Fender: Fender is a front outer side member of a car which covers the wheel side. Fender purpose is to prevent sand, mud, rocks, liquids and other particles. Types of Fender: Full front fender: If the fender covers the tire, the wheel well surrounding the tire, and it is not directly visible from above the car body. It…

INTRODUCTION : An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements. Because the earliest automobiles were designed in an era of horse-drawn carriage , early automobile…

                                                                              CAR BACK DOOR DESIGN Aim: To design…

Title of the Project:  Design and model the Coin holder Plastic component through the given Class-A surface data, using Catia V5.     Objective:  To create the Coin holder of plastic component through Class A surface,by creating tooling axis and perform draft analysis for the component using catia V5.…

Aim- To create an out featured rib on the centre console coin holder. Procedure- Firstly open the coin holder using the open command Rib- To create a rib first extract the base surface of the coin holder. Create a positioning sketch draw a line , constraint it and define it as an output feature. Extrude the output line…

AIM: Creation of Door Arm rest and add thickness to it. OBJECTIVES: Create Class B and C surfaces through Class A surface. Create tooling axis using bisecting method. Perform draft analysis. PROCEDURE: The procedure is divided into two parts first creating the tooling axis then performing the draft analysis. Creating tooling…

CREW BOSS AND DOG HOUSE DESIGN ON COIN HOLDER AIM- Create the screw boss and dog house for the centre console coin holder considering the design rules mentioned in the video. General Rules for Screw bosses. Draft of 0.5 degree on walls of boss Thickness is 40% of the nominal wall at the base. Height to diameter ration-3:1…

 DEVELOPMENT OF A DOOR TRIM PANNEL AIM: To Create a CAD model considering the following inputs as like in OEM and tier1 companies Class A surface Nominal thickness with reference of Master Sections Attachment strategy INPUT: Class A Surface Master Sections STEPS INVOLVED: TOOLING AXIS SURFACE THICKNESS ATTACHMENT…

PARAMETRIC STRUCTURE WITH PUBLICATION COMMAND:

1. TOOLING DIRECTION: The Tooling Direction is basically the direction that the mold pulls apart. The mold is built in two separate pieces, basically. You have a Cavity side and you have the Core side. The Core pulls apart from the Cavity and that's the Dyeline or the Tooling Direction.   2.    …

1. Body In White (BIW): The stage in automobile design or automotive manufacturing in which the car body sheet metal components are been assembled by welding and by other joining process. BIW parts are mainly catagorised as below:   2. BIW Nomenclature:   3. Fixture: A fixture is a device which holds the…

1. Project execution activity: Project activities are those basically are being processed or being practiced in general project of BIW begins. Project activities are task from start to end of project. There are various step involved in project. Below fig. show flow chart of project activities. RFQ: In BIW fixture design…

1. Design Methodology: Design methodology is nothinh but the steps followed during the concept design stages of fixture design. Design Methodology---> -- Purchase orser -- Input from customer -- Persentage completion criteria -- Design output   2. Input from customer: - Functional requirements - Prefered standard…

DESIGN OF FIX PIN AND RETRACTABLE PIN UNIT The fix pin and the retractable pin units are hole constraining fixture for car panels. FIXED PIN UNIT Fixed pin unit is a unit designed to locate the car panel using pins. The parts of fixed pin are: Pin Pin retainer Shim/Spacer Block Blade or Adapter plate Riser Fundametals…