AIM: MESHING THE GIVEN CAR HOOD WITH THE ABOVE-MENTIONED QUALITY CRITERIA. PROCEDURE:  * IMPORTING THE MODEL. * GEOMETRY CHECKING AND DOING GEOMETRY CLEANUP IF ANY * MID SURFACE GENERATION USING OFFSET/MID SURFACE- SKIN COMMAND. * CLEANING THE MID SURFACE SUCH AS SUPPRESSING THE CONS, DEFEATURING, AND DELETING THE…

Aim: To create mid surface for the given cad model and perform 2d meshing then convert to 3d mesh. Outline: *Importing the cad model *doing geometry check up. *rectifying errors. *mid surface generation. *meshing  *improving the quality of the mesh *applying thickness to the mesh Procedure. *Importing the cadd model into…

FOR MODEL-1 I HAVE TAKEN EXTRA 3 HRS FOR MODEL-2 I HAVE TAKEN EXTRA 2 HRS

AIM: TO check geometrical errors, mesh the surfaces for the given model (mirror)  with the given 2D quality criteria and to use tetra elements to mesh the volume and to check for the below  quality after volume meshing. PROCEDURE: STEP 1: Importing the given cad model into ANSA (file-open-selecting the model).…

work time 5 hrs

AIM:              For the given car side door, different PID for each part to be assigned and necessary connections to be applied. PROCEDURE: STEP 1: Importing the given model into ANSA using FILE-OPEN-SELECTING THE FILE options. STEP2: Assigning separate PID…

AIM:              To perform morphing operations are given cad models. PROCEDURE: STEP 1: IMPORTING Opening ANSA and importing the cad file STEP 2: ORIENT If any orient is improper then it should be corrected by selecting TOPO – FACES – ORIENT –…

                                                                     PROJECT-2 AIM:    For the given assembly, geometrical errors to be…

                                                                               …

AIM:                    To mesh the given component with the size of 5 units and to create 1D elements on the following component with the given cross-section and DOF. PROCEDURE: STEP 1: Importing the model by selecting IMPORT-IMPORT…

AIM:                    To mesh the given component with the given target element size and quality criteria and to assign thickness.   PROCEDURE: STEP 1: Importing the model by selecting IMPORT SOLVER DECK-IMPORT GEOMETRY-OPEN-SELECTING…

2D TO 3D CONVERSION OF HOUSING MODEL (MODEL-1) AIM:                 For the given model mesh has to be converted from 2D to 3D and checked for the given quality criteria. PROCEDURE: STEP 1: Importing the model into the hypermesh by selecting IMPORT…

AIM:                 To mesh the given model with the mentioned quality criteria parameters and to make connections on the components wherever specified. PROCEDURE: STEP 1: Import the model into hypermesh by selecting IMPORT SOLVER DECK-IMPORT GEOMETRY-SELECT…

    AIM:              To mesh the given model with the given quality criteria and to assign thickness. PROCEDURE: STEP 1: Import the given model into hypermesh by selecting IMPORT SOLVER DECK-IMPORT GEOMETRY-SELECT THE FILE-IMPORT. STEP 2: Create a new…

AIM:                 To mesh the given model with the given quality criteria and to assign thickness for the same. PROCEDURE: STEP 1: Importing the model into the hypermesh by selecting IMPORT SOLVER DECK-IMPORT GEOMETRY-SELECT THE MODEL-IMPORT.…

AIM:                 To design a plate with hole at the centre with the given dimension and to determine the maximum deformation and stress developed for case 1 and case 2: DEFORMATION AND STRESS RESULTS: TOTAL DEFORMATION: CASE 1: CASE 2: Deformation=PL/EA…