Google drive link of assignment- https://drive.google.com/file/d/1kSbKZPw9vcO2DbinjHWTXrGVcWJy4TW5/view?usp=share_link Report in word format in attachment. Google drive link for Report- https://docs.google.com/document/d/1mjRqSQrWzD1-uRRkW9y2ThCHYKXI1D8x/edit?usp=share_link&ouid=100554624516367540643&rtpof=true&sd=true…

Google drive Link of assignment- https://drive.google.com/file/d/1WW-47VEUD1mc4yss-AZJKZwiZfewxzhA/view?usp=share_link Google Drive Link for the report-https://docs.google.com/document/d/19HMzHwp99hi2ggdfhjJtNLCyNohUVFdW/edit?usp=share_link&ouid=100554624516367540643&rtpof=true&sd=true  

Hello Sir, The Report and the MEshed FE Model is submitted in the attachment.

The File of tool test 2 is added in the attachment. Google drive link of file- https://drive.google.com/file/d/1NQ4PKCuXDVB2hrS-rvO3tqvWBGN0T-1Z/ view?usp=share_link  

both the models are shared by zip foder in the attachment.

Report and ANSA files is in the attachments.

Week 8 Challenge Aim- Understanding box Morphing technique. Introduction Morphing is a technique of converting a given shape to a different form. The given geometry can be modified at FEA stage to get a better optimized design, with the defined proportions. This technique reduces the time as the geometry can be modified…

Project 1. Aim- Mid surface extraction and 2D meshing on the instrumental Panel. Google Drive Link of assignment -https://drive.google.com/file/d/1zWtE_GZENGqz_GOTe5mqbQ6nAQ6bih_g/view?usp=share_link Procedure- Step 1- Imported the Geometry Step 2- Improved cons resolution  from mesh module- perimeter- length – 1. Step…

Project 2 Aim- Meshing on Suspension assembly. Google Drive Link of assignment - https://drive.google.com/file/d/1IjWXpeKywiRIKSBcfZyln2C-a4AhvVS6/view?usp=share_link Procedure- Step 1- Imported the Geometry Step 2- Improved cons resolution  from mesh module- perimeter- length – 1. Step 3- Set orientation from  Topo module…

Challenge 3 Aim – Creating 1D element. Google Drive Link- https://drive.google.com/file/d/1SaqZoDXSJvM8wYM6BpkoSDcy9nzLs4y1/view?usp=share_link Procedure- Step 1 – Import the CAD model. Measured the thickness of bracket from geometry-dimensioning-selected the two nodes. Step 2 -Extracted the mid surface of…

Week 6 Challenge Aim- To perform meshing on automobile hood. Google drive link-https://drive.google.com/file/d/10LcRgI3K2FDk5zmJ9TWI53DtcSzOBwdB/view?usp=share_link Procedure- Step 1- Import the Geometry. Step 2 – Checking for the number of components. Fig 1 – CAD of  hood model Step 3 – Deleting…

Week 9 Aim- Creating 1D connections for the assembly. Google drive Link-https://drive.google.com/file/d/147Us5JRiPIqOnZSho9ghGvqIL6s8Bt1/view?usp=share_link Step 1- Import the Geometry. Step 2 – Checking for the number of components. Fig 1 – CAD of  Assembly Step 3 - Added the quality criteria as per the…

Week 8 Aim- To Perform 3D tetra meshing by using volume mesh and conventional 2D to 3D conversion method. Question 1. Google drive Link -https://drive.google.com/file/d/1Giy6QOu0JfaGG5GzwwMBaGMgOSOkAAu1/view?usp=share_link Step 1- Import the CAD geometry. Step 2- Checking for the number of components. Fig 1 - Imported…

  Project 1-Meshing of Rear Wheel Holder challenge     Aim- Meshing of the Rear Wheel Holder Hm file link-https://drive.google.com/file/d/1V21rFKAVyH1LX_tpBXb6W0g6NQy_H3Z/view?usp=share_link Step 1 -  Imported the file. Fig- imported file   Step 2 – searching for any missing surface and filling…

  Project-2-Meshing of Door Inner Panel Challenge   Aim-Meshing of Door inner Panel   Google drive Link- https://drive.google.com/file/d/1ay0GBTFVnw19gXqWruG-OMrNE4ny6xnG/view?usp=drive_link   Note – Was not able to upload the file as file size is more than 20 MB hence uploaded the google…

I have Uploaded the report and set up in zip file also in google drive link mentioned. I was not able to upolad the report. please do consider this   https://drive.google.com/file/d/1S4ncmuHiJg7mqZjFztSFholhJLO8ymeE/view?usp=drive_link