AIM : The mix design calculation of M35 Grade Concrete with Fly ash & M50 grade concrete without Fly ash INTRODUCTION Concrete is the construction material consisting of cement, fine aggregate (sand) and coarse aggregate mixed with water which becomes harder with time. It is extensively used in modern…

AIM :  Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads…

AIM : Create the geometries from P1 to P2 using all the coordinates system methods.You need to use the Line tool to create the geometries. Where required you need to use the circle tool. Draw the profile and the trusses using any coordinate system methods  Introduction: Before going to the drawing we should know about…

C1 Cross Section of load bearing wall over spread footing AIM : To create cross section of load bearing wall over spread footing by using AutoCAD INTRODUCTION: The cross section of load bearing wall over spread footing using AutoCAD is created by lines and Rectangules.The Procedure and result should be written after creating…

  AIM To Draw the given geometric diagram in AutoCAD with different units of measurement Introduction  Types of units measurement in AutoCAD:- AutoCAD is extreamely flexible about drawing units, let us have them in our way AutoCAD's Length unit types are as Follows  DECIMAL UNITS:The decimal units can be represented as…

1) AIM : To Draw the layout of a residence plan  Introduction Residential Layout is ideal for students and practitioners of urban design, Planning, Engineering, Architecture, and Landscapes seeking a comprehensive guide to the theory and pratice of desigining and Layout residential areas  Commands Used : LimmaxCommand…

1)  AIM : To Create a Coloumn Shedule as shown in the figure  Procedure  Step 1:  Open AutoCAD and enter UN(Units Command) in command box and select type as engineering and precision as 0'-0.000'' Select line command and draw a line of 84' in X axis and a line of 21' in Y axis and complete bigger rectangular …

1) AIM: To draw the floor plans and sections using the proper dimensions techniques and dimension styles to                         document the projects  Introduction:  Plan and sections are different types of drawings used by architects to graphically represent a building design and constructions A plan drawing is drawning…

1) AIM: To Draw the elevation and details of a wardrobe a shown in the figure below,After sketching and to provide the dimensions and text with the use of layers  Procedure Step 1  Units are set to mm Limits and lim-max are also set  Zoom command is also used  Step 2 In the command line type rec>2800,2600 In the command…

Project 1 (AutoCAD) Q. Design and Draft a layout of a residential building with the following details:     a. Plot Size: 60’x20’(18.3m x6m)      b. Orientation- Facing East      c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections)…

1)  AIM : To create the templets and need to take the size of title block as per industry standerds and need to save them as a block            names as Custom 1_ title box and Custom 2_ title box. INTRODUCTION : Drawing templets files are drawing that store styles, settings, layers,…

Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.   AIM : To Create the kitchen layout and to also, use proper dimension techniques to…