There are 3 methods to generate tetra meshing:  Conversation of 2D tria to tetrahedral elements, by using tetra mesh panel. Using the quick tetra mesh from utility panel. Using the volume tetra mesh panel.                             …

AIM : Mesh the side door component ( plastic component ) and assign thickness . OBJECTIVE :  Clean the geometrical error and fix or remove the deformation in the model. Extract the mid surface from the model ( manual mid surface ) Give the proper quality criteria  check for the features were minimum length…

Aim : To clean the geometry ,extract the mid surface and then mesh the geometry.  Objective : Clean the geometry. Extract midsurface. Clean midsurface geometry. Ignore holes less than dia 5mm. Create 2D mesh with target length 5mm, min 3.5mm max 7mm. Assign proper thickness, by creating a generic property. Procedure…

AIM : Mesh the floor panel and assign thickness . OBJECTIVE : Clean the geometrical error and fix or remove the deformation in the model.Extract the mid surface from the model ( manual mid surface )Give the proper quality criteria check for the features were minimum length will fail, and make changes according to criteria…

                                                                                           …

                                                                                           …

AIM:To Create a Door Arm Rest bazel from th given A Class Surface  and Add thickness of 2.5 mm to it and also carry out the draft Analysis of teh Component . SUMMARY:          This Project explain in brief regarding the Design life cycle followed in automotive industry by working on Practical…

AIM:To Create a Door Arm Rest and Added thickness to it SUMMARY:          This Project explain in brief regarding the Design life cycle followed in automotive industry by working on Practical Model Switch Bazel which is a Car interior trim Part.In this Report we have explain about the…

A Class Surface Tooling Axis Class B Surface Class C Surface Solid Surface Closed Body Draft Analysis

Aim: Attachment feature Creation of Console coin holder  

Aim:To create a solid body of a given Door Applique and Cetae the Locators and Heat Stakes on it as per design standard. Abstract: In this report we are goin to design the Car door applique which gives asthetic looks to the car.Once we design the applique we are going to design the locaters to arreset the degress of freedom…

AIM:To Create a Solid Body of B Piller Cover using Ctaia v5 Tool using give A Class Surface and Adding thickness to it.Also to create a Ribs and Locators as per the given Master section SUMMARY:          This Project explain in brief regarding the Design life cycle followed in automotive industry…

Aim:To design the Parts of quick return mechanism and Cinstant Velocity joint and Assemble all the Chile parts together.   MODEL 1 QUICK RETURN MECHANISM A quick return mechanism is an apparatus to produce a reciprocating motion in which the time taken for travel in return stroke is less…

AIM:To Create a Solid Body of B Piller Cover using Ctaia v5 Tool using give A Class Surface and Adding thickness to it.Also to create a Ribs and Locators as per the given Master section SUMMARY:          This Project explain in brief regarding the Design life cycle followed in automotive industry…