Menu
Rohith Kumar
15 Projects
Project on Concrete Mix Design for various grades of Concrete
design mix for M35 grade with fly ash Cement used=OPC 43 grade Grade of concrete = M35 Maximum nominal size of aggregate = 20mm Minimum cement content = 320 kg/m3 (from table 5 IS 456 2000 according to exposure condition) Maximum w/c ratio = 0.45(from table 5 of IS 456 2000 according to exposure condition) Workability…
23 Jul 2021 11:39 AM IST
Creation of geometries by Coordinate system methods using AutoCad
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
24 Aug 2021 05:19 AM IST
Creating a Floor plan, Footing detail and Isometric view using AutoCad
1. Aim To draw the footing using auto CAD Procedure used line command and copy and move command to draw the footing with correct dimensions and angles. 2. Aim To draw the isolated footing using auto CAD Procedure used line command and copy and move command to draw the footing…
29 Aug 2021 12:28 PM IST
Drafting of various geometries using Chamfer, Fillet tool in AutoCad
1. Aim and Introduction To draw the given structure using autoCADD software. it allows the user to draw the structure of a building like plan, section etc. procedure to draw the line with specific dimension use line command in the home >draw>line or type L in the command box to get the line tool. to draw the circle…
12 Sep 2021 05:45 AM IST
Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad
1.AIM AND INTRODUCTION To draw the outline plan of a residential building consisting of bedrooms, living, kitchen,parking,porche etc. using autoCADD. PROCEDURE first step while starting a diagram use command UNITS to change the units like feet,inches,milimeters etc from one another. then draw the border line of a plan…
15 Sep 2021 02:27 PM IST
Creation of Column Schedule and Drawing Template using AutoCad
Q 1. AIM AND INTRODUCTION TO DRAW THE COLUMN SCHEDULE FOR A STRUCTURE USING AUTOCADD. PROCEDURE TO DRAW THE TABLES,USE LINE COMMAND OR RECTANGLE COMMAND TO DRAW DIVISIONS OF TABLE TO WRITE THE TEXT INSIDE THE TABLE, USE DT OR SINGLE LINE OR MULTILINE TEXT COMMAND. TO DRAW THE REINFORCEMENT DETAILS, USE CIRCLE FOR…
23 Sep 2021 03:38 PM IST
Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad
Q1. AIM AND INTRODUCTION TO DRAW THE DETAILED DIAGRAM OF PLAN, SECTION AND ELEVATION DETAILS OF THE GIVEN DIAGRAM USING AUTOCADD SOFTWARE. PROCEDURE USE XLINE COMMAND TO DARW THE BORDER OF THE STRUCTURE USE OFFSET COMMAND TO DRAW THE THICKNESS OF WALL OF THE STRUCTURE. USE LINE COMMAND TO DRAW THE WALLS…
05 Oct 2021 02:54 PM IST
Creating a Layout, Section and Elevation with dimensions using AutoCad
Q1. AIM AND INTRODUCTION TO DRAW THE PLAN AND SECTION OF A STRUCTURE WITH SUITABLE DIMENSION TECHNIQUES AND DIMENSION STYLES. PROCEDURE TO DRAW THE BORDER LINE OF A PLAN, USE XLINE COMMAND. TO DRAW THE INNER WALLS OF A STRUCTURE, USE LINE COMMAND AND OFFSET COMMAND. USE COPY, MOVE, ROTATE…
20 Oct 2021 07:59 AM IST
Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings
AIM AND INTRODUCTION TO DESIGN AND DRAFT A LAYOUT OF A RESIDENTIAL BUILDING OF PLOT SIZE 60'*20' WITH EAST FACING. PROCEDURE TO DRAW THE WALL AND WALL THICKNESS USE XLINE COMMAND. TO DRAW THE INNER WALLS USE LINE COMMAND TO MODIFY…
29 Oct 2021 12:24 PM IST
Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad
Q1. AIM AND INTRODUCTION: TO DRAW THE GIVEN STRUCTURES LIKE TABLES,TEXT AND DOOR STUCTURE USING BLOCKS AND ATTRIBUTES. PROCEDURE: TO DRAW THE LINES AND TABLES USING LINE COMMAND OR USE TABLES COMMAND TO INSERT TABLE.…
20 Nov 2021 06:51 AM IST
Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad
Q1.AIM AND INTRODUCTION: TO DRAW OR CREATE THE KITCHEN LAYOUT AND HATCHING OF ARCHITECTURAL ELEMENTS USING AUTOCADD DRAWING SOFTWARE. PROCEDURE: USE LINE COMMAND OR L COMMAND TO DRAW THE OUTER WALL OF KITCHEN LAYOUT. USE MODIFY COMMANDS LIKE COPY, MIRROR,MOVE, EXTEND,TRIM ETC TO CHANGE…
29 Nov 2021 09:49 AM IST
Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad
Q1.AIM AND INTRODUCTION: TO CREATE THE LAYOUT OF THE PLAN AND TO CONVERT THE MODEL DIAGRAM INTO LAYOUT FORM WITH ACCURATE SCALES. PROCEDURE: THE PROCEDURE IS FIRST TAKE THE PLAN THAT ARE ALREADY PREPARED AND CONVERT THEM FROM THE MODEL SPACE TO PAPER SPACE. SO,FIRSTLY OPEN THE LAYOUT…
06 Dec 2021 07:55 AM IST
Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad
Q1. AIM AND INTRODUCTION: TO CREATE A 3D ELEMENT WITH PROPER DIMENSION USING AUTOCADD 3D MODELLING SOFTWARE. PROCEDURE : FIRSTLY, TO CREATE A 3D ELEMENT CHOOSE THE 3D MODELLING OPTION IN THE TOOL BAR. THEN TAKE…
23 Dec 2021 07:47 AM IST
Creating 3D Isometric view of various structural elements in AutoCAD
Q1. AIM AND INTRODUCTION : TO DRAW THE ISOMETRIC VIEW OF THE GIVEN PLAN AND ELEVATION OF THE BULDING STRUCTURE USING AUTOCADD 3D MODELLING. PROCEDURE : FIRSTLY DRAW THE GIVEN PLAN AND ELEVATION OF THE GIVEN STRUCTURE USING 3D POLYLINE OR RECTANGLE COMMAND. THEN VIEW THE DRAWING IN 3D VIEW …
30 Jan 2022 05:19 AM IST
Project 2_Creating a 3D rendered model for a Residential Building in AutoCad
AIM AND INTRODUCTION : TO DRAW A 3 DIMENSIONAL MODEL OF THE RESIDENTIAL BUILDING USING AUTOCADD SOFTWARE. PROCEDURE : FIRSTLY DRAW THE PLAN OF A BUILDING USING RECTANGLE AND LINE COMMANDS. THEN USE DIMLIN COMMAND TO DRAW THE DIMENSIONS…
06 Feb 2022 05:15 AM IST
2 Course Certificates
Here are the courses that I have enrolled
Similar Profiles
Ladder of success cannot be climbed with hands in pocket.
The Future in Motion
Give more than what you get you will get more than what you gave
Avid learner