Mix design for M35 grade concrete with fly ash   Aim : Mix design for M 35 grade concrete with fly ash  Procedure:      Step :1       Stipulations for proportioning       a. Grade designation : M35       b. Type of cement : OPC 43 grade conforming…

I COMPLETED MY ASSESSMENT,  "Creation of geometries by Coordinate system methods using AutoCad" PLEASE CHECK THE AUTOCAD FILE ATTACHED IN BELOW.

I COMPLETED MY ASSSEMENT OF Creating a Floor plan, Footing detail and Isometric view using AutoCad FILE IS ATTACHED IN BELOW

I COMPLETED MY ASSESSMENT OF Drafting of various geometries using Chamfer, Fillet tool in AutoCad FILE IS ATTACHED IN BELOW

I COMPLETED MY ASSESSMENT Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad FILE IS ATTACHED IN BELOW

Creation of Column Schedule and Drawing Template using AutoCad DRAWING IS ATTACHED IN BELOW.

Creating a Layout, Section and Elevation with dimensions using AutoCad AIM:         To Creating a Layout, Section and Elevation with dimensions using AutoCad. PROCEDURE:         STEP-1:                          …

AIM:     TO PREPARE A TOILET BLOCK BUILDING FOR A SCHOOL BUILDING BY THE PRESENTATION OF ARCHITECTURE AND STRUCTURAL          DRAWING. INTRODUCTION:      THIS PROJECT CAN BE SHOWN A STRUCTURAL AND ARCHITECTURE PLANS FOR TO CONSTRUCT A TOILET BUILDING FROM THE EAST FACING.…

AIM:            To Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad. INTRODUCTION:             In this project we have to create a title block, type of door panneling and bar bending schedule as…

  AIM:       To Create a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad. INTRODUCTION:        Put a detailed specification and sketch for aspect conditions, look the plan and draw a residential buliding arch plans and make a each …

AIM: To Create a various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad INTRODUCTION: This topic may to learn a 3D model by the tools and frames were clearly study then we can to use the autocad 3D tools                   …

AIM:          To Create Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad. INTRODUCTION:          Create the plan, elevation and section of the industrial building aspect conditions of building dimensions has…

AIM:          To Create a Multiple viewports, Scaling the drawing and setting in Template in AutoCad. INTRODUCTION:          To create the viewports in scale units from the structural & architecture drawings were neatly attached.  PROCEDURE: STEP-1: …

Creating a 3D rendered model for a Residential Building in AutoCad VIEW-1:  PLAN a. BEFORE RENDERING: b. AFTER RENDERING: VIEW-2:  ELEVATION SECTIONAL VIEW:

1.  From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project                  appropriately      STEP-1: Go to file < New < Project             STEP-2: New…

1. Building Information Modeling (BIM) is the holistic process of creating and managing information for a built asset. Based on an intelligent model and enabled by a cloud platform, BIM integrates structured, multi-disciplinary data to produce a digital representation of an asset across its lifecycle, from planning…

1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created from…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level  AIM: To create a ceiling from a groundfloor roof to apply the member in specific level.  PROCEDURE:     STEP-1: Select the ceiling…

1.  A building code is a set of rules to regulate the construction activities across the country. The building code includes basic building requirements coupled with administrative regulations. As per definition, the building code is a set of local laws relating to how buildings should be designed or built, especially…

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School Ans: Office building. 2) Assume reasonable assumptions for geographic and location details…

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. AIM: To create a set of sinusoidal points and create a curve and create a surface out of the curve. INTRODUCTION: STEP-1: To open a dynamo and first to search a "Integer slider" to copy and paste 3 times as start,…

1) (a) OBSERVATIONS:     Concrete crushed and the reinforcement is exposed.    Concrete spalled beyond the reinforcement which may be a sign of Rupture.    Beam top portions look safe because of the flange advantage from slab.    The crack develops from bottom to top means rebar…

1. Differentiate Static analysis and Dynamic analysis with proper representing pictures DYNAMIC ANALYSIS: Structural dynamics s a kind of structural analysis. It covers structure's  behavior subjected to dynamic loading. To find time history, dynamic displacements and model analysis, dynamic analysis can be used.…