project is uploaded in the form of PDF attached below

the presentation and sketches are attached below in the document.

the report and project are attached below.

the dsign project is attached below

the project is attached below

the file is attached below.

the roadster project is attached below.

the file is attached below

the files are attached below

1. the technologies that we are currently using are Electrification of drivetrains, advanced IC engines for more power and fuel efficiency, and Artificial intelligence in automobiles which comes under autonomous vehicles. apart from these, there are many such technologies such as hybrid drivetrains and intelligent vehicles.…

the files are attached below

the files are attached below.

the files are attached below

the file is attached below.

the files are attached below

Project 9 - concept Design. the project is about MUV (multi utility vehicle) a MUV is mainly used for utility, sport and Load carrying capacity. the aim of the design is to design a modular utility vehicle so that it  can do all the things mentioned above. in utility cars there are various sub divisions eg.- SUV,…

please find the attachments below 

please find the attachments below

Please find the attachment for fender

please find the attachment below

please find the attachement below.

Concept Design. the project is about SUV a SUV is mainly used for utility, sport and Load carrying capacity. the aim of the design is to design a modular utility vehicle so that it  can do all the things mentioned above. in utility cars there are various sub divisions eg.- trucks, vans and Crossovers the design will…

Renders of The Sketches. Rendering or image synthesis is the process of generating a photorealistic or non-photorealistic image from a 2D or 3D model by means of a computer program. the basic reflections and rendering are done in sketches. Interiors Presenting the design process.

Technical Surfacing of KIA Sportage.   Objective-  To generate a class-A surface model of KIA Sportage using Autodesk Alias. Introduction – Concept modelling provides a perfect way to document and conveying the precise meaning to the end users. It is a way to conceptualize and represent a two-dimensional…

Rendering of KIA Sportage. Rendering or image synthesis is the process of generating a photorealistic or non-photorealistic image from a 2D or 3D model by means of a computer program. The kia sportage is Modelled and rendered in Alias. front   side rear   top perspective views  

Model Creation in Alias Abstract: To create a Model of SUV (Sport Utility Vehicle) in Alias 3D workbench. Approach: To create the sketches in paper or in autodesk sketchbook then creating technical drawing with proper proportions. importing the images into workbench, with proper alignment start working on building the…

Objective: To Create a CAD model in Spaceclaim and make it ready for 3D Printing. Idea: To create a minimalistic stand that supports a laptop.  steps: first the sketch was drawn on the sketcher workbench, the drawing is fully constrained. after drawing pull tool is used to pull the object and fillet is used wherever…

the drawing is created and the sketches are attached below.    

The images are drafted in AutoCAD and are attached here. Assembly

The Hood is a major part of automotive components, it acts as a crash structure as well as being a cover for the hood. there are multiple parts in the hood such as the outer pane - which is the outside Class A surface inner panel - which is the engineered component that acts as a crash component. hinge - it is used to…

section modulus: the ratio of the bending resisted by the section to the stress in the extreme fiber  why do we calculate section modulus? it is calculated so that we can know the stiffness and rigidity of the part/the component to make sure that we are optimizing our part to get the maximum stiffness and rigidity…

Wheel arch challenge: wheel arch calculation is done to make sure that our designs are properly meeting the regulation clauses by various bodies or countries. in this challenge, we are measuring the horizontal distance or the clearance between the wheel and the wheel arch, and the vertical distance or the gap between both…

Challenge: Fender Design Challenge. Aim: TO design mounting and drip area for the given class A surface of the fender and to create a solid model of the same. Objective: To create the drip area according to the dimension given to analyze the model and then determine the mounting points for the fixture to clean the class…

Aim: To design a Sheet Metal Roof and to design reinforcements for the same at appropriate positions.   Objective: To design a Roof and Reinforcements in CATIA and then evaluate/analyze the roof with basic prediction formulas. The tool used: CATIA Generative shape design workbench. background: An automobile…

What is an Under-body coating? Undercarriage painting is the process of protecting the underside of a car from the elements by adding a layer of some form of cover to the vehicle's undercarriage. A car is mostly made of metal and these metals are prone to corrosion and decay. Corrosion is the process by which these metals,…

Reply1) Selection of vehicles: The vehicles were selected with careful consideration based on Mr. Pughazhyendhii's requirements, he wanted a car that could seat 5, is suitable for daily city driving and 500 km driving once a month, and should fall within his budget of 8-10 million. He mentioned that he likes big cars and…

Aim: To design the casing model using the NX CAD Tools used: Tab Normal Cutout Bend Flange Break Corner Unbend Rebend Hole Dimple Bead Mirror Feature Flat Pattern Design Flowchart:    Images:

Aim: to create a box assembly in NX Brief: Box Assembly is the culmination of multiple parts that make up the desired model. The first part is the base, which is a hollow structure and its main purpose is to serve as a surface for storing any objects according to the given use case. Another element is the lid, which is…

Aim: To create the odd-shaped enclosure Brief: Sheet metal cabinets are widely used in the field of electrical design. You'll find them in everything from junction boxes to control panels for industrial machinery. Simple, versatile, and extremely durable, these enclosures are in high demand for electrical projects and…

Aim: Create a Bracket using NX CAD as per the design requirements and write a detailed report on the Sheet Metal Component with a good explanation of the Sheet Metal modeling tools applied during modeling. Brief:  The task is to create a bracket using NX cad and the provided design parameters. A bracket is a sheet metal…

Aim: Create a bracket as per the design requirements and attach images of all its standard views along with the model. Brief: create a bracket using the 2D images. The task is to create a bracket using NX cad and the provided design parameters. A bracket is a sheet metal component that is used in most industries for fastening…