OBJECTIVE :   In this project 1 of Embedded C essentials I write a C program to Create a user defined function to implement the user interface for working with mathematical set theory find the union and intersection of elements of two sets by using linked list. What is linked list ? A linked list is a data structure…

  Overview of the Project:  Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display. Goals: Implement a system on simulator for Controlling the DC motor using L293 motor driver. Displaying the running status…

AIM : In this project we have to write a Code in Microchipp studio  to implement it for measuring the distance of an object using ultra sonic distance sensor HC-SR04. To measure distance of an object using an HC-SR04 ultrasonic sensor, we need to use the following steps: Connect the trigger of the pin of the sensor…

AIM In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on LCD screen.   Key Highlights…

project link: https://www.tinkercad.com/things/aA24ehScEWL   objective of the Project:  In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR84) and also smoothen the sensor data using moving average filter”. Goals: Measuring the distance…

INTRODUCTION: A Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested…

Project 2 - Implement the Code for controlling the retraction and extension of Airplane’s landing gear   AIM:   Implement the Code for controlling the retraction and extension of Airplane’s landing gear.   In this project, controlling the retraction and extension of Airplane’s landing gear…

  Make a Simulink model of Doorbell using solenoid block with the following details:   In the above arrangement, when the switch is closed the electromagnet receives electrical power from the battery and pulls the metal arm to hit the bell producing sound.  Create a situation where the switch is…

Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then rinsing…

 OBJECTIVE: To study the model Baja-all-terrain-vehicle-atv-model to perform system-level simulation of ATV and to prepare                      a technical report explaining the model properties and comment on the results.    SOFTWARE :  Matlab,…

Question  1:   Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them Load a .c file :                                …

1.Prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells.Give your detailed explanation on it   Answer:   Battery: is a element which convert stored chemical energy to the useful electrical energy.  …

CODE:   #include <stdio.h>#include <stdlib.h> // Queue nodestruct QueueNode { int data; struct QueueNode* next;}; // Queue data structurestruct Queue { struct QueueNode *front, *rear;}; // Create a new nodestruct QueueNode* createNode(int data) { struct QueueNode* newNode = (struct QueueNode*)malloc(sizeof(struct…

https://coral.ai/docs/dev-board/datasheet/   Integrate following sensors to the Dev Board: GPS IMU Sensor Achieve the following task with the help of these sensors: The microcontroller should automatically detect sensor’s (GPS + IMU) connection and disconnection and print suitable string over the terminal (Serial…

Build an object-oriented library which can be used to track automobile maintenance. There can be different car types such as petrol, diesel, gas, electric etc., This library should be able to support at least three of the car types. Maintenance tasks include activities like oil change or replace oil filter, replace air…

AIM: The project is to design a battery pack with a capacity of 18 kWh using ANR26650M1-B cells. The battery pack will be arranged in a 12S6P configuration, with a total of 72 cells.   For the battery pack, we will assume the following: Cell: ANR26650M1-BBattery pack capacity: 18 kWhNumber of cells: 72 (arranged…

Simulate the 3 test cases from the harness dashboard and write a detailed report on the results:To simulate the test cases, you can follow the instructions in the file exchange link provided and use the BMS model to run the simulations. The test cases are designed to evaluate the BMS performance under different conditions,…

AIM: - To study the Thermal modeling of the battery pack with the help of MATLAB and SIMULINK. OBJECTIVES: -                     1)For a 10-cell series lithium-ion battery model, simulate the thermal effects and compare life cycle performance…

Aim: To use the ADVISOR tool for simulation.  ADVISOR is a simulation tool developed by the National Renewable Energy Laboratory (NREL) for modeling and simulating advanced vehicle powertrains. It is typically used in Matlab/Simulink environment, and requires various input files such as vehicle data files (.in),…

AIM: The project is to design a battery pack with a capacity of 18 kWh using ANR26650M1-B cells. The battery pack will be arranged in a 12S6P configuration, with a total of 72 cells.   For the battery pack, we will assume the following: Cell: ANR26650M1-BBattery pack capacity: 18 kWhNumber of cells: 72 (arranged in a 12S6P…

AIM: The project is to design a battery pack with a capacity of 18 kWh using ANR26650M1-B cells. The battery pack will be arranged in a 12S6P configuration, with a total of 72 cells.   For the battery pack, we will assume the following: Cell: ANR26650M1-BBattery pack capacity: 18 kWhNumber of cells: 72 (arranged in a 12S6P…

1. What is the difference between the mapped and dynamic models of the engine, motor, and generator? How can you change the model type?  Ans: powertrain block set provides two types of combustion engine models: mapped and dynamic. Mapped engine: Mapped models and dynamic models are two approaches to modeling an engine,…

 1. Which types of power converter circuits are employed in an electric and hybrid electric vehicle?    Electric and hybrid electric vehicles employ various types of power converter circuits to efficiently manage power flow between different parts of the vehicle's electrical system. Some common types…

1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.   A. The MATLAB demo model named 'Speed control of a DC motor using BJT H-bridge' is a simulation model that demonstrates the speed control of a DC motor using a BJT H-bridge circuit. The model consists of a DC motor,…

        Project-1: Powertrain for aircraft in runways                                   Aircraft Towing and Ground Handling BY SANKET AWASTHY Aim: To develop an efficient and safe aircraft towing and ground handling…

AIM: - To study the Thermal modeling of the battery pack with the help of MATLAB and SIMULINK. OBJECTIVES: -                     1)For a 10-cell series lithium-ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB.this will be based…

  For a defined driving cycle, calculate the energy required for braking.Braking energy is the kinetic energy that needs to be dissipated to slow down or stop a moving vehicle. It can be calculated using the formula: Braking Energy = (1/2)mv^2, where m is the total mass of the vehicle (including payload) in kg, and…

AIM: - To study the Thermal modeling of the battery pack with the help of MATLAB and SIMULINK. OBJECTIVES: -                     1)For a 10-cell series lithium-ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB.this will be based…

  Aim :-  Create a MATLAB model of electric car which uses lithium ion battery and induction motor. Choose suitable blocks from Powertrain block set. Prepare a report about your model including following:   Objectives:        System-level configurations: The first objective is to create…

AIM: - To study the Thermal modeling of the battery pack with the help of MATLAB and SIMULINK. OBJECTIVES: -                     1)For a 10-cell series lithium-ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB.this will be based…

Develop the Simulink model based on the given descriptions for the below challenges and also create SLDD file and link the same to the model. Perform the complete V and V workflow for the obtained models.   Wiper control system Develop Simulink/state flow model for wiper control system based on the given conditions.…

Q.Develop the Simulink model based on the given requirements and also create SLDD file and link the same to the model. Perform the complete V and V workflow for the obtained model   Development of TFT Cluster Speedometer Software Component   Cluster Instrument receives the signals from other ECU via CAN bus interface.…