AIM: We have 2 problems to implement in Simulink stateflow to do: Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking…

AIM: To carry out the system level simulation of All-Terrain vehicle ( Baja-All-Terrain-Vehicle-ATV model) and to prepare a technical report on it. INTRODUCTION:   ATV means All-Terrain Vechicle designed to travel on all types of ground including rough ground. ATV is defined as vehicle with a straddle seating position,…

AIM :  Using ADVISOR tool in MATLAB simulate the gradeability and drive cycle. OBJECTIVE : 1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions. Check the vehicle if it can travel for 45 km with FTP drive cycle. 2.   For the same case 1, by changing the battery…

OBJECTIVES : 1. To find the difference between mapped and dynamic model of engine,motor and generator and to change the model type. 2. To find out how a model calculate miles per gallon and to understand the factors considered for model fuel flow. 3. To run the HEV reference application with WOT drive cycle by changing…

AIM : To understand the Electric Vehicle Drivetrain. OBJECTIVES : 1. To understand the different types of power converter circuits employed in electric and hybrid electric vehicle.  2. To find the steady speed from the Electric Vehicle's powertrain data given . 3. To understand the author perspective on Induction…

AIM : To control the DC motor using various power electronics. OBJECTIVE :  1. To run MATLAB demo ‘Speed control of a DC motor using BJT H-bridge’ and change the model such that armature current doesn’t shoot up when motor changes direction from forward to reverse. 2. To compare The Four-Quadrant…

AIM :  1. To calculate the energy required for braking for a defined driving cycle. 2. To explain about the reason why electric motor can’t develop braking torque at high speed similar to starting? How electric and mechanical brakes are coordinated?  3. To make a MATLAB program which plots contour of given…

AIM : To design an electric powertrain for aircraft in runways and list out the theoretical information about aircrafts  OBJECTIVE :  1. To search and list out the total weight of various types of aircrafts.   2. To find difference between ground speed and air speed.  3. To find out why it is not…

AIM : To design an Electric Vehicle with a DC motor   INTRODUCTION :  An electric vehicle (EV) is one that operates on an electric motor, instead of an internal-combustion engine that generates      power by burning a mix of fuel and gases. Electric vehicles have low running costs as they have…

OBJECTIVE : To create a Electric Rickshaw matlab model CONDITIONS : The follwing are the different conditions given for modelling of Electric Rickshaw i. Rear wheels should be driven by PM brushed type motor ii. Assume efficiency points of motor controller and motor iii. Make an excel sheet of all input and assumed data …

AIM : To model an Electric car with Lithium-ion battery. THEORY :  An electric vehicle (EV) is one that operates on an electric motor, instead of an internal-combustion engine that generates power by burning a mix of fuel and gases. Electric vehicles have low running costs as they have less moving parts for maintaining…

AIM: To understand different batteries - chemistry OBJECTIVE:  1.To prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells. 2.To compare the differences between each type of Li+ion batteries based on their characteristics.…

AIM: To explain about the mechanical design of battery pack OBJECTIVE: 1. To explain about ANR26650M1-B battery pack mechanical design SOLUTION: 1. To explain about ANR26650M1-B battery pack mechanical design Ans. ANR26650M1-B  is an Nanophosphate High Power Lithium Ion Cell. High-performance Nanophosphate…

AIM: To estimate the State Of Charge OBJECTIVE: 1. To simulate the 3 test cases from harness dashboard and to write a detailed report on the results. 2. To explain about coulomb counting and refer the model to explain how BMS implements coulomb counting for SOC estimation. https://in.mathworks.com/matlabcentral/fileexchange/72865-design-and-test-lithium-ion-battery-management-algorithms…

AIM: To simulate 10cell series Lithium Ion battery model and to analyze thermal effects, life cycle performance at various temperatures, charge - discharge rates using MATLAB-SIMULINK.   PROCEDURE: The following figure shows simulink model of 10 cells series Lithium-Ion battery model using an AC source with cyclic…

AIM: TO make the model for Vehicle Direction Detection OBJECTIVE: 1. To develop Vehicle Direction Detection feature as per the Requirement Document using MATLAB Simulink. 2. Follow all the MBD related processes: Requirement Tagging & Traceability, SLDD creation, Configuration Parameter changes, Model Advisor check…

AIM: To develop a single feature of Traffic Jam Assistant algorithm using MATLAB & SIMULINK. OBJECTIVE: 1. Model development as per MBD guidelines. 2. Creation of Simulink Data Dictionary (SLDD) file 3. Code Generation using Embedded Coder 4. Generate Model Advisor Report INTRODUCTION: Traffic Jam Assistant is one…

AIM: To develop one specific requirement of Highway Assistant – Lane Changing Assistant algorithm. OBJECTIVE:  This model must be developed in MATLAB Simulink per MBD guidelines. Code Generation Profile must be Autosar Coder. Simulink Data Dictionary must be created for the model & must be linked to…