Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad

AIM AND INTRODUCTION :     TO DRAW A 3 DIMENSIONAL MODEL OF THE RESIDENTIAL BUILDING USING AUTOCADD                      SOFTWARE. PROCEDURE : FIRSTLY DRAW THE PLAN OF A BUILDING USING RECTANGLE AND LINE COMMANDS. THEN USE DIMLIN COMMAND TO DRAW THE DIMENSIONS…

Q1. AIM AND INTRODUCTION :        TO DRAW THE ISOMETRIC VIEW OF THE GIVEN PLAN AND ELEVATION OF THE BULDING STRUCTURE USING AUTOCADD 3D MODELLING. PROCEDURE : FIRSTLY DRAW THE GIVEN PLAN AND ELEVATION OF THE GIVEN STRUCTURE USING 3D POLYLINE OR RECTANGLE COMMAND. THEN VIEW THE DRAWING IN 3D VIEW …

Q1. AIM AND INTRODUCTION:          TO CREATE A 3D ELEMENT WITH PROPER DIMENSION USING AUTOCADD 3D MODELLING                     SOFTWARE. PROCEDURE : FIRSTLY, TO CREATE A 3D ELEMENT CHOOSE THE 3D MODELLING OPTION IN THE TOOL BAR. THEN TAKE…

Q1.AIM AND INTRODUCTION:          TO CREATE THE LAYOUT OF THE PLAN AND TO CONVERT THE MODEL DIAGRAM INTO LAYOUT FORM WITH ACCURATE SCALES. PROCEDURE: THE PROCEDURE IS FIRST TAKE  THE PLAN THAT ARE ALREADY PREPARED AND CONVERT THEM FROM THE MODEL SPACE TO PAPER SPACE. SO,FIRSTLY OPEN THE LAYOUT…

Q1.AIM AND INTRODUCTION:          TO DRAW OR CREATE THE KITCHEN LAYOUT AND HATCHING OF ARCHITECTURAL ELEMENTS USING AUTOCADD DRAWING SOFTWARE. PROCEDURE: USE LINE COMMAND OR L COMMAND TO DRAW THE OUTER WALL OF KITCHEN LAYOUT. USE MODIFY COMMANDS LIKE COPY, MIRROR,MOVE, EXTEND,TRIM ETC TO CHANGE…

Q1. AIM AND INTRODUCTION:            TO DRAW THE GIVEN STRUCTURES LIKE TABLES,TEXT AND DOOR STUCTURE USING BLOCKS               AND ATTRIBUTES.    PROCEDURE: TO DRAW THE LINES AND TABLES USING LINE COMMAND OR USE TABLES COMMAND TO INSERT TABLE.…

AIM AND INTRODUCTION          TO DESIGN AND DRAFT A LAYOUT OF A RESIDENTIAL BUILDING OF PLOT SIZE 60'*20' WITH                EAST FACING. PROCEDURE TO DRAW THE WALL AND WALL THICKNESS USE XLINE COMMAND. TO DRAW THE INNER WALLS USE LINE COMMAND  TO MODIFY…

Q1. AIM AND INTRODUCTION           TO DRAW THE PLAN AND SECTION OF A STRUCTURE WITH SUITABLE DIMENSION TECHNIQUES AND DIMENSION STYLES. PROCEDURE TO DRAW THE BORDER LINE OF A PLAN, USE XLINE COMMAND. TO DRAW THE INNER WALLS OF A STRUCTURE, USE LINE COMMAND AND OFFSET COMMAND. USE COPY, MOVE, ROTATE…

Q1. AIM AND INTRODUCTION     TO DRAW THE DETAILED DIAGRAM OF PLAN, SECTION AND ELEVATION DETAILS OF THE GIVEN DIAGRAM USING AUTOCADD SOFTWARE. PROCEDURE USE XLINE COMMAND TO DARW THE BORDER OF THE STRUCTURE  USE OFFSET COMMAND TO DRAW THE THICKNESS OF WALL OF THE STRUCTURE. USE LINE COMMAND TO DRAW THE WALLS…

Q 1. AIM AND INTRODUCTION TO DRAW THE COLUMN SCHEDULE FOR A STRUCTURE USING AUTOCADD. PROCEDURE TO DRAW THE TABLES,USE LINE COMMAND OR RECTANGLE COMMAND TO DRAW DIVISIONS OF TABLE  TO WRITE THE TEXT INSIDE THE TABLE, USE DT OR SINGLE LINE OR MULTILINE TEXT COMMAND. TO DRAW THE REINFORCEMENT DETAILS, USE CIRCLE FOR…

1.AIM AND INTRODUCTION To draw the outline plan of a residential building consisting of bedrooms, living, kitchen,parking,porche etc. using autoCADD. PROCEDURE first step while starting a diagram use command UNITS to change the units like feet,inches,milimeters etc from one another. then draw the border line of a plan…

1. Aim and Introduction To draw the given structure using autoCADD software. it allows the user to draw the structure of a building like plan, section etc. procedure to draw the line with specific dimension use line command in the home >draw>line or type L in the command box to get the line tool. to draw the circle…

1. Aim   To draw the footing  using auto CAD      Procedure used line command and copy and move command to draw the footing with correct dimensions and angles. 2. Aim  To draw the isolated footing using auto CAD  Procedure used line command and copy and move command to draw the footing…

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.  

design mix for M35 grade with fly ash Cement used=OPC 43 grade Grade of concrete = M35 Maximum nominal size of aggregate = 20mm Minimum cement content = 320 kg/m3 (from table 5 IS 456 2000 according to exposure condition) Maximum w/c ratio = 0.45(from table 5 of IS 456 2000 according to exposure condition) Workability…