Here is the code for plotting Time vs Angulardisplacement and Angularvelocity   All Inputs b=0.05(damping coefficient), g=9.81m/s2(gravity), l=1m(length of the pendulum), m=1kg(mass). close all clear all clc b = .05 %Damping coefficient g = 9.81 %Gravity(m/s2) l = 1 %Length of the pendulum(m) m = 1 %Mass of the pendulum(kg)…

  AIM :- To optimize the stalagmite function and find the global maxima of the function. Genetic Algorithm is a search based optimization technique based on the principles of  Genetics and Natural selection.It is used to find optimal or near optimal solutions to various problems which take more time to solve.…

AIM:- To write a code in Matlab to parse the NASA thrmodynamic data file and then calculate the thermodynamic properties of various gas species. Objective: 1.To write a function that extracts the 14 coefficients and calculates the enthalpy,entropy and specific heats for all the species in NASA thermodynamic data file "THERMO.dat".…

AIM (1) : - To make simulink model for a doorbell using solenoid block.   Blocks used in the simulink model : 1) Pulse generator 2) battery 3) Switch 4) Simulink - PS converter 5) PS - Simulink converter 6) Solenoid 7) Ideal translational motor sensor 8) Mechanical translational reference 9) Electrical reference 10)…

Aim:- 1) To implement control logic of a "washing machine" using stateflow as per given sequence.          2) Make a simulink chart for the 'Gear shift' logic as per given conditions. Objectives :-  1) Implement a control logic of a washing machine using stateflow as per given sequence.Create a model and operate the model…

Battery:- A Battery is a device that is able to store electrical energy in the form of chemical energy and convert that energy into electricity. Lithium ion battery :- These are the batteries that function based on the transfer of the lithium ions between a cathode and an anode. Lithium ion batteries are the batteries…

AIM :- To carry out a system level simulation of an All-Terrain vehicle and to prepare a technical report explaining the model           properties and comments on the results. Theory :- An All-terrain vehicle(ATV), also known as light utility vehicle(LUV),a quad bike or simply a quad as defined…

Aim :- To setup steady simulations in Ansys  using a mixing Tee joint , one shorter and the other longer to compare the mixing effectiveness when hot inlet temperature is 36°C and cold inlet is at 19°C. Introduction :- Computational Fluid dynamics is a branch of Fluid mechanics which uses mathematics, physics and computational…

                                                                    FLOW OVER A CYLINDER Aim :- To simulate the flow over a cylinder and to explain the phenomenon of Karman vortex street.  Objectives :- Simulate the flow with the steady and unsteady case and calculate the Strouhal number for Re = 100. Calculate the coefficient…

                                      External Flow Simulation over an Ahmed Body Aim :- 1.To describe Ahmed body and it's imporatance.            2.To explain the reason for the negative pressure…

                                                         CHT Analysis on Exhaust port Aim:- To do CHT(Conjugate Heat transfer) analysis by conducting simulation in Ansys…

                                           Surface Meshing On a Pressure Valve  Aim :-  To write a detailed report on the surface meshing on a Pressure valve and to find out the target length which gives…

                                               CFD Meshing On Turbocharger  Aim :- To perform surface mesh and volumetric mesh for the given Turbocharger model using ANSA prepocessor.  …

                                               CFD MESHING FOR BMW CAR  Aim :- To perform the surface meshing for given BMW Car model with appropraiate Target lengths for different PIDs.And to check…

                                               Surface Wrap on Automotive Assembly Aim :- To perform Surface wrap with the given target length of 3mm for the given models after clearing the geometries.…

                                                 CFD Meshing For Tesla Cyber Truck   Aim :- To check all the geometrical errors and to perform the meshing for given Tesla cyber Truck model.…

                                                  Rayleigh Taylor Instability Aim :- To perform the Rayleigh Taylor instability simulation for 2 different mesh sizes with the base mesh being 0.5mm.To …

                                                            CHT Anslysis on a Graphics card   Aim :- To perform a steady-state heat transfer analysis on a model…