Week 6 - Creating connection for Rear door

I have Uploaded the report and set up in zip file also in google drive link mentioned. I was not able to upolad the report. please do consider this   https://drive.google.com/file/d/1S4ncmuHiJg7mqZjFztSFholhJLO8ymeE/view?usp=drive_link  

  Project-2-Meshing of Door Inner Panel Challenge   Aim-Meshing of Door inner Panel   Google drive Link- https://drive.google.com/file/d/1ay0GBTFVnw19gXqWruG-OMrNE4ny6xnG/view?usp=drive_link   Note – Was not able to upload the file as file size is more than 20 MB hence uploaded the google…

  Project 1-Meshing of Rear Wheel Holder challenge     Aim- Meshing of the Rear Wheel Holder Hm file link-https://drive.google.com/file/d/1V21rFKAVyH1LX_tpBXb6W0g6NQy_H3Z/view?usp=share_link Step 1 -  Imported the file. Fig- imported file   Step 2 – searching for any missing surface and filling…

Week 8 Aim- To Perform 3D tetra meshing by using volume mesh and conventional 2D to 3D conversion method. Question 1. Google drive Link -https://drive.google.com/file/d/1Giy6QOu0JfaGG5GzwwMBaGMgOSOkAAu1/view?usp=share_link Step 1- Import the CAD geometry. Step 2- Checking for the number of components. Fig 1 - Imported…

Week 9 Aim- Creating 1D connections for the assembly. Google drive Link-https://drive.google.com/file/d/147Us5JRiPIqOnZSho9ghGvqIL6s8Bt1/view?usp=share_link Step 1- Import the Geometry. Step 2 – Checking for the number of components. Fig 1 – CAD of  Assembly Step 3 - Added the quality criteria as per the…

Week 6 Challenge Aim- To perform meshing on automobile hood. Google drive link-https://drive.google.com/file/d/10LcRgI3K2FDk5zmJ9TWI53DtcSzOBwdB/view?usp=share_link Procedure- Step 1- Import the Geometry. Step 2 – Checking for the number of components. Fig 1 – CAD of  hood model Step 3 – Deleting…

Challenge 3 Aim – Creating 1D element. Google Drive Link- https://drive.google.com/file/d/1SaqZoDXSJvM8wYM6BpkoSDcy9nzLs4y1/view?usp=share_link Procedure- Step 1 – Import the CAD model. Measured the thickness of bracket from geometry-dimensioning-selected the two nodes. Step 2 -Extracted the mid surface of…

Project 2 Aim- Meshing on Suspension assembly. Google Drive Link of assignment - https://drive.google.com/file/d/1IjWXpeKywiRIKSBcfZyln2C-a4AhvVS6/view?usp=share_link Procedure- Step 1- Imported the Geometry Step 2- Improved cons resolution  from mesh module- perimeter- length – 1. Step 3- Set orientation from  Topo module…

Project 1. Aim- Mid surface extraction and 2D meshing on the instrumental Panel. Google Drive Link of assignment -https://drive.google.com/file/d/1zWtE_GZENGqz_GOTe5mqbQ6nAQ6bih_g/view?usp=share_link Procedure- Step 1- Imported the Geometry Step 2- Improved cons resolution  from mesh module- perimeter- length – 1. Step…

Week 8 Challenge Aim- Understanding box Morphing technique. Introduction Morphing is a technique of converting a given shape to a different form. The given geometry can be modified at FEA stage to get a better optimized design, with the defined proportions. This technique reduces the time as the geometry can be modified…

Report and ANSA files is in the attachments.

both the models are shared by zip foder in the attachment.

The File of tool test 2 is added in the attachment. Google drive link of file- https://drive.google.com/file/d/1NQ4PKCuXDVB2hrS-rvO3tqvWBGN0T-1Z/ view?usp=share_link  

Hello Sir, The Report and the MEshed FE Model is submitted in the attachment.

Google drive Link of assignment- https://drive.google.com/file/d/1WW-47VEUD1mc4yss-AZJKZwiZfewxzhA/view?usp=share_link Google Drive Link for the report-https://docs.google.com/document/d/19HMzHwp99hi2ggdfhjJtNLCyNohUVFdW/edit?usp=share_link&ouid=100554624516367540643&rtpof=true&sd=true  

Google drive link of assignment- https://drive.google.com/file/d/1kSbKZPw9vcO2DbinjHWTXrGVcWJy4TW5/view?usp=share_link Report in word format in attachment. Google drive link for Report- https://docs.google.com/document/d/1mjRqSQrWzD1-uRRkW9y2ThCHYKXI1D8x/edit?usp=share_link&ouid=100554624516367540643&rtpof=true&sd=true…