1. Make a Simulink model of the Doorbell using a solenoid block with the following details. Door Bell:      Generally, an Electromagnetic device uses the solenoid(Electromagnetism). Principle:         Door Bell works on the principle of working electromagnetism. A metallic…

Washing Machine                          It is one of the heavy load home appliances, uses water and wash the clothes. But their is also dry cleaner and ultra-sonic cleaners.                        …

BAJA All terrain vehicle ATV model Aim:           To model the BAJA all terrain vehicle ATV, that being used in the competition. This model helps to check the working for their designed vehicle for getting the characteristics for different throttle condition using simulink. For this model we need…

PROJECT NO:1 BUCK CONVERTER IN CCM(Continuous Conduction Mode) Given:  Input Voltage range:40-50v Ouput Voltage:30v Power level:500W Lets take switching frequency of 20kHz because of using MOSFET as the switching device in this design of BUCK converter. Load Details:              …

Vehicle Direction Determination Aim:         Creating an project that detects the Vehicle direction depending on the sensed values of Camera and Steering Wheel input. Depending on the requirement list and Study the model for the response.  Description: General Overview: Identifying the direction…

Model: Adaptive Cruise Control (Subsystem) Load_Vehicle_Speed_Detector(Subsystem-Requirement 1) Driv_Vehilce(Subsystem-Requiremnt 2) Acceleration_Cruise_Control_Algorithm(Subsystem-Requirement 3) Requirement Manager Data Dictionary Model Advisor Check  Report Attached in the Project 2.zip file. Code Generation Code…

PROJECT 1: TRAFFIC ASSISTANT FEATURE Aim:           Implementing the algorithm of Traffic Assitant which based on the sensorhelps the driver arrives more relaxed at destination, even in dense traffic or in traffic jam. Objective: This model must be developed in MATLAB Simulink as per MBD guidelines.…

PROJECT 2: HIGHWAY ASSISTANT - LANE CHANGING ASSISTANT Aim:             Implementing the Highway Assistant Lane changing assiatant by understanding the given requiremnts. Objective: Model must be developed in MATLAB Simulink per MBD guidelines. Code Generation Profile must be AUTOSAR Coder.…

LITHIUM ION CELLS MATERIALS CHEMICAL REACTION 1. Lithium Cobalt Oxide (LCO) Active material - Lithium Cobalt Oxide (LCO) 90%. Binder - Polyvinylidene fluoride (PVDF) 5%. Conductive Carbon - Carbon Black 5%. Anode - `Li_nC_6 harr nLi^+ n e^(-) +C_6` Cathode - `Li_(1-n)CoO_2+nLi^++ n e^(-) harr LiCoO_2` Overall…

BATTERY MANAGEMENT SYSTEM (BMS)                   Battery management system is an electronic system that helps to manage the rechargeable battery cell, i.e., protecting the battery operation inside the safe operating area (SOA), sensing and monitoring the voltage, current and…

Given Cell datasheet of ANR26650M1-B below.   Cell Datasheet or Specification required for designing the battery pack: Cell Model  ANR26650M1-B Cell Name Nanophosphate® High Power Lithium Ion Cell Diameter 26 mm Height 65 mm Weight 76g Nominal Capacity 2.5 Ah Minimum Capacity 2.4 Ah Nominal Voltage 3.3 V…

Aim: Thermal modeling of battery pack consists of 10 cell are connected in series, Simulate the thermal effects and compare life cycle performance at various temperatures, charge and discharge rates using MATLAB. Taken Lithium ion Cell - NCR18650BD Sprcification: Cell Model  Panasonic NCR18650BD Nominal Voltage …

PROJECT :DATA HANDLING AND INTERPOLATION Aim: Handle the given data and interpolate the current value for given range of voltage. Interpolate by using the given experimental data to find the relative current for the range of voltage from -17.3V to 0.9V. Write the data on to text file ('Output.txt') Steps: Read the…