Challenge

Week 11 - Final project

PPrakash Shukla25 Nov 2022

Aim: To Creation of CAD model considering Class A surface, Nominal thickness and Attachment strategy.

Objective:

To Creation of CAD model considering Class A surface, Nominal thickness and Attachment strategy.

Create thickened part using master section for reference

Create the mounting features as per design guidelines in the industry and with master sections

Apply material details

Draft analysis & Tooling analysis

Introduction:

10 Stages of Product life cycle of automotive Industry are

1. Concept sketch

2. Styling class A

3. Feasibility check

4. Concept validation

5. New Product Design

6. Product Development

7. Proto Build

8. Design Validation

9. Pilot Production

10. Mass production

4. New Product Development CAD: This is the stage where the major work of product design, by taking inputs from the concept sketch to validate the product will go to design using design software such as Nx, catia, solidworks, solid edge etc. IN this stage through design all the surfaces are divided into sub parts from the class A surface and Ensuring product should be workable. Making the 3D model and 2D drawings for development. Here product design is going to complete 100%.

LOWER SUBSTRATE