MODELING, ASSEMBLY, PHOTOREALISTIC RENDER OF AN AMERICAN CHOPPER OBJECTIVE Main objective of this project is to Create a photo-realistic Conceptual model of an American Chopper using solid works.By creating part drawings, converting them to 3D models, assembling the created parts and finally giving it a photorealistic…

    MODELING, ASSEMBLY, PHOTOREALISTIC RENDER OF AN SUN SEEKER PREDATOR YACHT   OBJECTIVE Main objective of this project is to Create a photo-realistic Conceptual model of an sunseeker predator yacht using solid works.By creating part drawings, converting them to 3D models, assembling the created parts and…

Benchmarking Benchmarking in the automobile industry Benchmarking involves a structured comparison between similar products, services or processes on some dimensions of performance. For example it can be used to compare the availability and delivery of features in a product and in this form often provides the basis of…

UNDER-BODY COATING Automotive Underbody Coatings Underside of vehicles serves as an intermediate between metal components of a vehicle and outer environment. Underbody of vehicles is prone to damages due to harsh environmental conditions. Coatings are applied to the underside of vehicles to protect them against factors…

OBJECTIVE To design Hood Outer and Inner panel along with suitable reinforcements by following the Master Section INRODUCTION Hood A car hood, also referred to as a bonnet in some other countries, is the hinged cover that rests over the engine of a front-engine vehicle. Its purpose is to provide access to the engine for…

AIM To increase the section modulus of a given hood by necessary changes INTRODUCTION  Section modulus is a geometric property for a given cross-section used in the design of beams or flexural members. Other geometric properties used in design include area for tension and shear, radius of gyration for compression,…

FRONT FENDER DESIGN INTRODUCTION FENDER Its primary purpose is to prevent sand, mud, rocks, liquids, and other road spray from being thrown into the air by the rotating tire. Fenders are typically rigid and can be damaged by contact with the road surface.Sticky materials, such as mud, may adhere to the smooth…

DESIGN OF ROOF AND CURVATURE ANALYSIS Objective:   To design the Automotive Roof based on the given styling surface and to analyze the prepared model to check the manufacturability and the feasibility of the design. Introduction:- The Roof of a car is the component which encloses the passenger compartment from the top.…

DESIGN OF BACK DOOR Aim :         To develop the car Backdoor(Tail gate) with the reference of given skin data as per engineering standared by using NX12 Back Door :     The Back door is typically hinged, but sometimes attached by other mechanisms such as tracks, in front of an opening…

Casing Design Objective:-     To design a Sheet Metal casing design using Siemens NX Sheet metal application. Introduction:- SIEMENS NX:- NX formerly known as "unigraphics", is an advanced high-end CAD/CAM/CAE, which has been owned since 2007 by Siemens PLM Software. SHEET METAL DESIGN:- NX Sheet Metal Design…

Objective:-     To design a Sheet Metal Box Assembly using Siemens NX Sheet metal application. Introduction:- SIEMENS NX:- NX formerly known as "unigraphics", is an advanced high-end CAD/CAM/CAE, which has been owned since 2007 by Siemens PLM Software. SHEET METAL DESIGN:- NX Sheet Metal Design provides…

Objective:-     To design a Odd Shaped Enclosure using Siemens NX Sheet metal application. Introduction:- SIEMENS NX:- NX formerly known as "unigraphics", is an advanced high-end CAD/CAM/CAE, which has been owned since 2007 by Siemens PLM Software. SHEET METAL DESIGN:- NX Sheet Metal Design provides…

DESIGN OF BRACKET COMPONENT USING NX SHEET METAL OBJECTIVE:               To design and model the sheet metal bracket in Siemens NX cad sheetmetal software  INTODUCTION:- SIEMENS NX:- NX formerly known as "unigraphics", is an advanced high-end CAD/CAM/CAE, which has been owned…

OBJECTIVE:- The objective of the project is to design a sheet metal Bracket using sheet metal application in Siemens NX along with a detailed drawing sheet. INTRODUCTION:- Sheet metal is a metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in metalworking,…

OBJECTIVEVE :-  To Draft Analysis on fan cover using Catia V5 Software with suitable Tooling Axis DRAFT ANALYSIS :- Drafts are defined on molded parts to make them easier to remove from molds. There are two ways of determining the objects to draft: either by explicitly selecting the object or by selecting the…

Objective:- Objective of this challenge is to do a Draft analysis of a BASE BRACKET using CATIA Software. And also create Class A surface, Class B surface and Class C surface and Solid Pattern for manufacturing. Draft Analysis: Draft analysis helps to detect if your drafted part is easily removable from the mold (in…

Objective:- Objective of this challenge is to do a Draft analysis of a BASE BRACKET using CATIA Software. And also create Class A surface, Class B surface and Class C surface and Solid Pattern for manufacturing. Draft Analysis: Draft analysis helps to detect if your drafted part is easily removable from the mold (in…