl and current sheets

H = (1/r³)(r̂ P cos θ + θ̂ sin θ) in free space: what must P be?

The given equation represents a magnetic field strength in the spherical coordinate system, in free space. Here, and represent the unit vectors along and , respectively. The value of in the equation should be ____________ (rounded off to the nearest integer).

Answer: Official key: 2 to 2

  1. Any magnetic field must satisfy ; in free space , so .
  2. Radial part: .
  3. Angular part: .
  4. Sum: for every , so .

Trap: using the Cartesian formula and forgetting the and weights of spherical coordinates. This is the field of a magnetic dipole (a small current loop or bar magnet), which always has the 2 : 1 ratio between its radial and angular parts. We converted to Cartesian components and took the divergence by central differences for to 5: only gives zero.

Where this shows up in industry

The dipole field is why the stray field of a transformer or a motor falls off so fast with distance, and why EMC rules keep magnetometers and current sensors a few centimetres from inductors. Compass and magnetometer calibration in drones and phones models nearby magnets with this exact field.

GATE 2026 · EE · Q.16MCQ · 1 markLorentz force, Faraday's law and inductance

Charge with v = 5x̂ enters E = 4ŷ and B = −6ẑ: what is the direction of the force?

A positive point charge with velocity enters a region having electric field and magnetic field . Which one of the following statements is correct for the force on the charge as it enters the region?
  1. (A)The force will be along the magnetic field but perpendicular to the electric field
  2. (B)The force will be along the electric field but perpendicular to the magnetic field
  3. (C)The force will be perpendicular to both electric and magnetic field
  4. (D)The magnetic field does not exert any force on the charge

Answer: (B) Official key: B

  1. Lorentz force: .
  2. .
  3. : along , and perpendicular to (which is along ).
  4. Option (B).

Trap: , not . With the wrong sign the magnetic part points along , but the force is still along the axis, so the statement does not change; it would matter if the question asked whether the forces add or cancel. Option (D) is wrong because the charge moves across , so the magnetic force is 30, not zero.

Where this shows up in industry

The magnetic part of the Lorentz force pushes charge carriers sideways in a semiconductor strip, which is the Hall effect behind the current sensors in every EV inverter and BLDC motor controller. Crossed E and B fields with balanced forces are also how Wien velocity filters in mass spectrometers work.

GATE 2023 · EE · Q.43MSQ · 2 marksLorentz force, Faraday's law and inductance

Charge released from rest in crossed E and B fields: which statements are true? (marks to all)

In the figure, the electric field E and the magnetic field B point to x and z directions, respectively, and have constant magnitudes. A positive charge ‘q’ is released from rest at the origin. Which of the following statement(s) is/are true.
Axes as drawn in the paper: z up, y to the right, x toward the viewer. The charge q sits at the origin; the arrow E is drawn parallel to the z axis and the arrow B parallel to the x axiszyxEBq
  1. (A)The charge will move in the direction of z with constant velocity.
  2. (B)The charge will always move on the y-z plane only.
  3. (C)The trajectory of the charge will be a circle.
  4. (D)The charge will progress in the direction of y.

Answer: Marks to all: the text and the figure disagree Official key: MTA

  1. A charge released from rest in crossed, uniform and follows a cycloid: it stays in the plane containing and , and drifts along with average speed . It never moves along , and its path is never a closed circle. So (A) and (C) are false on any reading.
  2. Reading the text ( along , along ): . The motion is in the - plane and drifts toward . (B) is false, and (D) is true only if 'the direction of y' includes .
  3. Reading the figure ( drawn along , along ): . The motion is in the - plane and drifts toward , so (B) and (D) are both true.
  4. The text and the figure give different answers, and IIT Kanpur awarded marks to all (official key: MTA).

Trap: treating the charge like one in an electric field alone (straight line along ) or in a magnetic field alone (circle). Released from rest in both, it starts along , the magnetic force bends it, and it stops momentarily at the top of each arch before starting again. We integrated the equation of motion (RK4) for both readings: after two cyclotron periods the charge is along for the text and along for the figure, with zero motion along .

Where this shows up in industry

E × B drift is the working principle of the cavity magnetron in every microwave oven and of Hall-effect thrusters on satellites, where electrons drift in crossed fields instead of hitting the electrodes.

GATE 2026 · EE · Q.51MCQ · 2 marksLorentz force, Faraday's law and inductance

Loop in the XY plane, fields at ω and 2ω over areas a₁ and a₂: what is the induced rms voltage?

The figure shows an arbitrarily shaped planar conducting loop A in the XY plane. Two nonintersecting regions with areas and within the loop are subjected to magnetic fields , and , respectively. What is the expression for the induced rms voltage in loop A?
An arbitrarily shaped planar conducting loop A in the XY plane (Z up, Y to the right, X toward the viewer) enclosing two separate small regions of areas a1 and a2ZYXa2a1loop A
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. The loop lies in the XY plane, so only the components of the fields link it: and .
  2. Flux: .
  3. Faraday: .
  4. The two terms are at different frequencies ( and ), so their rms values add in squares: .
  5. Option (A).

Trap: (B) forgets one of the two factors of (one from the in the field, one from peak-to-rms). The other trap is forgetting the factor 2 from differentiating at , which turns the into . The phase and the , components do not matter. We sampled over one full period for three sets of : the rms matches (A) every time.

Where this shows up in industry

Adding rms values in squares for different frequencies is how harmonic voltages are combined into THD on a power-quality analyser, and the flux-linkage picture is how EMC engineers estimate the noise a stray magnetic field induces in a PCB loop: only the field component normal to the loop counts, so they keep loops small and flat against the ground plane.

GATE 2025 · EE · Q.52MSQ · 2 marksLorentz force, Faraday's law and inductance

Two coupled circuits with unity coupling: at what I₁/I₂ is the stored energy minimum?

Consider two coupled circuits, having self-inductances and , that carry non-zero currents and , respectively. The mutual inductance between the circuits is M with unity coupling coefficient. The stored magnetic energy of the coupled circuits is minimum at which of the following value(s) of ?
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) and (D) Official key: A;D

  1. Stored energy: . Divide by and write : .
  2. Minimum where : .
  3. Unity coupling means , so and . Both (A) and (D) are the same number.
  4. (A) and (D). At this ratio .

Trap: picking only (A) and missing that (D) is equal to it when ; this is a multiple-select question. (B) and (C) are the reciprocal ratio, which comes from minimising over instead. We searched from to in steps of for three pairs of : the minimum is at every time, and the energy there is zero.

Where this shows up in industry

This is why an ideal transformer stores no energy: the load current's ampere-turns cancel the primary's, which is exactly the zero-energy ratio here, and only the magnetising current stores energy in the core. Flyback converters do the opposite on purpose, with a gapped core that stores the energy each cycle.

From GATE prep to a motor design career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.