Modelling, Assembling and Rendering of American Chopper   OBJECTIVE              To Model the all the parts of Chopper and assembling them to create an American Chopper and render the assembled chopper to get a realistic appearance. INTRODUCTION             …

OBJECTIVE              To Model the all the parts of American Yacht and assembling them to create an fully assembled American Yacht and render it to get a realistic appearance. INTRODUCTION             …

CASING DESIGN OBJECTIVE      To create the casing using NX CAD software by sheet metal tool. INTRODUCTION     The sheet metal can be bent, drawn, cut, punched, or stretched. These processes are responsible for forming the metal into a different shape, surface, or size.…

BOX ASSEMBLY OBJECTIVE       To model the box assembly using NX software sheet metal tool. INTRODUCTION       The sheet metal can be bent, drawn, cut, punched, or stretched. These processes are responsible for forming the metal into a different shape, surface, or size.…

ODD SHAPED ENCLOSURE OBJECTIVE          To model the Odd shaped enclosure using NX software by converting solidbody to sheetmetal. INTRODUCTION       The sheet metal can be bent, drawn, cut, punched, or stretched. These processes are responsible for forming the metal into a different shape, surface, or size. Here, By using…

BRACKET OBJECTIVE       To model the Bracket using Siemens NX software by sheet metal tool. INTRODUCTION       The sheet metal can be bent, drawn, cut, punched, or stretched. These processes are responsible for forming the metal into a different shape, surface, or…

BRACKET-II OBJECTIVE      To create the Metal bracket -II using NX CAD software by sheet metal tool. INTRODUCTION     The sheet metal can be bent, drawn, cut, punched, or stretched. These processes are responsible for forming the metal into a different shape, surface, or size. Here, By using Siemens NX Software the sheet…

BENCHMARKING      Benchmarking is a way to measure business and team success by comparing a process or the organization as a whole to other internal processes or to competitors. Benchmarking helps you understand industry norms and analyze how your company stacks up. You can also compare a process within…

UNDERBODY COATING      Normally cars underbody is most prone to corrosion. Underbody Coating is a thick resilient coating applied to the underbody or chassis of an automobile. Underbody coating provides long term protection from corrosion to car’s underbody. It also protects parts like internal…

HOOD DESIGN HOOD          Hood is also called as Bonnet. It is hinged thin sheet which covers and protects the main parts of car like engine. Its main function is to direct access to the engine, battery and other crucial parts of the cars for repair and maintenance and to protect these parts from direct sunlight and dust.…

DESIGN OF FRONT FENDER Objective    To design the front fender of the car  from the given skin data and the master section provided. Aim    To design Drip mounting, A-pillar, Sill, Bumper, Cowl mounting.            Fender        It's main…

Section Modulus calculation and optimization Objective    To calculate the section modulus of designed Hood Aim Calculate the moment of inertia Calculate the Distance between the centroid (Nuetral Axis) and the extreme end of the component. Calculate the section modulus. Calculation      …

DESIGN OF ROOF Objective   To design the car roof and its bows with reinforcements and ditch area by using siemens NX cad software. Introduction An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind,…

DESIGN OF BACKDOOR Objective    To design the backdoor or tailgate of the car using siemens NX cad. Introduction    Tailgate or back door of the car is used to load the luggages or accomodate the passanger at rear seats.  Types of Backdoor  Top Mounted Bottom Mounted Side Mounted There are…

DRAFT ANALYSIS ON FAN COVER Draft Analysis When making a part that will be molded, the analysis will verify that all surfaces are favorable for being pulled from a cavity. It may also highlight or give insight to "trouble" areas. Simple parts may not need this. More complex parts that need multiple cores or slides, it…