aim In Engineering, ODE is used to describe the transient behavior of a system.   there are hundreds of ODEs that describe key phenomena and if you have the ability to solve these equations then you will be able to simulate any of theses systems.   function function [dtheta_dt] = ODE_func(t,theta,b,m,l,g); theta1 = theta(1)…

Aim  The main aim is to optimize the Stalagmite function and to find the global maxima of the function by clearly explaining the concept of genetic algorithm and plotting the graph for the three studies i.e. unbounded inputs, bounded inputs, and bounded inputs with modified population size. Stalagmites: A Stalagmite…

AIM       To write a function that extracts the 14 co-efficients and to calculate the enthalpy, entropy and specific heats for all the species in the given NASA data file. And to calculate the molecular weight of each species and display it in the command window. And to plot the Cp, Enthalpy and…

AIM 1.Prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells.Give your detailed explanation on it 2.Compare the differences between each type of Li+ion batteries based on their characteristics   Lithium-Ion Battery…

  STATE OF CHARGE ESTIMATION OBJECTIVE:      By using the given lithium ion battery management project…  OBJECTIVE: The main objective of this challenge is to understand how the BMS (Battery Management System) will work and how to simulate the BMS model in Simulink, understanding the results…

AIM:        Prepare a detailed battery pack drawing along with its enclosure. State your assumptionsHint - Battery pack capacity: 18 kWh, Cell: ANR26650M1-B INTRODUCTION:   As electric vehicles are increasing in the market is gradually increasing, there is considerable growth in the production…

AIM; Obtain the transfer function of a mass spring damper system and use it in the model. Add a PID controller to adjust the force on mass so that its position follows a reference signal. given data; Take m = 3.6; %kg k = 400; %N/m c = 100; %Ns/m solution;   transfer function of a mass spring damper…

AIM:  The development of a conventional vehicle's forward energy-based fuel consumption model using Matlab and Simulink. To compute the fuel economy numbers for the given desired vehicle model in kmpl on the two different drive cycle types are UDDS and HWFET. By understanding the vehicle operation points…

AIM: 1) Load the Project2 folder as the Current Folder in Matlab.2) Run the “Project2_InitFile.m” Matlab script.3) Copy the Conventional vehicle Simulink model created for Project 1 in this folder. Figure 1: P1 Hybrid ArchitectureHybrid Drives Development4) Modify this model into a hybrid vehicle model. The…

QUESTION 1     QUESTION 2  

ANSWER: BASE BRACKET DESIGN AIM:  To create the Base Bracket Plastic component through the given Class-A surface by creating a tooling axis meeting the requirements of the draft angle and to perform the Draft Analysis on the solid model at the end. Given Class A surface   TOOLING AXIS:       Tooling…

Switch Bezel Design  1. Introduction Switch Bezels in car are parts which contains switches and controls for different functions like Window control, Door lock/Unlock,Media and Temperature controls. Acrylonitrile Butadiene Styrene(ABS) is used in switch bezel.which is scratch-resistant and wear-resistant.…

Class A Surface is Visible surface and aesthetic look. Surface with textures. Surfaces provided by customer(OEM). Don't have any features like(rib, snap, bosses, etc) on class A surface. Class A surface is made from scanned data with different software like alias etc. Surfaces which are having CURVATURE CONTINUITY IS CALLED…

AIM:- To create the rib and screw boss for the door handle considering the design rules for the rib creation and screw boss creation and then perform the draft analysis for class A and final cmponent. Objectives:- Creating a tooling axis using bisecting method. Performing draft analysis for Class A and final component.…

AIM  To Create the Dog House for the Door Trim considering the design rules through the given Class-A surface. Objective: Create the Tooling axis  Design the class-B and class-C surfaces and join them. Use the Close Surface feature to make a solid body from the surface.  Design the required…

   Week 11 - Project - A pillar Design with Master Section   Aim :        To create the A Pillar Design with the master section given as the intersection sketch with the Class A surface and create the tooling axis and perform the Draft analysis for the final solid part. Objective : Create…