Aim:- To write a MATLAB program to calculate Drag force against a bicycle and study the relation between- Velocity and Drag Force  Drag co-efficient and Drag Force Objective :-  To calculate the drag force on a bicycle at varying speeds. A program to plot Velocity vs Drag force. A program to plot Drag co-efficient…

Aim:-  To solve an ordinary differential equation (ODE) and use the calculated information to animate the motion of the pendulum in MATLAB. Objective:-  To write a program to simulate the transient behavior of a simple pendulum. To create an animation of the motion of a simple pendulum using MATLAB. Theory:-…

Aim:- To study the Genetic Algorithm and to calculate the global maxima of stalagmite function using a Genetic Algorithm in MATLAB. Objective:- To study about Genetic Algorithm and Stalagmite function. To write a code in Matlab to optimize the stalagmite function and find the global maxima of the function.…

Aim:- TO simulate the forward kinematics of a 2R Robotic Arm. Objective:-  To write a program for a 2R robotic arm. To plot the animation of the end-effector position according to forward kinematic. Theory:-    Kinematics is the relationship between the position, velocities, and acceleration of the…

AIM:- To visualize P-V Diagram of Otto Cycle and to calculate thermal efficiency using MATLAB. Objective:-  To write a program to plot a P-V diagram of the Otto Cycle. To calculate Thermal Efficiency of Otto Cycle using MATLAB. Theory:- Air Standard Cycle    To carry out the analysis of the heat engine,…

Aim:- To perform a curve fitting for the given dataset and to find the best fit and perfect fit for that particular using MATLAB. Objective:- To write code to fit a linear and cubic polynomial for the Specific Heat(Cp) data. To plot the linear and cubic fit curves along with raw data points. To study the parameters…

Aim:- To write a code in MATLAB to parse the NASA Thermodynamic data file and then calculate the thermodynamic properties of various gas species. Objective:-  To write a function that extracts the 14 coefficients and calculates the enthalpy, entropy, and specific heats for all the species in the NASA thermodynamic…

AIM:- To make a Simulink Model of Door Bell using Solenoid Block. SOLENOID:- A Solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space…

  Q1. Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time…

AIM:- To solve the given questions related to forces acting on a vehicle. THEORY:- Tire Nomenclature/C The ISO Metric tire code consists of a string of letters and numbers, as follows:An optional letter (or letters) indicating the intended use or vehicle class for the tire: P: Passenger Car LT: Light Truck ST: Special…

Aim:- To simulate the given data and conditions of an EV using the ADVISOR Tool in MATLAB. Objective: 1. Using EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, To find whether the vehicle can travel for 45 km with FTP drive cycle? and To Conclude observations. 2. In the above case, try changing…

Aim:- To Calculate a Wide Open Throttle (WOT) Condition. OBJECTIVES:- To calculate the ratio of Hill-Climbing Power required by a fully loaded tata ultra truck to a Half-Loaded one. To calculate the minimum length of the flyover considering the minimum height at the summit should be 5.5 meters. To prepare a new drive cycle…

AIM:-  To perform DC Machine Characteristics. Objectives:- To write a MATLAB program to Plot the characteristic curve (Speed vs Torque) of the DC motor. To distinguish between power cables and signal cables. Also to prepare a table where these cables are used in an electric vehicle. To study the voltage levels…

Aim:- EV Drivetrain  Objective:-  To identify the types of power converter circuits employed in electric and hybrid electric vehicles. To calculate the steady-state speed of an EV with given inputs if the duty cycle is 70%. To develop a mathematical model of a DC motor using Simulink. Refer to the blog and…

Aim:-  A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.B. Comment on the armature current shoot-up from the scope results.C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the H-bridge model. Develop a 2-quadrant…

AIM :- To calculate the energy required for braking based on a specific drive cycle. To explain why electric motors cannot develop braking torque at high speed and also how electric and mechanical brakes are co-ordinated. To write a MATLAB program to plot the contour of a motor's speed, torque and efficiencies. Q.1…

Aim: To study the powertrain blockset and also comment on results by making some changes. Q1.The difference between the mapped and dynamic models of engine, motor and generator Theory: Mapped model of engine Dynamic model of engine It makes use of lookup tables and the values should be pre-defined. The values that…

Aim:- To study the overview of the Automotive life cycle.  Q1. What are the 10 Stages of the Product life cycle of the automotive industry?  The 10 stages of the product life cycle in the Automotive Industry are, Concept Sketching Styling Class-A Feasibility Check Concept Validation New Product Design Development…

