% program to simulate forward kinemattic of a 2R Robotic Arm clear all close all clc % Input the length of Both the Links l1= 1; l2=0.3; % Input of a counter variable ct=1; % Input 15 values of Both the Angles that the links are making with the X-axis phi1= linspace(0,90,15); phi2= linspace(0,90,15); % starting a nested…

% To Plot a P-V Diagram and find the Efficiency of the Otto Cycle clear all close all clc %Inputs of Constants gamma= 1.4; p1=101325; % Initial Pressure t1=500; % Initial Temperature t3= 2300; % Maximum Temperature % Input of Engine parameters bore= 0.1; stroke= 0.1; con_rod= 0.15; cr= 12; % Calculating the Swept Volume…

OBJECTIVE: Write a program to Simulate the transient behaviour of a Simple pendulum and create an Animation of it.   THEORY: A Simple pendulum is an example of a Damped Simple Harmonic Motion. In this case, the motion of the Oscillator decreases with time and ultimately rest. This is called Damped motion. The motion…

Aim: To optimise the stalagmite function and find the global maxima of the function. THEORY: Genetic Algoritm(GA) is a search based optimization technique based on concepts of evolutionary biology (Darwin’s theory of evolution) to find the global minima for optimization a problem. It is used to find…

 Project 1- Parsing NASA Thermodynamic data AIM: Write a code to extract all the co-efficients from the data file and Calculate the Specific Heat, Entropy and Enthalpy of all the different species.OBJECTIVE: To Calculate Molecular Weight of the different species given and display in command windowPlot the…

AIM:  Create a Rankine Cycle Simuator using MATLAB. OBJECTIVES: Write a code to Calculate the state points in Rankine Cycle based on the user inputs. plot the T-S and H_S diagram  Explain the working of the Rankine Cycle THEORY: The Rankine cycle is an idealized thermodynamic cycle that converts heat into mechanical…

OBJECTIVE:   To set up steady-state simulations to compare the mixing effectiveness when the hot inlet temperature is 360C & the  Cold inlet is 190C.  Using the k-epsilon and k-omega SST model for the first case and based on our judgment we will use the more suitable model for further cases. Understand…

AIM: To Simulate the flow over a cylinder and explain the phenomenon of Karman vortex street. OBJECTIVE:  Simulate the flow with the steady and unsteady case and calculate the Strouhal Number for Re= 100.  Calculate the coefficient of drag and lift over a cylinder by setting the Reynolds number to 10,100,1000,10000…

AIM:   External flow simulation over an Ahmed body. OBJECTIVES: Describe Ahmed's body and its importance. Explain the reason for the negative pressure in the wake region. Explain the significance of the point of separation. Run the simulation for the velocity of 25 m/sec with the default air properties in…

AIM: To analyze Conjugate Heat transfer through an Exhaust Manifold. OBJECTIVES:  Discuss the importance of Conjugate Heat Transfer. Simulate the Exhaust port model in fluent while maintaining the proper Y+ value according to the turbulence model. Calculate the wall/surface heat transfer coefficient on the internal…

AIM: To perform the Rayleigh Taylor CFD simulation and understand the phenomena. OBJECTIVE: To mention some practical CFD models that have been based on the mathematical analysis of Rayleigh Taylor waves and explain how these mathematical models have been adapted for CFD calculations. To perform the Rayleigh Taylor…

AIM :- Conjugate heat transfer analysis on a graphics card. OBJECTIVE:-  Run the simulation by varying the velocity from 1m/sec to 5m/sec for at least 3 velocities and discuss the results. Find out the maximum temperature and heat transfer coefficient attained by the processor. Prove that the simulation has achieved…

Aim:- To perform analysis on cyclone separator and calculate the separation efficiency and pressure drop.   Objective:- To write a few words about any four empirical models used to calculate the cyclone separator efficiency.  To perform an analysis on a given cyclone separator model by varying the particle…

AIM: To perform a parametric study on the gate valve simulation.   OBJECTIVE: The aim of this project is to carry out a parametric study on the gate valve by setting the opening from 10% to 80% with the objective to: Obtain the mass flow rates at the outlet for each design point Calculate the flow coefficient…