Aim:- To Study an overview of Choosing a Material for a component. Q1. What are the factors to be considered while choosing a material for a component? The main factors for selecting the material are Light Weight Economic Effectiveness Recycling Safty LIGHTWEIGHT  Lightweight Material can improve fuel efficiency…

Aim:- Create the Solid CATpart from the below 2D drawings using the Boolean Operation (Add, Remove and Union Trim).    Drawing 1 ISOMETRIC VIEW  FRONT VIEW SIDE VIEW TOP VIEW SPECIFICATION TREE   Drawing 2 ISOMETRIC VIEW FRONT VIEW SIDE VIEW TOP VIEW SPECIFICATION TREE   Your Assets Filname Size…

AMI:- Create the Solid CATpart from the below 2D drawings using the Boolean Operation (Add, Remove, and Union Trim). The part models should be a replica of the 2D drawings provided.  OBJECTIVES:- Screenshots of the Fully defined Sketch with sketch solving status dialog box. Screenshots of the expanded Tree structure…

AMI:- Create the Solid CATpart from the below 2D drawings using the Boolean Operation (Add, Remove, and Union Trim). The part models should be a replica of the 2D drawings provided.  OBJECTIVES:- Screenshots of the Fully defined Sketch with sketch solving status dialog box. Screenshots of the expanded Tree structure…

AMI:- Create the Solid CATpart from the below 2D drawings using the Boolean Operation (Add, Remove, and Union Trim). The part models should be a replica of the 2D drawings provided.  OBJECTIVES:- Screenshots of the Fully defined Sketch with sketch solving status dialog box. Screenshots of the expanded Tree structure…

  Your Answers DRAWING EXERCISE 01 DRAWING EXERCISE 02 DRAWING EXERCISE 03 DRAWING EXERCISE 04 DRAWING EXERCISE 5 DRAWING EXERCISE 06 DRAWING EXERCISE 07 DRAWING EXERCISE 08 DRAWING EXERCISE 09 DRAWING EXERCISE 10     Your Assets Filname Size Action Week 6 …ge 1.zip 618.96 KB  

          Your Answers DRAWING EXERCISE 1 DRAWING EXERCISE 2 DRAWING EXERCISE 3 DRAWING EXERCISE 4 Your Assets Filname Size Action WEEK 6 …GE 2.zip 531.17 KB  

AIM:- Create the Surface CATpart from the below 2D drawings. The part models should be a replica of the 2D drawings provided.DRA Drawing 1 SKETCH WITH SKETCH SOLVING STATUS BASE BODY  OUTWARD BLOCKS  RECTANGULAR HOLE IN BODY STEPS SURFACE WORKING  BODY  RECTANGULAR HOLE IN A BODY STEPS  OUTWARD…

AIM:- Create the Surface CATpart from the below 2D drawings. The part models should be a replica of the 2D drawings provided.    Drawing 1 SKETCH WITH SKETCH SOLVING STATUS BASE  BUSH 1 BUSH HOLE 1 BUSH 2 BUSH HOLE 2 FIXING BODY SURFACE WORKING BASE  BUSH 1 BUSH 2 COUNTER BORE FIXING BODY  FILLETS…

Drawing 1 SKETCH WITH SKETCH SOLVING STATUS BASE  BUSH 1 BUSH 2   BUSH HOLE 1 BUSH HOLE 2 FIXING BUSHS SURFACE WORKING METHOD 3 BASE  BUSH 1  BUSH 2 COUNTER BORE FIXING BUSHS HOLES ON BUSH  TREE STRUCTURE  Different Views of a Component ISOMETRIC VIEW FRONT VIEW SIDE VIEW TOP VIEW BOTTOM…

AIM:- Create the Base Bracket Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the mode OBJECTIVE:-  Creation of Tooling Axis. Creation of class…

AIM:- Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the mode OBJECTIVE:-  Creation of Tooling Axis. Creation of…

AIM:- Create the Coin Holder Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Take the Thickness of the component to be 2.5…

AIM:-  To Create the BUMPER Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Take the Thickness of the component to be 3…

AIM:to create the core and cavity for the switch bezel condering the all design rules. TOOLING AXIS: IT IS THE AXIS IN WHICH THE DIRECTION CORE AND CAVITY OPEN. THIS IS THE VERY IMPORTANT FOR PRODUCTION OF PLASTIC COMPONENT. MOST OF THE DEFECT WILL DONE IMPROPER TOOLING AXIS CREATION BY THE PLASTI DESIGNER. THERE ARE SO…

                                                                            Attachment Feature Creation (Ribs & Screw Boss)…

                                                                            Attachment Feature Creation (DOG HOUSE) AIM: To Create…